Cars
Parts for sale

Date: 2/25/2024 3:23:03 PM Ref: 00098558
Various Engine Parts
BB Mopar Indy 440-1 cylinder heads
cnc ported 2.25 inlets 68cc chambers PAC 1916 springs Manley head bolts £2500 Ono
Comp 955 valve springs up to .710 lift only fitted for mock up never run £200
Comp 731-16 titanium retainers 1.500-1.550t springs. Mock up only £150
Smith Brothers 3/8 cup and ball push rods .145 wall 9.320 length unused £200
440 source (scat) 7.100 connecting rods ARP 2000 bolts used good £200
TCI Mopar BB to power glide flywheel and adapter £100
Contact: Cliff Turner
Country: United Kingdom
Email: click here
Tel: 07949 951414   


Date: 11/18/2023 8:56:08 AM Ref: 00098555
8/71 Littlefield Blower
Non striped-recent service overhaul by UK blowers
K valve- steel fuel lines to hat
Braided lines
Click adjuster
Blower restraints
Nostalgia bug catcher
Inlet manifold with new gaskets for BBC
RCD Belt guard with spare belts
BDS idler / pulley
In-line fuel filter
Pill tool with spare selection of pills
Selection of spare injector jets

£4,750 Ono
Contact: Gary
Country: United Kingdom
Email: click here
Tel: 07834 899452   


Date: 11/18/2023 8:54:12 AM Ref: 00098554
BBC 540 Dart Block
Dart M 4 bolt main
9.8” deck O ringed
Callie magnum crank 4.250” stroke
Comp cams blower cam 4017B/4024Br112.0+.0
Rcd timing gear set
Brodie BB2 Xtra heads o ringed ( slight damage easy repair)
Manley valves
Jessel roller rockers
Valve springs - pushrods
Rocker covers with RCD burn-down tubes.
Block and crank have all been checked and passed by Zane at Zannetec.
Milodon sump with heater fitted ( comes with 110v converter from 240v)
Moroso oil pump
Black mamba roller lifters
This will need new pistons, Con rods, rings and bearings to make it complete.

£7,500 Ono
Contact: Gary
Country: United Kingdom
Email: click here
Tel: 07834899452   


Date: 11/9/2023 5:52:04 AM Ref: 00098553
Oil for sale
I have a quantity of new oil for sale at a very low price:

Gulf Competition Oil 10W40 – 18 boxes of 4 x 5L containers (total 360L), usual total retail cost £5,543.00, for sale at only £1500 (approx. £4 / litre).

Gulf Competition Oil 15W50 – 19 boxes of 4 x 5L containers (total 380L), usual total retail cost £5,850.95, for sale at only £1580 (approx. £4 / litre).

Gulf Max Plus Oil 20W50 – 8 boxes of 4 x 4L containers (total 128L), usual total retail cost £927.68, for sale at only £385.00 (approx. £3 / litre).
Contact: Ian
Country: United Kingdom
Email: click here
Tel: +44 7470 396685   


Date: 11/3/2023 1:08:42 PM Ref: 00098552
SBC heads
Pair of Brodix Track 1 23-degree heads for SBC
£800
Contact: Steve
Country: United Kingdom
Email: click here
Tel:   


Date: 10/30/2023 3:51:58 PM Ref: 00098551
TSR Powerglide
Was serviced by Al O'Connor before it was last used, only did one run.
It has a larger clutch basket with extra clutch plates and Kevlar band. Really nice and clean box
Ready to race.
£4200
Contact: Steve
Country: United Kingdom
Email: click here
Tel: 07494 399983   


Date: 10/16/2023 10:19:33 AM Ref: 00098550
We're selling up - All for sale


BIG LIST FOR SALE - OFFERS INVITED


~~~ OFFERS WELCOME ON ALL
~~~ WILL DO DEALS FOR MULTIPLE ITEMS
~~~ WILL POST - YOU PAY SHIPPING

Photos on our Facebook page - https://www.facebook.com/bennettracinguk

Email questions to – [email protected] please

**************************************************************************************************

***Rolling Chassis***

Funny car, Altered chrome moly chassis built by SPITZER Race cars (10.2)

125" wheelbase.
Spitzer fabricated rear.
Aluminium 3rd member - 4:11 gears 35 spline shafts and spool
Chrome moly prop guard
Rear disc brakes
New aluminium puke tank
New aluminium fuel tank
BBC motor plate
DJ safety fire bottles and system plumbed
Front and rear wings
Bantam altered body only weighs 20lbs

Loads I am probably forgetting… please ask questions.

Various packages are available as a roller (body, tinwork, tanks etc etc)

£13k (enquire for details).

Photos here - https://www.bennettracing.co.uk/post/for-sale-10-2-chrome-moly-chassis-built-by-spitzer-race-cars?fbclid=IwAR2cRhGRxXPuxnLfFj7T3YJrfqkubU6XcF2tFzKSqWvjebHDKAwaImgxj6U

**************************************************************************************************

Funny car, Altered, 10.1e chrome moly chassis Steve Puleger chassis

125" wheelbase.
Suit Nostalgia funny car.
9" Ford rear end, Mark Williams billet 3rd member (40 spline spool).
Various packages are available as a roller (tin work, tanks, body etc).

Arrow straight chassis. ‘ex’ Bennett Racing Relentless Topolino. NEVER been in the wall or damaged.

(enquire for details).

£20k

**************************************************************************************************

***Fibreglass Bodies***

Avondale Composites '32 Fiat Topolino - tined, twin chute mounts, windows, painted (Google 'Bennett Racing topolino') - £1000

'48 Fiat Topolino - tined, twin chute mounts, wrapped (Google 'Venom racing altered') - note; we chopped at bulk head - £500

**************************************************************************************************

***Engines***

Big Block Chevy Complete Engine – hat to pan – fit it and fire it!

(NEW) New Century Block (solid, 55mm cam, .937" lifter bore)
(NEW) New Century Stage II Pro-Gear Drive Kit
(NEW) New Century Aluminum Wet Sump Oil Pan
(NEW) Fabricated Billet Rail Valve Covers with Valve Spring Oilers
(NEW) Comp Cams 55mm cam (custom spec, firing order swap, 18726543)
(NEW) Isky .936" lifters
(NEW) custom GRP 5300 rods (7/16 ARP L19 bolts .990” wrist pin)
(CRACK TESTED & CHECKED by Jeff Bull) Bryant BBC billet crankshaft - 4.250" stroke
(TESTED) MSD 44 amp mag
(FRESH) Morgan billet aluminium heads - titanium intake 2.375" - 1.88" exhaust - titanium retainers
Larry Miersch intake manifold with burst panel and new blower plate
Kobelco K11 (K9 case, K11 rotors) extensive Les Davenport mods - built for 29%
Custom aluminum injector made by us (we also have a low profile PSI one for sale)
DMPE billet spacer
DMPE restraint plate
DMPE blower guard
2.5" funny car style headers
Enderle 990 fuel pump
Brand new bearings throughout

LOADS MORE THAT I CAN'T REMEMBER NOW, ENQUIRE FOR INFORMATION.

BE PATIENT PLEASE, DAY JOB IS INSANE. THANKS.

£30K.

**************************************************************************************************

Big Block Chevy short block

Donovan D500 solid block
Donovan billet rail oil pan
Scat BBC 4.250" crankshaft - brand new - double keyway
Brooks 6.375" aluminium rods
Brand new – oil pump
Brand New JE pistons, rings, pins
New Comp cams camshaft
Crane 904” lifters (checked)
Moroso push rods
Timing case and gears
Fuel pump extension
Billet 6061 crank support
Rcd hub
Brand new bearings throughout

LOADS MORE THAT I CAN'T REMEMBER NOW, ENQUIRE FOR INFORMATION.

BE PATIENT PLEASE, DAY JOB IS INSANE. THANKS.

£15K.

**************************************************************************************************

Taylor Motorsports blower bag. 174cm total length. No longer required.
View product on here - https://www.taylormotorsports.com
£100.

**************************************************************************************************

Brand new Impact drag champ helmet

With Sfi helmet sock
With front restraint post
Size is medium.
Clear and orange visor.
Brand new. Never used.
Easy $900+

£350

**************************************************************************************************

Trick Titanium clutch can

Used Trick Titanium 6.3 SFI Bell Housing. It is 8.125" deep, equipped with a cross shaft assembly, throw-out bearing, candlestick, liner and covers for clutch adjustment.

Lenco transmission pattern. This bell housing retails at $3300.00 plus the cross shaft assembly, bearing, and sensor which is another $750.00. Re-cert at Trick Titanium is $195.00.

http://www.eurodragster.com/news/features/blogs/bennett_racing/bennett_racing_blog_058_large.jpg

£2,500

**************************************************************************************************

Crower 10.7” pedal 2 plate clutch

• 6 Finger
• Titanium pressure plate
• Titanium stands
• Chevy bolt pattern (no ring gear)
• Dial indicator for setting pressure plate height

Multiple spare floaters and discs. Can help setup too.

We had this working well, always 0.96 to 60 foot with 36” tyre @2200lbs.

£3,000

**************************************************************************************************

CS1 3 speed Lenco [course spline]

Cases new in 2009 (one season use)
With reverser, towers, blanket.
Spare sprags, gear sets, clutches and misc spares.

£3,500

**************************************************************************************************

RPM Performance data logger

RPM Performance data logger (INCLUDES – 8 Channel EGT Expansion Module)
DL10 Data Logger
12 channel
Easily upgradeable to 20 or 28 channels

Engine RPM sensor
Driveshaft RPM sensor
EGT sensors

We fitted but never used it.

£1,000

**************************************************************************************************

Geradot Upright Injector

Standard length opening
13.250 bolt centre
5.250 Butterflies
Square metering valve
All lines & nozzles
Throttle shaft, levers, stops

£1,200

**************************************************************************************************

BDS Polished Competition Blower 8-71

Fresh and ready to go – built by Kenny at Superpower Unlimited.
New bearings, gears, seals, teflon
Stage 4 (hard anodised rotors, inside case and bearing plate surfaces)

£3,500

**************************************************************************************************

Super-Mag IV - Large-cap & red top transformer.

Totally 'new' refurbed and tested by Spud at FIE.

5 amp.

Clockwise rotation (Chevy).

Mallory four-pin drive.

£1500

**************************************************************************************************

BBC Headers

2.25" diameter
Used but perfectly useable
BBC bolt pattern

£275.

**************************************************************************************************

NGK R6061-10 (5962) - Racing Spark Plugs.

111 x NGK R6061-10 (5962) - Racing Spark Plugs.

Never used. £500 for all or £60 for 10.

**************************************************************************************************

Advanced control devices Co2 shifter kit.

Advanced control devices Co2 shifter kit. Never used.

http://acddragparts.com/8203-5.html

£450.

**************************************************************************************************

JE Pistons Series 51 Wrist Pins 990-2930-18-51S

8. New.

£100.

**************************************************************************************************

81-1002 K&N FUEL/OIL FILTER.

Brand new. Only unboxed for photo.

£150.

**************************************************************************************************

Clevite P-Series Rod Bearings CB-743P-20.

8 sets available. New.

£50 each.

**************************************************************************************************

Sealed Power ‘Federal Mogul’ MA Series Main Bearings 4400MA

3 sets available. New.

£45 each.

**************************************************************************************************

King XP-Series Rod Bearings CR808XPND.

11 available. New.

£90 each.

**************************************************************************************************

King XP-Series Main Bearings MB556XP

11 available. New.

£100 each.

**************************************************************************************************

NGK Spark Plug BR10ES (4832).

9 available. New.

£40.

**************************************************************************************************

King HP-Series Main Bearings MB556HP.

7 sets available. New.

£90 each.

**************************************************************************************************

King HP-Series Main Bearings MB556HP010.

6 sets available. New.

£90 each.

**************************************************************************************************

King HP-Series Rod Bearings CR808HPN

13 sets available. New.

£75 each.

**************************************************************************************************

Cleavite H-Series Rod Bearings CB-743HD.

5 sets available. New.

£75 each.

**************************************************************************************************

King HP-Series Cam Bearings CS524HPT.

6 sets available. New.

£100 each.

**************************************************************************************************

MSD Three-Step Module Selectors 8737

£80 posted.

**************************************************************************************************

Moroso 20385 Drag Race Oil Pan.

Excellent condition - never DAMAGED
This is $807.90 new.

Oil Pan, Aluminum, Natural, 6 qt., Stroker Clearanced, Chevy, Big Block.

NPT fitting attachment. Accepts 4.75 in. stroke with aluminum rods. Fits 4 bolt main caps including front and rear.

£500.

**************************************************************************************************

PSI low profile magnesium injector

Very good condition.

Buyer pays shipping.

£1000

**************************************************************************************************

Cast aluminium big block Chevy valve covers
Great condition - very useable . £50

**************************************************************************************************

Big block Chevy harmonic balancer . £20

**************************************************************************************************

BIG BLOCK CHEVY. GEN 6 SUMP. £50.

**************************************************************************************************

STANDARD BIG BLOCK CHEVY RODS WITH BRAND NEW CAST PISTONS (+.30"). £250.

**************************************************************************************************

LUNATI CAMSHAFT.
Manufacturer's Part Number:10201
Cam Style:Hydraulic flat tappet
Basic Operating RPM Range:Idle-5,000
Intake Duration at 050 inch Lift:214
Exhaust Duration at 050 inch Lift:224
Duration at 050 inch Lift:214 int./224 exh.
Advertised Intake Duration:280
Advertised Exhaust Duration:290
Advertised Duration:280 int./290 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:0.501 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:0.527 in.
Valve Lift with Factory Rocker Arm Ratio:0.501 int./0.527 exh.
Lobe Separation (degrees):112
£125.

**************************************************************************************************

Lunati Performance Replacement Hydraulic Lifters 71817PR-16. £50.

**************************************************************************************************

CRANE CAMS CAMSHAFT AND LIFTER SET.
Lift: .484''/.515''
Advertised Duration: .260°/.272°
RPM Range: 1000-4800
£200.

**************************************************************************************************

Crane Mechanical Roller Lifters 13552-16.
Brand:Crane Cams
Lifter Style:Mechanical roller
Lifter Link Bars Included:Yes
Link Bar Type:Vertical
Lifter Outside Diameter (in):0.842 in.
Lifter Offset:None
Quantity:Sold as a set of 16.
Notes:Will fit big block applications other than listed, including 502, Donovan, and Rodeck 481.
£150.

**************************************************************************************************

BIG BLOCK CHEVY. GEN 6 REMOTE OIL ADAPTER. £50.

**************************************************************************************************

COMP Cams Valve Seals 504-16
£10.

**************************************************************************************************

DMPE Set-Back Plate. Well used but will still do someone a turn. £150

**************************************************************************************************

Mallory mag caps

Have 7 of these. They are the 'big' caps.

Same as these - https://www.alkydigger.net/proddetail.php?prod=AD-29774

Have loads of misc ignition leads too.

£50 takes the lot.

**************************************************************************************************

1/2" CARB SPACER. CAN'T REMEMBER DETAILS. £10.

**************************************************************************************************

1" CARB SPACER. CAN'T REMEMBER DETAILS. £10.

**************************************************************************************************

BLOWER STARTER MOUNT. £10.

**************************************************************************************************

Input shaft 8.5" long. Course spline. £75

**************************************************************************************************

FORD POP SPINDLES. £50.

**************************************************************************************************

FIBREGLASS FRONT END (FROM THE BANTAM ALTERED). £25.

**************************************************************************************************

0-100 psi gauge - we have 4 of these - brand new. £20 each

**************************************************************************************************

BENNETT RACING USED RODS. £10 EACH.

BENNETT RACING USED PISTONS. £10 EACH.

BENNETT RACING USED VALVES. £5 EACH.

**************************************************************************************************

MISC

Diesel generator
SDMO SD6000 TE XL 6KVA PORTABLE GENERATOR DIESEL
YANMAR ENGINE
MAX OUTPUT 5200W
OUTLET SOCKETS 230V AND 400V 16A
26LITRE FUEL TANK
SUPER-SILENT CANOPY
£650


Contact: Luke Bennett
Country: Essex, UK
Email: click here
Tel:   


Date: 10/4/2023 2:15:41 PM Ref: 00098549
Parts for sale
Rci transmission blanket out of tag used £50
Harmonic balancer mopar steel original used £50
Used wheels and tyres: 2 Weld racing rear wheels with Mickey Thompson Sportsman Pros used 28x12.5x15 15 inch 5x4.50 4.75 inch bolt circle mopar 7 half inch backspace £500
Jw torque converter 10inch 3800 stall used £400
Pure energy alternator fits Mopars part number 7509211 new £60
Buyer collects in person or can arrange pickup from Santa Pod
Contact: Simon
Country: United Kingdom
Email: click here
Tel: 07804 944774   


Date: 9/17/2023 5:13:05 PM Ref: 00098548
Ford 9” axle
Ford 9” axle with Strange shafts, has a non lsd diff. 4 linked. narrowed to 53.3” hub face to hub face (1355 mm)
in red paint.
£1000
Contact: William
Country: United Kingdom
Email: click here
Tel:   


Date: 9/7/2023 6:08:12 AM Ref: 00098547
BLOWN MOPAR ENGINE w/ TRANS FOR SALE!
470 cui blown alcohol wedge motor
Keith Black aluminum wet block (leaking) 4.467" bore, needs some work
Ohio Crankshaft 4340 3.75" forged steel 8-Bolt, balanced
Carillo 11.5 CR 670 gram pistons, pins, dykes rings
GRP 6.8" aluminum rods w/ coated bearings
Donovan gear drive w/ 6" pump extension
MSD Pro Mag 12 w/ box
Mopar Performance 4349600 solid heads 74 cc w/ Harland sharp offset roller rockers
Titanium 2.3" intake and 1.78" stainless exhaust valves
Enderle 110 alky pump
Hogan Sheet metal blower intake
System One billet oil pump
Moroso aluminum full length oil pan
New camshaft bearings, main bearings, rod bearings, new rings, new camshaft, springs and everything checked
Runs 7.34 @ 187 mph in a 2500 lbs. door car
REID Powerglide transmission w/ Mopar BB Housing
upgraded w/ Sonnex 10 clutch and more
Built 2017 just 4 seasons used. Nearly fresh w/ converter
we´re in the pits at the european finals!
ENGINE £12,000
TRANS £3.000
Contact: Dirk
Country: Germany
Email: click here
Tel: +49 152 567 10 268   


Date: 9/3/2023 6:58:57 AM Ref: 00098544
M/T Sportsman tyres
I have a pair of used M/T Sportsman 29.0x12.5x15 used tyres that would be ideal for setting up etc. If they’re any good to anyone, they’re free as long as you can collect them from the MK area.

Contact: Ian
Country: United Kingdom
Email: click here
Tel: 07946 216568   


Date: 8/28/2023 2:09:58 PM Ref: 00098543
stilleto steering rack gaiters
pair of new steering rack gaiters for stilleto dragster steering rack 1" inside diameter can take to euro finals £40
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 8/28/2023 5:54:26 AM Ref: 00098542
stroud 7 point harness
stroud 7 point harness bolt in as new used for 3 meetings sfi expired Sept 2020 £60 can take to euro finals
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 8/24/2023 11:46:55 AM Ref: 00098541
48 volt starter packs
48 volt battery packs for off board starters on blown motors 1 pack charges ok 1 will need acid or batterys
comes with 48 volt charger can take to euro finals £200
Contact: bert
Country: United Kingdom
Email: click here
Tel: +447956343980   


Date: 8/12/2023 3:05:00 AM Ref: 00098540
Blown Alcohol BBC for sale turn key / BBC mixed parts for sale
I would like to advertise my complete Blown Alcohol BBC engine turn key ready to race and I have some parts apart from the engine as well.

Details of the engine

Engine BBC 580ci
New Century alloy block never heart
Bore 4.530
Je blower pistons
Stroke 4.500
Crank Eagle blower spec double key way
Eagle I Beam steel rods blower spec
Std cam bore
ARC 4 stage dry sump system
Solid Brodix heads BB3X 380cnc
Lifters 904 Crower
T&D Rocker system
5” big and ugly
Blower 14/71 little field
Fresh MSD Pro Mag 20
Fresh MSD points box and coil
Fuel pump Enderle 990
FTI Flex plate
FTI blower setup converter

And there are some spare parts that will come with it as well.

This engine has all the good stuff in it and run 6.6sec with limited grip multiple times on a 285” dragster with a power glide setup and only 24 psi of boost on a safe setup.

It can go easy 6.2sec on a good track with decent grip.

This engine will be sold turn key ready to race, it has only 18 runs from last refresh and never had any issues.

BBC parts for sale

New MSD coil Pn 8261 HVC
Used MSD coil Pn 8201 pro power
Used Aeromotive fuel pump A2000
New MSD distributor cap
Used MSD ignition box 7AL plus Pn 27605
Used Canton Header Tank
Used M&M 14/71 blower without snout
Used Mallory Super Mags x2
Used Mallory points boxes x2
Used Mallory Coils x2
Used 48gal Nuke fuel pump
Used Top Fuel barrel valve
Used dual mag drive for Hemi
Used Weld race wheels 15x15 on 5x5 pcd magnum.
Used BBC Edelbroke exhausts set Pn 6550

I’m located in Malta but can arrange shipping with no issues.

We have photos of all parts and videos on the engine running.

Contact: James
Country: Malta
Email: click here
Tel: +356 99861026   


Date: 8/8/2023 11:58:21 AM Ref: 00098539
SBC 400ci block (used) and parts
SBC 400ci 4 bolt block, has been bored +30 (406) used, all good but rear main bearing cap oil pump thread not good.
Scat crank +20 mains, +30 con rod,
Ross forged flat top pistons +30 (95755)
Crower 5.7 I-beam rods.
Howard flat tappet cam 112642-10.
This is all stripped down and is all cleaned, it has been up in my shed wrapped in cling film for a number of years.
It was kept for spares, but now I am biting the bullet and buying a new block so I have the one in the car as a spare.

£950
Contact: Chris
Country: United Kingdom
Email: click here
Tel: 07967 673694   


Date: 7/4/2023 8:14:42 AM Ref: 00098538
400ci SBC methanol race engine
400ci small block Chevy complete engine
This engine is complete and race-ready, still in the car, and can be seen running.

Bow tie block
Dart Buick Ali heads
Dart intake manifold
BLP 950 methanol carb
Fuel log
Dedenbear electric water pump
BLP mechanical fuel pump
MSD crank trigger
Dedenbear air throttle stop
Engine completely refreshed with only 10 runs on it
New Ross racing pistons
New BME rods
New crower solid lifters
Cloyes performance timing kit
New total seal piston rings
Ali sump with oil heater
700hp
Ran 8.86 at 150mph in a 2400lb car

£10,000 complete with stainless steel headers
Contact: Simon
Country: United Kingdom
Email: click here
Tel: 07761 810646   


Date: 6/1/2023 9:16:35 AM Ref: 00098537
Torque converter and carburetor
JW torque converter 10 inch 3800 stall 440 mopar £500

Holley carburetor 4150 850 double pumper
£350

Collect in person or can arrange pickup at Santa Pod
Contact: Simon
Country: United Kingdom
Email: click here
Tel: 01933 624980 / 07804 944774   


Date: 5/31/2023 3:34:34 AM Ref: 00098536
CHEVROLET SMALL BLOCK HEADS
Chevrolet Small Block heads / Alum 23 Degree 200cc / Dart 11321113P Cylinder Head Aluminum Small Block Chevy Pro1 200cc 64cc 2.020″ x 1.600″ Straight Plug, Assembly w/ 1.550″ Dual Springs for Mechanical Roller Lifters (Cam)

£2150 or good offer

Brand new in box only opened to check but we opted to go with a different set of heads.

Collection from Manston, Kent or can ship

Call Dan for more details
Contact: Dan
Country: United Kingdom
Email: click here
Tel: 07793 531199   


Date: 5/24/2023 12:45:02 PM Ref: 00098535
Ford 302 Cleveland engine parts
All original 'as removed' from an Australian 302 Ford Cleveland as below.

Crank never ground 2.750" mains and 2.311 big ends. No rust. Stored oiled in a bag.

Full set of original 302 rods and pistons

Original 302 camshaft oiled bagged and stored.

No reasonable offer refused.
Parts in Bedfordshire
Contact: Richard
Country: United Kingdom
Email: click here
Tel: 07446 322375   


Date: 5/6/2023 6:11:14 PM Ref: 00098534
Fire suits and helmets
1x - Mens Extra Large Racequip 120 Series SFI3.2A/5 Trousers. New in Box, £180 (Cost me £228)

1x - Child G-Force 2 Piece Blue Single Layer 3.2A/1 Fire Suit , Size Large. New in Box - £200 (cost me £248)

1x Youth G-Force 2 Piece Blue Single Layer 3.2A/1 Fire Suit, Jacket is Youth Small and Trousers - Youth Medium.
Used Last Year - £100

1x - Used Racequip Pro15 Helmet. Snell SA2105, Size Large (59-60cm), comes with Clear and Blue Iridium Visors. £200

1x Used V2 Pro Helmet, Snell SA2015, Size 56-57cm (around forehead), comes with Clear and Blue iridium Visors. Has small chips of paint on the rear Lip from climbing out of roll cages. £100

Contact: Jan
Country: United Kingdom
Email: click here
Tel:   


Date: 4/13/2023 3:43:42 AM Ref: 00098532
Rover V8 engine for sale
Rover V8 engine with a Borg Warner automatic gearbox.
With carbs (SU)
Old stock, will need recommissioning.
Selling for friend
Open to reasonable offers.
Contact: Brian
Country: United Kingdom
Email: click here
Tel: 07837 985973   


Date: 3/26/2023 4:51:35 AM Ref: 00098531
Top Methanol engine for sale
Complete Keith Black Top Methanol racing engine with supercharger, Alan Johnson heads and intake, magnetos etc etc all included, can supply photos.

Engine is assembled apart from one cylinder head and charger so you can see the bottom end internally, just serviced.

situated in Malta, can help with shipping it.


Contact: Jason
Country: Malta
Email: click here
Tel:   


Date: 3/15/2023 5:35:00 AM Ref: 00098530
BIG LIST FOR SALE - OFFERS INVITED


~~~ OFFERS WELCOME ON ALL ~~~ WILL DO DEALS FOR MULTIPLE ITEMS ~~~

Photos on our Facebook page - https://www.facebook.com/bennettracinguk

Email questions to – [email protected] please

**************************************************************************************************

***Rolling Chassis***

10.2 chrome moly chassis built by SPITZER Race cars

125" wheelbase.
Spitzer fabricated rear.
Aluminium 3rd member - 4:11 gears 35 spline shafts and spool
Chrome moly prop guard
Rear disc brakes
New aluminium puke tank
New aluminium fuel tank
BBC motor plate
DJ safety fire bottles and system plumbed
Front and rear wings
Bantam altered body only weighs 20lbs

Loads I am probably forgetting… please ask questions.

Various packages are available as a roller (body, tinwork, tanks etc etc)

£15k (enquire for details).

Photos here - https://www.bennettracing.co.uk/post/for-sale-10-2-chrome-moly-chassis-built-by-spitzer-race-cars?fbclid=IwAR2cRhGRxXPuxnLfFj7T3YJrfqkubU6XcF2tFzKSqWvjebHDKAwaImgxj6U

**************************************************************************************************

10.1e chrome moly chassis Steve Puleger chassis

125" wheelbase.
Suit Nostalgia funny car.
9" Ford rear end, Mark Williams billet 3rd member (40 spline spool).
Various packages are available as a roller (tin work, tanks, body etc).

Arrow straight chassis. ‘ex’ Bennett Racing Relentless Topolino. NEVER been in the wall or damaged.

(enquire for details).

£20k

**************************************************************************************************

***Fibreglass Bodies***

Avondale Composites '32 Fiat Topolino - tined, twin chute mounts, windows, painted (Google 'Bennett Racing topolino') - £1000

'48 Fiat Topolino - tined, twin chute mounts, wrapped (Google 'Venom racing altered') - note; we chopped at bulk head - £500

**************************************************************************************************

***Engines***

Big Block Chevy Complete Engine – hat to pan – fit it and fire it!

(NEW) New Century Block (solid, 55mm cam, .937" lifter bore)
(NEW) New Century Stage II Pro-Gear Drive Kit
(NEW) New Century Aluminum Wet Sump Oil Pan
(NEW) Fabricated Billet Rail Valve Covers with Valve Spring Oilers
(NEW) Comp Cams 55mm cam (custom spec, firing order swap, 18726543)
(NEW) Isky .936" lifters
(NEW) custom GRP 5300 rods (7/16 ARP L19 bolts .990” wrist pin)
(CRACK TESTED & CHECKED by Jeff Bull) Bryant BBC billet crankshaft - 4.250" stroke
(TESTED) MSD 44 amp mag
(FRESH) Morgan billet aluminium heads - titanium intake 2.375" - 1.88" exhaust - titanium retainers
Larry Miersch intake manifold with burst panel and new blower plate
Kobelco K11 (K9 case, K11 rotors) extensive Les Davenport mods - built for 29%
Custom aluminum injector made by us (we also have a low profile PSI one for sale)
DMPE billet spacer
DMPE restraint plate
DMPE blower guard
2.5" funny car style headers
Enderle 990 fuel pump
Brand new bearings throughout

LOADS MORE THAT I CAN'T REMEMBER NOW, ENQUIRE FOR INFORMATION.

BE PATIENT PLEASE, DAY JOB IS INSANE. THANKS.

£30K.

**************************************************************************************************

Big Block Chevy short block

Donovan D500 solid block
Donovan billet rail oil pan
Scat BBC 4.250" crankshaft - brand new - double keyway
Brooks 6.375" aluminium rods
Brand new – oil pump
Brand New JE pistons, rings, pins
New Comp cams camshaft
Crane 904” lifters (checked)
Moroso push rods
Timing case and gears
Fuel pump extension
Billet 6061 crank support
Rcd hub
Brand new bearings throughout

LOADS MORE THAT I CAN'T REMEMBER NOW, ENQUIRE FOR INFORMATION.

BE PATIENT PLEASE, DAY JOB IS INSANE. THANKS.

£15K.

**************************************************************************************************

Taylor Motorsports blower bag. 174cm total length. No longer required.
View product on here - https://www.taylormotorsports.com
£125.

**************************************************************************************************

Brand new Impact drag champ helmet

With Sfi helmet sock
With front restraint post
Size is medium.
Clear and orange visor.
Brand new. Never used.
Easy $900+

£500

**************************************************************************************************

Trick Titanium clutch can

Used Trick Titanium 6.3 SFI Bell Housing. It is 8.125" deep, equipped with a cross shaft assembly, throw-out bearing, candlestick, liner and covers for clutch adjustment.

Lenco transmission pattern. This bell housing retails at $3300.00 plus the cross shaft assembly, bearing, and sensor which is another $750.00. Re-cert at Trick Titanium is $195.00.

http://www.eurodragster.com/news/features/blogs/bennett_racing/bennett_racing_blog_058_large.jpg

£2,500

**************************************************************************************************

Crower 10.7” pedal 2 plate clutch

• 6 Finger
• Titanium pressure plate
• Titanium stands
• Chevy bolt pattern (no ring gear)
• Dial indicator for setting pressure plate height

Multiple spare floaters and discs. Can help setup too.

We had this working well, always 0.96 to 60 foot with 36” tyre @2200lbs.

£3,000

**************************************************************************************************

CS1 3 speed Lenco [course spline]

Cases new in 2009 (one season use)
With reverser, towers, blanket.
Spare sprags, gear sets, clutches and misc spares.

£3,500

**************************************************************************************************

RPM Performance data logger

RPM Performance data logger (INCLUDES – 8 Channel EGT Expansion Module)
DL10 Data Logger
12 channel
Easily upgradeable to 20 or 28 channels

Engine RPM sensor
Driveshaft RPM sensor
EGT sensors

We fitted but never used it.

£1,000

**************************************************************************************************

Geradot Upright Injector

Standard length opening
13.250 bolt centre
5.250 Butterflies
Square metering valve
All lines & nozzles
Throttle shaft, levers, stops

£1,200

**************************************************************************************************

BDS Polished Competition Blower 8-71

Fresh and ready to go – built by Kenny at Superpower Unlimited.
New bearings, gears, seals, teflon
Stage 4 (hard anodised rotors, inside case and bearing plate surfaces)

£3,500

**************************************************************************************************

Super-Mag IV - Large-cap & red top transformer.

Totally 'new' refurbed and tested by Spud at FIE.

5 amp.

Clockwise rotation (Chevy).

Mallory four-pin drive.

£1650

**************************************************************************************************

BBC Headers

2.25" diameter
Used but perfectly useable
BBC bolt pattern

£300.

**************************************************************************************************

NGK R6061-10 (5962) - Racing Spark Plugs.

111 x NGK R6061-10 (5962) - Racing Spark Plugs.

Never used. £600 for all or £60 for 10.

**************************************************************************************************

Advanced control devices Co2 shifter kit.

Advanced control devices Co2 shifter kit. Never used.

http://acddragparts.com/8203-5.html

£500.

**************************************************************************************************

JE Pistons Series 51 Wrist Pins 990-2930-18-51S

8. New.

£100.

**************************************************************************************************

81-1002 K&N FUEL/OIL FILTER

81-1002 K&N FUEL/OIL FILTER.

Brand new. Only unboxed for photo.

£180.

**************************************************************************************************

Clevite P-Series Rod Bearings CB-743P-20.

8 sets available. New.

£50 each.

**************************************************************************************************

Sealed Power ‘Federal Mogul’ MA Series Main Bearings 4400MA

3 sets available. New.

£45 each.

**************************************************************************************************

King XP-Series Rod Bearings CR808XPND.

11 available. New.

£90 each.

**************************************************************************************************

King XP-Series Main Bearings MB556XP

11 available. New.

£100 each.

**************************************************************************************************

NGK Spark Plug BR10ES (4832).

9 available. New.

£40.

**************************************************************************************************

King HP-Series Main Bearings MB556HP.

7 sets available. New.

£90 each.

**************************************************************************************************

King HP-Series Main Bearings MB556HP010.


6 sets available. New.

£90 each.

**************************************************************************************************

King HP-Series Rod Bearings CR808HPN

13 sets available. New.

£75 each.

**************************************************************************************************

Cleavite H-Series Rod Bearings CB-743HD.

5 sets available. New.

£75 each.

**************************************************************************************************

King HP-Series Cam Bearings CS524HPT.

6 sets available. New.

£100 each.

**************************************************************************************************

MSD Three-Step Module Selectors 8737

£80 posted.

**************************************************************************************************

MOROSO BBC Billet Rail Valve Covers (Part 68345). Very good condition. SOLD

**************************************************************************************************

Callies Magnum 4340 Big Block Chevy crankshaft. 4.250" stroke. Used for 2 seasons then we spun bearing. Been machined 10 thou. Can include bearings too. SOLD

**************************************************************************************************

Moroso 20385 Drag Race Oil Pan.

Excellent condition - never DAMAGED
This is $807.90 new.

Oil Pan, Aluminum, Natural, 6 qt., Stroker Clearanced, Chevy, Big Block.

NPT fitting attachment. Accepts 4.75 in. stroke with aluminum rods. Fits 4 bolt main caps including front and rear.

£500.

**************************************************************************************************

PSI low profile magnesium injector

Very good condition.

Buyer pays shipping.

£1200ono

**************************************************************************************************

Cast aluminium big block Chevy valve covers
Great condition - very useable . £50

**************************************************************************************************

Big block Chevy harmonic balancer . £20

**************************************************************************************************

BIG BLOCK CHEVY. GEN 6 SUMP. £50.

**************************************************************************************************

STANDARD BIG BLOCK CHEVY RODS WITH BRAND NEW CAST PISTONS (+.30"). £250.

**************************************************************************************************

LUNATI CAMSHAFT.
Manufacturer's Part Number:10201
Cam Style:Hydraulic flat tappet
Basic Operating RPM Range:Idle-5,000
Intake Duration at 050 inch Lift:214
Exhaust Duration at 050 inch Lift:224
Duration at 050 inch Lift:214 int./224 exh.
Advertised Intake Duration:280
Advertised Exhaust Duration:290
Advertised Duration:280 int./290 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:0.501 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:0.527 in.
Valve Lift with Factory Rocker Arm Ratio:0.501 int./0.527 exh.
Lobe Separation (degrees):112
£125.

**************************************************************************************************

Lunati Performance Replacement Hydraulic Lifters 71817PR-16. £50.

**************************************************************************************************

CRANE CAMS CAMSHAFT AND LIFTER SET.
Lift: .484''/.515''
Advertised Duration: .260°/.272°
RPM Range: 1000-4800
£200.

**************************************************************************************************

Crane Mechanical Roller Lifters 13552-16.
Brand:Crane Cams
Lifter Style:Mechanical roller
Lifter Link Bars Included:Yes
Link Bar Type:Vertical
Lifter Outside Diameter (in):0.842 in.
Lifter Offset:None
Quantity:Sold as a set of 16.
Notes:Will fit big block applications other than listed, including 502, Donovan, and Rodeck 481.
£150.

**************************************************************************************************

BIG BLOCK CHEVY. GEN 6 REMOTE OIL ADAPTER. £50.

**************************************************************************************************

COMP Cams Valve Seals 504-16
£10.

**************************************************************************************************

DMPE Set-Back Plate. Well used but will still do someone a turn. £150

**************************************************************************************************

Mallory mag caps

Have 7 of these. They are the 'big' caps.

Same as these - https://www.alkydigger.net/proddetail.php?prod=AD-29774

Have loads of misc ignition leads too.

£100 takes the lot.

**************************************************************************************************

1/2" CARB SPACER. CAN'T REMEMBER DETAILS. £10.

**************************************************************************************************

1" CARB SPACER. CAN'T REMEMBER DETAILS. £10.

**************************************************************************************************

BLOWER STARTER MOUNT. £10.

**************************************************************************************************

Input shaft 8.5" long. Course spline. £75

**************************************************************************************************

FORD POP SPINDLES. £50.

**************************************************************************************************

FIBREGLASS FRONT END (FROM THE BANTAM ALTERED). £25.

**************************************************************************************************

0-100 psi gauge - we have 4 of these - brand new. £20 each

**************************************************************************************************

BENNETT RACING USED RODS. £10 EACH.

BENNETT RACING USED PISTONS. £10 EACH.

BENNETT RACING USED VALVES. £5 EACH.

**************************************************************************************************

MISC

Diesel generator
SDMO SD6000 TE XL 6KVA PORTABLE GENERATOR DIESEL
YANMAR ENGINE
MAX OUTPUT 5200W
OUTLET SOCKETS 230V AND 400V 16A
26LITRE FUEL TANK
SUPER-SILENT CANOPY
£650



Contact: Bennett Racing
Country: Essex, UK
Email: click here
Tel:   


Date: 2/19/2023 5:08:32 AM Ref: 00098529
PONTIAC V8 350/389/400/421/455 RACE PARTS
EDELBROCK PERFORMER RPM 72cc heads- New / never used.
Fits: 350/389/400/421/455 V8s
These have been semi race prepped - pocket ported, o-ring grooved for boost/high compression use (o ring grooves can be removed with a 15thou skim), bronze valve guides, hardened valve seats. Comes with a full new set of FERREA 6000 SERIES Stainless Steel race valves.
The heads just require the usual 3-angle valve job and guide hone to suit the valves.
£1500

*ALL PONTIAC USA Forged 4340 steel aftermarket crank, 4” stroke, BBC rod journals for better conrod and bearing availability, lightened and balanced, very little use (30 runs). Fits all 3” main 350/389/400 blocks, 1500HP capable.
£550

*CRANE CAMS SOLID ROLLER cam kit 260 / 270 duration @ .050. .625” lift kit, with Roller lifters and matching valve springs, new old stock, never fitted, fits 350/389/400/421/428/455 V8s
£350

*WENZLER TUNNEL RAM intake, new / never used, has been lightly ported for more flow, fits the above Edelbrock heads, can be used for dual carbs or as a custom EFI manifold.
£350

Build an easy 1500hp capable Pontiac combo using these parts
Will split parts -
Will accept £2500 for the complete package above.
Can box & pallet anywhere in the UK,
Contact: Nick
Country: United Kingdom
Email: click here
Tel:   


Date: 2/15/2023 6:39:53 PM Ref: 00098528
Pat Musi 605ci nitrous engine
Ford-based 605ci nitrous oxide engine with 2 fogger systems and 1 spray bar system in the plenum.

JW SFI bellhousing to fit a Powerglide is included. SVO steel block 10.320 deck with billet caps, Bryant crank, GRP connecting rods, Venolia pistons, Short block has 6 rounds since new, Moroso dry sump and 4 vane Vacuum pump, MSD distributor and trigger, Heads 10-degree Pro Stock with titanium valves and T&D rockers, Comp Cams 948 springs with titanium retainers, ported by Musi. Trend push rods, Pat Musi roller cam and lifter. Hogan custom sheet metal intake with 2 x Musi 1150 dominator, Sheet metal valve covers, Fluid damper, Mezier electric water pump.

Everything is in excellent condition, just lift in and drive.

The engine has run 6.78 s and 206.5 mph in a 2467 lbs car

Price 15000 GBP
Contact: Roger
Country: Sweden
Email: click here
Tel: +46 708731903   


Date: 2/10/2023 2:54:06 PM Ref: 00098525
Hemi and other parts
Hemi Copperfield dry sump and RCD dry sump pump - £1100.
Hemi BAE intake - £1100.
Hemi Cannister Motorsport on head valve spring removal tool - £600.
Stroud CS2 Lenco blanket good condition, no tag £150
Set of used pistons/rods/liners for BAE Hemi - £800 OBO

Contact: Mick
Country: United Kingdom
Email: click here
Tel: 07850 169812   


Date: 2/10/2023 2:39:47 PM Ref: 00098524
M5 PRO MOD BLOWER
For sale M5 Pro Mod blower with restraint in top plate. £5500 OBO
Call Mick.
Contact: Michael
Country: United Kingdom
Email: click here
Tel: 07850 169812   


Date: 1/24/2023 12:44:31 PM Ref: 00098523
14/71 Kobelco supercharger
14/71 Kobelco supercharger for sale, all freshed up , Carbon 3 hole injector head,
Stroud plate with straps.
Goes low 5.9 in the VooDoo Hemi Pro mod

Asking 11.500 euro
Contact: Marck
Country: Netherlands
Email: click here
Tel: 0031653400718   


Date: 1/14/2023 8:39:30 AM Ref: 00098522
Drag Engine 380 ci (850hp) ex-Tom Martino small block Chevy
380ci (850hp), Bow tie block, Buick heads, Sheet metal intake manifold, Custom roller cams, Jesel rocker gears, Titanium valves, NEW Davinci carbs, NEW GRP rods, NEW Wesico pistons, NEW Lunati crankshaft.
Ex-Tom Martino engine: https://martinoraceengines.com/
Location: Melbourne
Contact: Mike
Country: Australia
Email: click here
Tel: +61-403 994 148   


Date: 12/31/2022 2:52:09 PM Ref: 00098521
PROFOX SFI 15 fire suit
PROFOX SFItag 15 - 2 piece suit with undergarment, shoes, gloves and arm restraints, 2 years left in tag - worn only 2 times, small to medium as I am 5'6" and slim build
Would cost you £2000 to get here
Price £1000
Contact: Andy
Country: United Kingdom
Email: click here
Tel: 07970 274573   


Date: 12/4/2022 3:15:51 PM Ref: 00098520
Hemi crankshaft and parts.
Velasco Hemi crankshaft, A-Fuel, 3.535 stroke, used, in good shape.
Comes with matching splined hub and crank gear.
700€
Pete Jackson Hemi/big block Mopar gear drive:125€
2 sets of used solid roller lifters,in good shape:300€ a set
Hurst pistol grip forward pattern shifter, fits Torqueflite 727, Ford, AMC/Chrysler 904. Complete and in perfect shape, never used:400€
Pics upon request.
Contact: Cyril
Country: France
Email: click here
Tel:   


Date: 11/24/2022 11:37:18 AM Ref: 00098518
MSD locked Dizzy
SBC locked Dizzy 85501 little use. £280.00, collection from Oxford
Contact: Sean
Country: United Kingdom
Email: click here
Tel: -   


Date: 11/24/2022 11:35:47 AM Ref: 00098517
Vortech v3 supercharger
SBC Vortech v3 kit complete kit with two Crankshaft pulleys, and brackets for fitting. Top hat KN filter, two bottles of supercharger oil. Running 5psi pulley. Little use. £2700.00. Collection from Oxford
Contact: Sean
Country: United Kingdom
Email: click here
Tel: -   


Date: 11/15/2022 12:14:10 PM Ref: 00098516
Used Hemi parts
Used Hemi parts for old BAE fuel heads, 2 sets of stands(one red, one blue), shafts, rockers (mix of stock style, DLI roller, others unknown brand), Manley intake and exhaust valves, Crane valve springs, retainers, locks, tapered pushrods: €2000 for the lot.

Set of Venolia pistons and rod assemblies for 4.5 stroke, standard deck block, 4.310 bores, 86cc dome. Unknown number of runs: €1000 for the set.

Pics and extra info available.
Contact: Cyril
Country: France
Email: click here
Tel:   


Date: 11/10/2022 3:20:41 PM Ref: 00098515
10.7 Molinari 3 disc Pro Mod clutch
10.7 Molinari 3 disc Pro Mod clutch with spare parts, clutch is fresh, new floaters for sale €3500
Contact: Norbert
Country: Germany
Email: click here
Tel: + 49 172 4373601   


Date: 10/25/2022 4:55:09 AM Ref: 00098514
Mallory 4cyl spring mag & transformer (new)
Brand new Mallory sprint mag and transformer with wiring etc, has been dry stored for many years (comes with used but good cond VW/Porsche/Volvo etc mag base/drive)
£600 Ono
Contact: Mark
Country: United Kingdom
Email: click here
Tel:   


Date: 10/8/2022 3:36:38 PM Ref: 00098513
MSD Three-Step Module Selectors 8737
For sale.

MSD Three-Step Module Selectors 8737

£80 posted.
Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:40:02 PM Ref: 00098510
King HP-Series Cam Bearings CS524HPT.

For sale.

King HP-Series Cam Bearings CS524HPT.

6 sets available. New.

£100 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:39:13 PM Ref: 00098509
Cleavite H-Series Rod Bearings CB-743HD.

For sale.

Clevite H-Series Rod Bearings CB-743HD.

5 sets available. New.

£75 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:38:14 PM Ref: 00098508
King HP-Series Rod Bearings CR808HPN


For sale.

King HP-Series Rod Bearings CR808HPN

13 sets available. New.

£75 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:37:24 PM Ref: 00098507
King HP-Series Main Bearings MB556HP010.

For sale.

King HP-Series Main Bearings MB556HP010.

6 sets available. New.

£90 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:36:27 PM Ref: 00098506
King HP-Series Main Bearings MB556HP.

For sale.

King HP-Series Main Bearings MB556HP.

7 sets available. New.

£90 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:35:30 PM Ref: 00098505
NGK Spark Plug BR10ES (4832).

For sale.

NGK Spark Plug BR10ES (4832).

9 available. New.

£40.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:34:39 PM Ref: 00098504
King XP-Series Main Bearings MB556XP

For sale.

King XP-Series Main Bearings MB556XP.

11 available. New.

£100 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:33:36 PM Ref: 00098503
King XP-Series Rod Bearings CR808XPND.


For sale.

King XP-Series Rod Bearings CR808XPND.

11 available. New.

£90 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:32:31 PM Ref: 00098502
Sealed Power ‘Federal Mogul’ MA Series Main Bearings 4400MA

For sale.

Sealed Power ‘Federal Mogul’ MA Series Main Bearings 4400MA.

3 sets available. New.

£45 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:31:58 PM Ref: 00098501
For sale. Sealed Power ‘Federal Mogul’ MA Series Main Bearings 4400MA. 3 set
Type the text of your ad here.
Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:31:12 PM Ref: 00098500
Clevite P-Series Rod Bearings CB-743P-20.

For sale.

Clevite P-Series Rod Bearings CB-743P-20.

8 sets available. New.

£50 each.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:30:14 PM Ref: 00098499
81-1002 K&N FUEL/OIL FILTER

For sale.

81-1002 K&N FUEL/OIL FILTER.

Brand new. Only unboxed for photo.

£180.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:29:10 PM Ref: 00098498
JE Pistons Series 51 Wrist Pins 990-2930-18-51S

For sale.

JE Pistons Series 51 Wrist Pins 990-2930-18-51S

8. New.

£100.


Contact: Luke Bennett
Country: Uk
Email: click here
Tel:   


Date: 10/8/2022 1:27:44 PM Ref: 00098497
Advanced control devices Co2 shifter kit.

Advanced control devices Co2 shifter kit. Never used.

http://acddragparts.com/8203-5.html

£500.


Contact: Luke Bennett
Country: Uk.
Email: click here
Tel:   


Date: 10/8/2022 1:25:52 PM Ref: 00098496
NGK R6061-10 (5962) - Racing Spark Plugs.

111 x NGK R6061-10 (5962) - Racing Spark Plugs.

Never used. £600 for all or £60 for 10.
Contact: Luke Bennett
Country: UK
Email: click here
Tel:   


Date: 10/3/2022 4:33:04 AM Ref: 00098495
Big Block Chevy 496 and spare block
ICE built 496 chevy engine, made 680hp on the dyno n/a
Refreshed beginning of 2021 and only has around 30 passes on it. Best of 9.6 on the motor and 7.9 on nitrous in a street car. we've just serviced and checked it and it's ready to rock. Still in the car so can be seen running and driving
4 bolt block, o ringed and copper head gaskets, Milodon full-length pan, Eagle crank and rods, JE 12.5:1 pistons, hellfire rings, World product grumpy Jenkins Steel heads with some porting work by ice, ss severe valves, Crower hippo roller lifters, roller rockers, Jesel girdle, Edelbrock victor manifold,1050 Holley. MSD distributor and wires.
carb to pan no ancillaries.
Also a spare +30 4 bolt block in excellent condition, pair of peanut port heads, spare used lifters,+60 pistons and some new rings.£7900 ono
Contact: Dave
Country: United Kingdom
Email: click here
Tel:   


Date: 9/29/2022 3:12:06 AM Ref: 00098494
3 speed CS1 gearbox
3-speed CS1, all checked over, shift pods attached, reverser, shift lever in place. Formerly in Alcohol FC. £2500.
Contact: Paul
Country: United Kingdom
Email:
Tel: 07770 773408   


Date: 9/27/2022 2:04:14 PM Ref: 00098493
Ford engine parts
Ford 351w Canton 9 quart sump with baffles and gates for full oil control street /race. Canton 15-680 used - £160
Ford 289/302 new alloy water pump CNC impeller and flows double a std one. New in box, passenger side pipe exit - £165
Ford 302. New adjustable timing gear Comp cams 0 to 7 degree adjustable. 302 84 to 92 - £100
Aylesbury
Contact: Bill
Country: United Kingdom
Email: click here
Tel: 07956 176026   


Date: 9/27/2022 1:59:23 PM Ref: 00098492
BF Goodrich truck tyres
4 x BFG Rugged Terrain LT265/70R17 M+S truck tyres
From my 2005 4x4 Dodge Ram pick-up. These are the correct factory-fitted items
Big & chunky in very good condition with nearly new depth of tread.
Only removed as I had to fit heavier duty commercial spec'd tyres to the truck for very heavy trailer towing.
Photos available
Make me a sensible offer and you can take them away.
Contact: Chris
Country: United Kingdom
Email: click here
Tel:   


Date: 9/26/2022 11:19:11 AM Ref: 00098491
512 big block Mopar
For sale £10,000 Mopar 512ci RB.
• Block: 1970 440 cold weather Industrial Block with ARP main studs and billet steel main caps, finish honed with Torque Plate fitted.
• Crank: 440 Source 4.250 Stroke, 4340 forged steel.
• Rods: 440 Source H beam 6.760 long with 7/16” ARP 2000 bolts.
• Pistons: 440 Source forged Flat top .030 over 4cc dish .990 pins. Compression with 40 thou head gasket is 11.4:1.
• Moly file fit piston rings.
• 440 Source SFI flex plate and Damper.
•Rotating assembly has just had full race balance.
• Comp Cams, Mechanical Roller XR292R .582/.588 lift, 292/297 duration with comp roller lifters, matching valve springs for the cam.
• Billet dual roller timing chain set.
• Trick flow intake manifold.
• Brand new Pro Systems 4150 custom built carb.
• MSD pro billet distributor and bronze intermediate drive.
• Sheet metal fabricated rocker covers.
• Billet timing cover.
• Heads: Edelbrock RPM, port matched ,81cc chambers.
• Harland Sharpe 1.5 ratio Roller Rockers.
• Comp Cams 10° retainers and locks.
• Stainless intake and exhaust valves.
• Trend Performance custom length Pushrods.
• Milodon high volume oil pump.
• 8 Quart Milodon sump.

Ready for assembly as is, £10,000 or Assembled £12,000. all machine work carried out, was going into my 64 Plymouth Fury but have sold the car. All spec'd to be a pump gas street/ strip motor. Perfect for Nostalgia Super Stock and/or street use.

Also available:
£2000, Hughes 11” 3500 stall convertor and reverse pattern manual valve body 727 Torqeflite built by Dave Bishop.
PATC Max Lug Pump gear, 4 pinion front and rear planet assys, Bolt in sprag.
Contact: Daniel
Country: United Kingdom
Email: click here
Tel:   


Date: 9/5/2022 8:20:04 AM Ref: 00098488
Parts for sale
BB CHEVY FULL GASKET SET
FS8180-9 new unopened £80 each
SB CHEVY HEADERS
HEADMAN. PN. 65101 £200
Unknown brand Chevelle 68/69 £200
SB CHEVY MOROSO ROCKER COVERS £80 used
SB Chevy torker intake £120
2 Chevy TH 350 out of running cars £500 each
Muncie £650
Chevy propshafts 4 off £100
1966 Chevelle vfn fibreglass bonnet hinge type and bumpers .£250
Plus metal floor pans
Chevelle 68/69 exhaust system front to back 3inch £300
70/72 Chevelle rear 1\4 skin L/H £90
Chevy Centreline wheels 10x15 with tyres £300
Chevy Centreline wheels 8x15. £400
ARE wheels chevy with old slicks £140
Hoosier Quicktimes 275/60x15 new £250
Contact: Steve
Country: United Kingdom
Email: click here
Tel: 07778 509789   


Date: 9/2/2022 2:43:24 PM Ref: 00098487
56 Desoto gearbox
Complete with bellhousing, torque converter and linkage.
£100
Contact: Rob
Country: United Kingdom
Email: click here
Tel: 07877 896783   


Date: 8/23/2022 2:37:10 PM Ref: 00098486
Chevy engines
Chevy BB 461 cu
3/8 HD rods, ARP bolts,30 over Speedpro hypereutetic pistons with 1/8 dome coated skirts, Speedpro plasma poly rings, Clevite bearings, crank 010/010 Melling high volume oil pump hardened drive, Comp cams extreme energy hydraulic cam with 553 lift, Speedpro lifters, Cloyes double roller, Crane valve springs, Comp cam push rods and retainers, long slot rockers,781 oval port heads with 3 angle valve job, torker intake, Comp cams cast rocker covers, Aluminium water pump, Holly fuel pump, HEI flame thrower distributor, mini starter, Holley carb, Flex plate, Casting number 3998289
£3,000

Chevy SB
355 4 bolt block 3970010, steel crank,
Iron heads complete turn key engine. Was running when taken out of car
£2,000

Also: have some BB Chevy 4 bolt blocks
2 complete engines rebuilders
Turbo TH 400
Turbo TH 350
Contact: Steve
Country: United Kingdom
Email: click here
Tel: 07778 509789   


Date: 7/14/2022 3:41:33 PM Ref: 00098484
Drag rear wheels
5 stud Chevy pattern with M/T ET Drag slick tyres 295/11.5-15
Less than half used
£100 each Ono

Tel 07977 729273/07954 000867
Contact: Dicko
Country: United Kingdom
Email: click here
Tel: See above   


Date: 7/13/2022 4:13:25 AM Ref: 00098483
Mallory Supermag 111 Ignition
Mallory Supermag 111 Ignition, as new in carry case, unused.
£999
tel 07977 729273/07954 000867
Contact: Dicko
Country: United Kingdom
Email: click here
Tel: See above   


Date: 6/30/2022 11:07:00 AM Ref: 00098480
T&D Roller Rockers for B1 heads
Brand new bought from Koffel’s Place paired T&D 1:7 ratio roller rockers part #8013 with all fittings and instructions, never even been fitted looking for £2000 ono please call text or e-mail
Contact: Jim
Country: United Kingdom
Email: click here
Tel: 07961 401759   


Date: 6/27/2022 2:18:38 PM Ref: 00098479
Pro Mod Aluma Star wheels
Pro Mod Aluma Star wheels for sale
Front 3,5x15 with tires
Back 16x16x5 Beadlock with tires
Need polish work
2500€
Contact: Norbert
Country: Germany
Email: click here
Tel:   


Date: 6/26/2022 7:59:15 AM Ref: 00098478
Holley 650 cfm Demon carb
Holley 650 cfm Demon carb, it's all there, I’ve never used it, old stock £275
Contact: Brian
Country: United Kingdom
Email: click here
Tel: 07837 985973   


Date: 6/15/2022 9:14:15 AM Ref: 00098477
Simpson Head & Neck Restraint
Simpson Hybrid
Woman's size medium
Brand new still in box, comes with hands
tethers and Simpson quick release tethers.
£500.00
Contact: Iain
Country: United Kingdom
Email: click here
Tel: 07513 270046   


Date: 6/7/2022 7:39:04 AM Ref: 00098476
Big Block Chevy parts
Big Block Chevy rotating assembly
Eagle Forged Crankshaft 20thou grind, fresh.
Callies Ultra Rods 6.385
Forged pistons 4.30"
Comp Cams Solid Roller Cam
#11-740-9
£1400.00
May split if enough interest
West Malling Kent
Contact: Andy
Country: United Kingdom
Email: click here
Tel: 01634 717370   


Date: 6/7/2022 6:05:37 AM Ref: 00098475
EFI parts for sale
2no set of 8 Moran Atomiser 3 Injectors, 325lb/hr, boxed. cleaned and ready to go £1200 per set.
1no Motec E816 - used good condition £400
1no Holley Injector Drive module Part # 554-143 - new, never used/fitted comes with fully wiring harness and connectors - £300
1no Dedenbear BBC electric water pump - front mounted male AN outlet £100
2no Weld Alumastar Chevy pattern wheel centres - brand new, never fitted - £200

Collection West Midlands, from Santa Pod or post at buyer cost.
Contact: Dave
Country: United Kingdom
Email: click here
Tel:   


Date: 5/18/2022 4:42:42 AM Ref: 00098474
3 altered bodies for sale (all tined)


Avondale Composites '32 Fiat Topolino - tined, twin chute mounts, windows, painted (Google 'Bennett Racing topolino') - OFFERS WELCOMED

Photos here - http://www.eurodragster.com/news/features/blogs/bennett_racing/2014.asp

-----

'48 Fiat Topolino - tined, twin chute mounts, wrapped (Google 'Venom racing altered') - note; we chopped at bulk head - OFFERS WELCOMED

-----

'32 Bantam - only weighs 20lb - very lightweight, ali wing added, bulkhead - OFFERS WELCOMED

-----

PICTURES ALSO HERE - http://www.eurodragster.com/news/features/blogs/bennett_racing/2014.asp





Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 5:50:02 AM Ref: 00098473
BBC Headers

2.25" diameter
Used but perfectly useable
BBC bolt pattern

Photo here - http://www.eurodragster.com/news/features/blogs/bennett_racing/bennett_racing_blog_173_large.jpg

£300.


Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 5:43:43 AM Ref: 00098472
Super-Mag IV - Large-cap & red top transformer.


Super-Mag IV - Large-cap & red top transformer.

Totally 'new' refurbed and tested by FIE.

5 amp.

Clockwise rotation (Chevy).

Mallory four-pin drive.

Lovely piece.

Photo here - http://www.eurodragster.com/news/features/blogs/bennett_racing/bennett_racing_blog_101_large.jpg

£1650



Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 5:33:16 AM Ref: 00098471
BDS Polished Competition Blower 8-71


BDS Polished Competition Blower 8-71
Fresh and ready to go
New bearings, gears, seals, teflon
Stage 4 (hard anodised rotors, inside case and bearing plate surfaces)

Photo here - http://www.eurodragster.com/news/features/blogs/bennett_racing/bennett_racing_blog_100_large.jpg

£3,500



Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 5:26:53 AM Ref: 00098470
Geradot Upright Injector


Standard length opening
13.250 bolt centre
5.250 Butterflies
Square metering valve
All lines & nozzles
Throttle shaft, levers, stops

PHOTO HERE - http://www.eurodragster.com/news/features/blogs/bennett_racing/bennett_racing_blog_100_large.jpg

£1,200


Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 5:18:46 AM Ref: 00098469
RPM Performance data logger


RPM Performance data logger (INCLUDES - 8 Channel EGT Expansion Module)
DL10 Data Logger
12 channel
Easily upgradeable to 20 or 28 channels

Engine RPM sensor
Driveshaft RPM sensor
EGT sensors

We fitted but never used it.

£1,000




Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 5:13:05 AM Ref: 00098468
CS1 3 speed Lenco [course spline]

CS1 3 speed Lenco [course spline]

Cases new in 2009.
With reverser, towers, blanket.
Spare sprags, gear sets, clutches and misc spares.

£3,500


Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 5:08:40 AM Ref: 00098467
Crower 10.7" pedal 2 plate clutch


Crower 10.7" pedal 2 plate clutch

• 6 Finger
• Titanium pressure plate
• Titanium stands
• Chevy bolt pattern (no ring gear)
• Dial indicator for setting pressure plate height

Multiple spare floaters and discs. Can help setup too.

We had this working well, always 0.96 to 60 foot with 36" tyre @2200lbs.

£3,000


Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 4:57:48 AM Ref: 00098466
Trick Titanium clutch can


Used Trick Titanium 6.3 SFI Bell Housing. It is 8.125" deep, equipped with a cross shaft assembly, throw-out bearing, candlestick, liner and covers for clutch adjustment.

Lenco transmission pattern. This bell housing retails at $3300.00 plus the cross shaft assembly, bearing, and sensor which is another $750.00. Re-cert at Trick Titanium is $195.00.

http://www.eurodragster.com/news/features/blogs/bennett_racing/bennett_racing_blog_058_large.jpg

£2,500


Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/13/2022 4:43:42 AM Ref: 00098465
Big Block Chevy Engine


(NEW) New Century Block (solid, 55mm cam, .937" lifters)
(NEW) New Century Stage II Pro-Gear Drive Kit
(NEW) New Century Aluminum Wet Sump Oil Pan
(NEW) Fabricated Billet Rail Valve Covers with Valve Spring Oilers
(NEW) Comp Cams 55mm cam
(NEW) Isky .936" lifters
(NEW) custom GRP 5300 rods (7/16 ARP L19 bolts .990” wrist pin)
(CRACK TESTED & CHECKED) Bryant BBC billet crankshaft - 4.250"
(TESTED) MSD 44 amp mag
(FRESHENDED & SKIM) Morgan billet aluminium heads - titanium intake 2.375" - 1.88" exhaust - titanium retainers
Larry Miersch intake manifold with burst panel
Kobelco K11 (K9 case, K11 rotors) extensive Les Davenport mods - built for 29%
Custom aluminum injector
DMPE billet spacer
DMPE restraint plate
DMPE blower guard
2.5" funny car style headers
Enderle 990 fuel pump

LOADS MORE THAT I CAN'T REMEMBER NOW, ENQUIRE FOR INFORMATION.

BE PATIENT PLEASE, DAY JOB IS INSANE. THANKS.

£30K.


Contact: Bennett Racing
Country: UK
Email: click here
Tel:   


Date: 5/11/2022 5:18:15 PM Ref: 00098464
1400hp/1900ft/lb Duramax Diesel Engine complete and ready to run.
One of the fastest Duramax diesels on the planet, way too much to list all.
Forged crankshaft, Howard billet rods, Ross piston, ARP CA625+ studs, CNC ported heads.
All Manton valve gear, Custom Compound turbo setup, Exergy 150% over stock Bosch motorsport injectors, ATI balancer, billet flexplate, twin stroked CP3 pumps, Peterson 5 stage dry sump, complete management and all wiring loom, MeanGreen starter and Alternator, the bellhousing is standard Chevy so all Th350/400/Powerglides bolt straight up.
The engine is in perfect condition and ready for a new home and would be very happy in a street truck or car.
Makes around 1400hp and powered a 3300lb truck to 7.81 @ 179mph
Looking for around £14000, the injectors and the CP3 pumps were close to $10 thousand on their own, I’m not looking to get my money back I just want it to go to a good home.
If you need more info, please call in work hours.
Contact: John
Country: United Kingdom
Email: click here
Tel: 07976 751742   


Date: 5/8/2022 5:44:54 PM Ref: 00098463
Mickey Thompson slicks
For sale, a pair of M/T slicks, 14in wide 31 in high 15 runs, 30% worn. £150. Contact Steve.
Contact: Steve
Country: United Kingdom
Email: click here
Tel: 07860 375500   


Date: 5/1/2022 11:15:55 AM Ref: 00098462
stilleto steering rack gaiters
stilleto steering rack gaiters for dragster and funny car rack £45
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 4/19/2022 9:18:17 AM Ref: 00098461
DMPE Kobelco Superman 2" Set-Back Plate


Well used but will still do someone a turn.

Set back plate Kobelco Superman pie bottom.

'It is made from 1/2" alum. plate and uses 7/16" flathead bolts to mount the plate to the manifold, then a set of holes are drilled back 2.00" inches from the stock locating holes to move the supercharger back sealing the blower up on the manifold and helping the distribution of the discharge from the supercharger to be more centrally located in the manifold.

Set back plate has been O-ringed on the blower side and includes a set of flathead bolts to mount to the manifold and O-ring. The plate has been anodized to help prevent galling and the plate has been machined to lighten it up to keep the weight down on your hot rod.'

£150.


Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 4/19/2022 9:15:30 AM Ref: 00098460
Mallory mag caps


Have 7 of these. They are the 'big' caps.

Same as these - https://www.alkydigger.net/proddetail.php?prod=AD-29774

Have loads of misc ignition leads too.

£100 takes the lot.


Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 4/19/2022 9:07:04 AM Ref: 00098459
10/71 Littlefield blower - needs repair


Very useable. Selling seperate as we found a hairline crack in blower case, weldable or use as a dummy blower.

£750. (case, rotors, front & rear covers).


Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 4/19/2022 9:05:00 AM Ref: 00098458
Callies Magnum 4340 Big Block Chevy crank


Callies Magnum 4340. 4.250” stroke. Used for 2 seasons then we spun bearing. Had a grind 10 thou. Still very useable.

£500



Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 4/19/2022 9:03:54 AM Ref: 00098457
MOROSO drag race oil pan for Big Block Chevy


This is $807.90 new.

Oil Pan, Aluminum, Natural, 6 qt., Stroker Clearanced, Chevy, Big Block.

NPT fitting attachment. Accepts 4.75 in. stroke with aluminum rods. Fits 4 bolt main caps including front and rear.

£500.



Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 4/19/2022 9:02:44 AM Ref: 00098456
MOROSO Big Block Chevy [Part number 68345] valve covers


MOROSO Big Block Chevy [Part number 68345] valve covers

£250.


Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 4/19/2022 9:01:31 AM Ref: 00098455
PSI low profile magnesium injector


Very good condition.

Buyer pays shipping.

£1200ono


Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 4/19/2022 9:00:23 AM Ref: 00098454
'48 Topolino altered body


Was used on Venom.

We have chopped as we didn’t want full body. So sold as body (cut at bulkhead) and then front nose piece.

Offers invited.



Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 3/31/2022 1:44:49 PM Ref: 00098453
Drag parts
Chromoly fabricated 9” axle with strange 50 spline shafts & Strange low-level brake kit for double bead lock wheels £3600
Strange aluminium front uprights with all hardware £1500
Strange steering rack (short)
15x12 Weld Alumastars with new Hoosier slicks 29.9 tall £900
Full chrome moly twin rail space frame for a stretched & widened mini van in black epoxy primer £3600
Full fibreglass mini van body shell for above frame with doors & front end £2500
Racetech seat & fitting brackets £1000
Everything is brand new, never been assembled.
Please feel free to email or call/message for info & pics
Contact: Sean
Country: United Kingdom
Email: click here
Tel: 07885 569283   


Date: 3/26/2022 4:49:23 PM Ref: 00098452
Ford Barra 4.0 Engine
Iconic Australian Ford Barra 4.0 Engine for sale in the UK

Rare to find one of these engines in the UK although they are getting more popular across Europe in the Drifting/Drag Scene, a Company in Sweden has started manufacturing aftermarket parts for these and are making very high HP figures.

If you do some research you'll see these engines can produce around 500hp on stock internals with just Stiffer valve Springs, then there are aftermarket parts available to make up to the 2000HP figure

Have a quick search on YouTube to find out how special these engines are! Many great videos from Channels such as FullBoost, Street Machine, 1320Video, Adam LZ', Haltech

So many uses and different applications these engines would suit, Great for a Drift Car / Drag Car / Conversion / Even ideal for a classic American Pick UPs etc

Comes with loom, upper and lower, Inlet manifold with injectors, Throttle Body, Alternator, Starter motor, Engine mounts, Subframe, Prop etc Only reason the engine comes with all this stuff is down to the previous owner importing a complete running falcon XR6 to the UK to break it for the complete engine package! So it's very rare to find everything together like this

If you do a google search on Engine Mount and transmission adaptor kits, you will see they are readily available to purchase online for various BMWs, Volvos, Mustangs etc

Sold as shown upon collection, Obviously, I would recommend a strip down and check over before use. I purchased this as a spare for Territory and I was going to use this for a donor for a 1000hp + build (using the turbo I have listed seperate) but now selling the car so no longer needed.

Price ----- £2000 Location ----- Derbyshire UK
Contact: Harry
Country: United Kingdom
Email: click here
Tel: 07929 417980   


Date: 3/16/2022 4:57:14 PM Ref: 00098451
Buick 455 big block engine and TH400 trans
Buick 455 big block engine, fully running as removed. With starter, dizzy, carb, exhaust manifolds.
Just removed it last week and a video of it running can be supplied.
Known to be in good condition.
Asking £1900.

TH400 trans with manual shift pattern and lockout. Came from the same car as the engine above. Fully working and with a 3000 rpm torque converter.
Asking £900

Aylesbury area.
Contact: Carl
Country: United Kingdom
Email: click here
Tel: 07921 588420   


Date: 3/7/2022 4:56:18 AM Ref: 00098450
Strange Double Adjustable 72984 Rear Shocks
Strange Double Adjustable 72984 Rear Shocks 7inch stroke. Really nice condition £400.

Mark - 07836 715613 - Greater London Area
Contact: Mark
Country: United Kingdom
Email: click here
Tel: 07836 715613   


Date: 2/21/2022 4:35:13 AM Ref: 00098449
Hoosier slick for sale
Brand new 29/10/15 D-6 compound slick. Unfortunately, when mounted to my drag bike and inflated, it ended up way bigger than the Goodyear it replaced and will not fit. Because it had been fitted, I can’t return it to the supplier. My loss could be your gain. Cost me £288 inc vat and delivery. Will accept £250 ovno to your door.
Contact: Rob
Country: United Kingdom
Email: click here
Tel: 07890 095193   


Date: 2/16/2022 3:02:55 PM Ref: 00098448
BAE Fat heads
BAE stage 3 fat heads, dual plug (one blanked off). 145cc volume. Old but in pretty good condition, Come with valves and springs, all rocker gear, no covers some spares. Looking for around £3000 ONO
Contact: Peter
Country: United Kingdom
Email: click here
Tel:   


Date: 2/13/2022 6:47:23 AM Ref: 00098447
Race transmissions
New Coan TH350 with transbrake (USD1900) Euro 1450-
New Coan TH400 with transbrake (USD 2500) Euro 1750,-
New Coan Converter 3500 stall SB NOS (USD 1150) Euro 950,-
All together Euro 3450,-
Can ship from Holland
Robert Koper
Contact: Robert
Country: Netherlands
Email: click here
Tel:   


Date: 2/11/2022 6:29:29 AM Ref: 00098446
Chevy TH 350 gearbox with shift kit
Chevy TH 350 gearbox with shift kit for sale.
Good working order
£500
Hurst quarter stick shifter with cable.
£150
Contact: Chris
Country: United Kingdom
Email: click here
Tel: 07967 673694   


Date: 1/27/2022 11:31:01 AM Ref: 00098445
BDG ENGINE FOR SALE
BDG ENGINE FOR SALE on a Lucas fuel injection

Cams are F1 inlet BD4 exhaust
1.360 inlet valves
1.180 exhaust valves
90mm bore
Cosworth pistons, rods and crank
The Engine has done very little track time about 12 laps.
Asking 10,000
Contact: Lancey
Country: United Kingdom
Email: click here
Tel:   


Date: 1/26/2022 5:35:41 AM Ref: 00098443
Lots of used and new parts sale / shop clean up!
Used RCD Offset Front Mag Drive with new spare 544-8M-12GT RCD Offset Mag Drive Belt and new RCD Mag Drive Hytrel Spyder Coupler Three Jaw $850

New US Gear Ring and Pinion # 07-910543. 35 spline, Ford 10" PRO Dual Bolt Pattern | 5.43 Ratio, MADE IN THE USA! $750

New Flatout Gasket Chevrolet bbc header gasket pn:7094C $40

Used Lenco CS1n 24 tooth 2” sun gear for a 1.17% gear set $50

New Lenco shifter bracket, give me a offer $??

Used rear Lenco intermediate shaft 1pc for 1.25% and are missing the bushing, 2pc for 1.31% and up one are missing the bushing $100 each

New Pro-werks C72-090 150lbs CO2 Short Nipple Regulator $65

New Bruno Drive 1” drum, got a magnet for input speed in it $150

Used red MSD pro mag 44 coil with rubbers have 16 passes since Electrimotion checked it in February 19 $350

Used red MSD 44 pro mag coil without rubbers have 0 passes since Electrimotion checked it in February 19 $350

Used MSD Wiring Harness for Points Box 44 Amp $30

New Air Retard RCD Three Jaw Driver $50

Used MSD/Dunn Steel Mag Driver Cross #8107 $40

New Fuel Pump Clamp Quick Release Stainless Steel $35

Used black HD RCD Billet Mag Clamp $80

Used black light RCD Billet Mag Clamp $80

Used RCD Billet aluminum Mag Clamp $70

Used Stainless Steel Magneto Band Clamp $30

Used upper Mag Support clamp $40

New Manton Spark Plug Tube, Top Alcohol Head, Large Hole; OAL 8.250” $60 for all 4

New MSD Pro Mag Rotor #7920 5pc $20 each

Used MSD Pro Mag Rotor with new tip #7920 $10

New black MSD Pro Mag Cap Thumb Screw Small #8408 $35

New MSD Pro Mag red Cap & Rotor Kit #8119 $45

Used MSD Pro Mag Cap Adpt. #8120 3pc $40 each

Used MSD small pro mag cap base and small cap bottom with screws $80

Used MSD Pro Mag Spark Plug Wire/Cap Retainer #8121 and used black cap in ok condition 2pc $40 each

New Msd wire retainer give me a offer $??

Used home made MSD small Pro Mag Setup Tool $25

Used red MSD pro mag 44 points box with rev limiter have 16 passes since Electrimotion serviced it in February 19 $450

Used Msd Top Fuel tester pn:8993 little used in good condition $250

New MSD Pro Mag Noise Filter #8830 $40

Little used MSD Pro Mag Noise Filter #8830 $20

New MSD Pro Mag Rotor Large Terminal Kit #7411 $40

New MSD Pro Mag Timing Tape #8126 2pc $10 each

New MSD Wiring Harness, Pro-Billet, Crank Trigger Distributor to MSD -6 Box, 72 in. Long 2pc $12 each

New Magneto Kill Switch MSD SPST #8111 $50

Used MSD Synchronization Pickup Kit #7555 with spare optic cable included 2pc $70 each

New RCD Mag Drive Hytrel Spyder Coupler Three Jaw $20

New Electrimotion extension cable 6ft long $60

Used 5 Series Manton pushrods 1/2 x .188 wall 5/16 – 5/16 ball with oiling 9.650” 2pc 8.832” 5pc 8.748” 1pc $100 for all 8.

Used 9pc and new 7pc 5 Series Manton pushrods 1/2 to 7/16 x .188 Wall 9.390” OAL Standard Cup Style Tip 3/8 CUP Upgrade to H-13 Tool Steel 3/8 BALL with oiling $240 for all 16.

Used 8pc and new 11pc 5 Series Manton pushrods 1/2 to 7/16 x .188 Wall 8.580” OAL Standard Cup Style Tip 3/8 CUP Upgrade to H-13 Tool Steel 3/8 BALL with oiling $285 for all 19.

Or give me an offer on the parts.

Got pictures of everything, just ask and I will send to you!

Parts located in Sweden, buyer pays for shipping!!!
Contact: Andreas
Country: Sweden
Email: click here
Tel: +46 70 419 54 54   


Date: 1/24/2022 4:16:33 AM Ref: 00098442
Ford 5.0/302 parts for sale
Early 90's F1SE code 5.0 EFI 302 Ford block freshly bored 030 to suit pistons, block chemically cleaned and all threads chased. 2MAE crank freshly ground .010"/.010". DSS forged pistons (DMS-8720-4030) £1000 as a bundle

5.0 Ford GT40 3-bar heads with uprated Alex Springs uprated valve spring kit VSK7h48-M2 including hardened shims and viton seals (brand new unopened), which matches the TFS1 cam lift as also for sale below. Heads complete but stripped. £600 heads and spring kit or £750 including the cam

Eagle forged connecting rods with ARP studs (brand new) (SIR5090FP) £300

Summit HEI billet distributor SUM8500-75 (brand new) £250

Trick Flow Stage 1 cam (brand new) £200

M-6500-R302 hydraulic lifters (brand new) £100

Fabricated rocker covers (clean but used) £50

Chrome sump (clean but used) with appropriate oil pick up £65 with Ford Performance Parts M-6710-A50 Oil Pan Gasket (brand new) £100

Clevite 77 main bearings (fitted for mock up only) £50

AED 600-970 Holley carb master rebuild kit (brand new) £50

Holley 4160 rebuild kit 37-1542 (brand new) £50

1986-1993 Ford 5.0 front timing cover, clean but used, good condition £50

Clevite 77 MS590P-20 mains and CP634P-20 big ends at -.020" (brand new) £35 per set or £60 for both

Comp 3230 Hi Energy timing chain kit (for post-1973 302 Fords only) (brand new) £50

Can post the smaller bits, or collection from near Crewkerne in Somerset.
Contact: Kit
Country: United Kingdom
Email: click here
Tel: 07972697065   


Date: 1/13/2022 6:44:30 AM Ref: 00098441
Small block Chevy parts for sale
400ci block with a 040” over bore and clearances for a stroker crank. Fitted with ARP mains studs and also includes an ARP head stud set. Fitted with a Howards cam that has new shells (pt no. 110345-10). £900

3.875” stroker crank for a 400ci sbc. £350

Crank damper. £30

Alloy cylinder heads, very short run time so really clean. £500/pair.

Tunnel ram inlet manifold with twin 450cfm brand new Holley carbs and linkage. £700

Twin four barrel scoop with air filters, brand new. £125

M/T rocker covers, really clean. £80

10mm Rocker cover spacers. £40

Set of +040” pistons and rods, very second hand but usable. £100.

MSD Pro Power coil, used. £30

Pair of red anodised rocker girdles. £40

Pictures available for all parts.
Contact: Ian
Country: United Kingdom
Email: click here
Tel: 07946 216568   


Date: 12/28/2021 2:48:14 PM Ref: 00098440
Wheels and slicks for sale
Centerline Convo Pro rears 15x14 3.5” backspace Mopar/Ford/Chevy unilug

With Hoosier slicks, 32x14.5 in great condition loads of tread £850 ono
Contact: Mark
Country: United Kingdom
Email: click here
Tel: 07587 773590   


Date: 12/20/2021 9:40:24 AM Ref: 00098439
Junior dragster full kit for sale
Full race kit Inc wrist restraints & neck brace, helmet size small, scuffs on the helmet from her getting out of the car, never been in accident!. Worn 3 times my 9-year-old daughter who was 4ft 11 at the time. Suits size kids medium. The boots are size 4. £100 the lot. Collection from pe28. Or Wellingborough would post at buyers cost
Contact: Matt
Country: United Kingdom
Email: click here
Tel: 07980211869   


Date: 12/6/2021 2:08:40 PM Ref: 00098437
M&H Racemaster front runners skinnies
Pair of almost new tyres
Like new
3.5 x 22 x 15
Maybe only ever 8 passes on very lightweight car.
£300 plus UK postage
Contact: David
Country: United Kingdom
Email: click here
Tel: 07968 137971   


Date: 11/7/2021 2:41:57 PM Ref: 00098436
Hammer / Kobelco 14/71 Hi-Helix with Delta Base
Owned by me from new, all modifications by Troy Critchley at Hammer Superchargers.

CGC Carbon 3 blade Injection Hat

DMPE modular spacer plate and retention plate with straps all in date. These are brand new and flow really well with everything

Blower can be sold separately to everything but needs to go first.

Serious enquiries only please, Data available from Hammer. Shipping anywhere not a problem
Contact: Wayne
Country: United Kingdom
Email: click here
Tel: 07969 298479   


Date: 10/16/2021 4:25:16 AM Ref: 00098434
Ford-Cosworth BDG 2.0 Litre Race Engine
Up for sale is my Ford-Cosworth BDG 2.0 Litre Race Engine, which comes with the following new components:

New cylinder head
New valvetrain components
New cam carrier
New pistons
New con rods
New crankshaft
New bearings/gaskets

The engine is on the original Cosworth block, sump pan and injection system.

The engine is on 8mm Lucas injection metering unit and high-pressure fuel pump were also recently overhauled.

This is a fresh build that has only been run-in on the dyno and makes a good, strong, 295bhp. There are 2 exhaust manifolds included to the sales (one for front engine and one for mid-engine).
Asking $14000
Contact: mike
Country: United Kingdom
Email: click here
Tel:   


Date: 10/12/2021 11:33:27 AM Ref: 00098433
Type the heading for your ad here
TCI super street fighter 10" converter, like new, less than 100 miles use, still looks like it came fresh out of the box, perfect working order, to fit GM TH350 or TH400.
£250
GM TH350 (bop pattern) transmission, bnm shift kit, chrome pan with drain plug, recent refresh with new filter and gasket, new tailshaft seal, good working trans, no issues.
£500
Collection only from Wakefield area, West Yorkshire.
Contact: Steve
Country: United Kingdom
Email:
Tel: 07852 943281   


Date: 10/12/2021 11:30:04 AM Ref: 00098432
Holley Dominator 1050cfm 3 circuit carb
I bought this carb new back in 2008,since then all it has done is between 30-40 runs. Very good condition, I have studded the one float bowl as the usual thing when fitting a slightly thicker gasket the threads can get stripped.
£400 or best offer, but nothing daft.
Contact: Mark
Country: United Kingdom
Email: click here
Tel: 07802 226453   


Date: 9/30/2021 10:46:30 AM Ref: 00098431
Ford Mark VIII (8) Intech 32 valve v8 engine
Ford Mark VIII (8) Intech 32 valve v8 engine for sale complete with gearbox.
£2500.
Contact: Ian
Country: United Kingdom
Email: click here
Tel: 01959 577265   


Date: 9/30/2021 8:53:13 AM Ref: 00098430
Junior Dragster Engine
Craw’s Racing ZR3 3x3 8.90 / 7.90 Lite package Jr Dragster Motor. (LESS EXHAUST)

ZR Billet Block, Billet Flywheel, 563 Stroker Crank, Billet Starter Nut, Light Weight 3” Piston, 33mm Mikuni Carb, Multi Angle Valve Job, Billet Cylinder Head, Billet Breather, Billet Coil Bracket, 3HP Coil (NEW 8 passes ago), Steel Sleeve, Bronze Guides, 5/16 Billet Lifters, NGK Plug (new 8 Passes ago), Billet O Ring Side Cover, Billet Connecting Rod, Adjustable Billet Cam, Big Valves, Competition Porting, Mikuni Fuel Pump (NEW 8 passes ago), Oil Drain Valve, Craw’s Billet Oil Evac.Breather with breather & Fuel Pump bracket.

Oil changed every 3-5 passes, and motor fogged down after every race weekend always been well kept.
Motor currently run best of 8.33@78mph with a 14yr old.

£2,700
Contact: Nick
Country: United Kingdom
Email: click here
Tel:   


Date: 9/14/2021 5:02:17 AM Ref: 00098429
Injectors and third member for sale
1 set of new 8 Billet Atomizer 700 injectors. Fresh from Atomizer in the case. £2300

1 set of new 8 Siemens 220 injectors. Flow matched set. Will work at 105psi base for much more flow. £950

1 x Strange 9 inch ultra case pro mod 3rd member. 40 spline spool, 9.5 inch cryo and polished ring and pinion 3.70 to 1 ratio, speed sensor and magnetic ring installed, 1480 billet yoke and set up for pumped pinion oiling. £2000

Call Andy Frost on 01902 344004 or 07970 573872
Contact: Andy
Country: United Kingdom
Email: click here
Tel: 07970 573872   


Date: 9/4/2021 5:26:36 AM Ref: 00098428
Ex Pro Stock engine
Ex Pro Stock engine from Bob Ingels 4 sale. Best ET in PS 6.89. Dyno sheets from 2020, BTE bolt together converter, with 2 exstra stators. Div spare parts. PB on +45 40722500. Only serios inquiries, no tire kickers please.
Contact: Per
Country: Denmark
Email: click here
Tel: +45 40722500   


Date: 8/14/2021 3:03:37 PM Ref: 00098426
Parts for sale
Ford 429/460 engine block Water plug Kit P/N 830012, new, still in packet £5.00 +P&P
Ford 429/460 Clevite 77 Bearings CB-818 P-20 (8 pairs of rod shells) new, boxed unused £35.00 +P&P
Ford 429/460 Clevite 77 Bearings MS-1039 P-20 (Full set main bearings) new, boxed unused £30.00 +P&P
Ford 429/460 Clevite 77 Bearings SH-1111S (Full set cam bearings) new, boxed unused £20.00 +P&P
Mallory Tachometer P/N TC 0807, black face, white letters, orange needle, 4.5" dia., mounting bracket
£40.00 +P&P
Autometer Fuel Gauge P/N 3411, used, great condition, 0-15psi, 2 5/8” diameter, black face, silver housing, black mounting bracket/pod £25.00 +P&P
B.B Chevy zoomie headers by Dan Olson Racing Products, 17” centre line length, reasonable condition chrome, all welds clean and solid, pipes have no cracks or breaks £50+P&P
Open to sensible offers. Combined postage on multiple purchases.
Keith, Chester. Tel: 01244 321624 evenings.
Contact: Keith
Country: United Kingdom
Email: click here
Tel: 01244 321624 evenings   


Date: 8/14/2021 3:02:06 PM Ref: 00098425
Engine for sale
B.B. Ford 460 (+ 0.030” overbore) street /strip motor
Best parts used throughout. Spare parts and engine stand included in the price including flexplate, new gaskets, carb spacer, second fuel regulator, fan, rubber hose etc.
Built for a project but never used. Motor built to Ford specs./torque settings with numerous new parts. Has not been run. Valve covers and carb. are removable for inspection.
New Fel-Pro gaskets throughout. New Clevite 77 shells used throughout.

Cast iron block, stamped D1VE (1968-70) Cleaned prepped, overbored 0.030” – shells P+30, M+20, R+20. All new Rollmaster double row timing chain, new Fluidamper balancer, new pistons, new rings, new rod bolts, new shells etc. Sump is a baffled Milodon item with matching oil pump and pickup with extension to rear of sump.

Cast iron heads, stamped D3VE-AA (1972-74). Combustion chambers have had all casting marks removed, polished and evened for size. Intake and exhaust ports matched to gaskets and mildly ported. ARP 12 point head bolts, Milodon roller rockers. Valves new. Hydraulic cam (0.570/0.570), lifters and pushrods all new. Valvetrain has liberal coating of CV Grease (Molybdenum Sulphide) ready for successful startup. Headbolts, crank bolt etc. have copper anti-seize on them, pistons and rings are liberally oiled.

Engine has a serpentine belt system with Ford Motorsport Racing underdrive pulleys, high output 429CJ water pump, remote oil filter with take-off, AN10 Stratoflex braided lines and AN10 Stratoflex (aircraft quality) fittings.

Edelbrock intake Performer RPM, 2” spacer, handmade 6082 transition plate and a rebuilt, cleaned and refurbished Holley 850cfm carb, braided lines and Holley fuel regulator. Air cleaner and rocker covers are gold Moroso items.

Extensive parts list, photographs of engine and photographs of rebuild at each stage available by emailing: [email protected]
Open to sensible offers as I need the space for existing drag car.
£3750 O.B.O. Keith, Chester. Tel: 01244 321624 evenings. Buyer collects.
I have additional parts for sale – see my other advert in Parts for Sale.
Contact: Keith
Country: United Kingdom
Email: click here
Tel: 01244 321624 evenings   


Date: 7/20/2021 3:38:49 PM Ref: 00098422
The Villain Engine for sale
For sale: one engine. 8 full passes on new 4.5 bore standard deck height Dart Big M cast iron block.
New 4.25 stroke Callies Magnum crank, 2 key ways and internally balanced. RCD crank hub.
New Carrillo Pro-A Beam rods. New JE Blower pistons with heavy duty gudgeon pins. JE rings.
Milodon sump with windage tray, oil heater and sight glass. New Doug Herbert roller cam and new Doug Herbert roller lifters. Double pinned cam to timing gear.
2 3/8 stainless headers. New Brodix BB-2 xtra ali cylinder heads. M/T valve covers.
New Comp Cams Pro Magnum roller rockers. New Comp Cams stud girdles.
Weiand blower manifold. Mooneyham 14-71 standard helix blower, large opening top and bottom. Re-striped Teflon and Nylatron and new bearings all done by Kenny Gomez.
New blower idler pulley bracket. Heavy duty snout and coupler.
Enderle upright injector and scoop with k barrel valve. Enderle 110 fuel pump. Enderle timing cover. the Enderle parts I bought new 6years ago.
Black braided fuel lines.
Mallory Super Mag 5 with transformer, I bought new 6 years ago. solid wire plug leads. Comes with offset blower starter, new 48v starter pack. new 48v charger.
Spare plugs, oil, gaskets and some tools.
Put this in your chassis, reset valve lash, add fuel. 1400 hp. We cross the finish at 7000 rpm. Best mph. 203. best et. 7.01.
I'm asking £25,000. any questions, call me on 07876 504864. or e.d.a. on 01977516622.
Contact: Chris
Country: United Kingdom
Email: click here
Tel: 07876 504864   


Date: 7/10/2021 1:27:09 PM Ref: 00098421
ATI Super Damper
ATI Super Damper
Good Condition
Came off Chrysler Hemi

£100 plus p&p
Contact: Andy
Country: United Kingdom
Email: click here
Tel: 07860 405060   


Date: 7/10/2021 1:25:50 PM Ref: 00098420
Transmission Blanket
Transmission Blanket - Lencodrive - 2 Speed
Brand New
£200
Contact: Andy
Country: United Kingdom
Email: click here
Tel: 07860 405060   


Date: 6/21/2021 7:07:02 AM Ref: 00098418
Wheels for sale
Street Pro Convo Polish 4x15 front wheel
When you order this wheel you get a wheel with Double bolt pattern
5x114.3 + 5x120.65
Price each : D.kr 1799, SEK/NOK 2431, EURO 241
Order from www.daekimporten.dk. The wheels are in stock.
Contact: Martin
Country: Denmark
Email: click here
Tel: +45 75626388   


Date: 6/10/2021 10:20:25 AM Ref: 00098417
Wheels & Tyres For Sale
Pair of Hoosier slicks 32”x14.5”x15. Over half tread left. £200
Pair of Hoosier Front runners 24”x5”x15 Loads of tread. £200
Pair of Centreline Auto Drags 15”x15”. 5 x 4 ¼ PCD with 5” back space. One needs minor rim repair. Will clean up nice. £180
Contact: Rob
Country: United Kingdom
Email: click here
Tel: 07729 374425   


Date: 6/9/2021 3:57:35 AM Ref: 00098416
stilleto steering rack gaiters
rack gaiters for stilleto dragster rack 1 inch inside diameter
£40
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 6/8/2021 5:47:32 AM Ref: 00098415
56 1/2 " Speedway gasser front end
For sale a Speedway 56 1/2” hub face to hub face front end - complete, steering box, springs, shocks, calipers hubs solid axle, was tack welded to a Willys coupe that I have just purchased and removed as I don’t like the look, has a couple of bits of surface rust on the axle discs one caliper etc - will rub off no problem. It's really as new most parts are still in the packet.
£1500 ono delivered to your door - mainland UK, I can post anywhere else at extra cost, pics on request.
Will do a deal on a 383 tunnel ram, 440 parts/tunnel ram, etc or any Ford 460 parts.

Contact: John
Country: United Kingdom
Email: click here
Tel: 07883 217537   


Date: 6/3/2021 3:30:22 AM Ref: 00098414
BBC Melling billet oil pump
BBC Melling billet oil pump 10070-800ss
brand new, cost me £547.20 (I have receipt) 2 months ago, suits 8-inch depth sump, mine is 9-inch sump DOH!
£400 - Buyer pays shipping, please.
Contact: Ron
Country: United Kingdom
Email: click here
Tel: 07564 649567   


Date: 6/2/2021 4:47:21 PM Ref: 00098413
1050 dominator
1050 dominator, 2 circuit, adapted to external linkage, built for 472 Pontiac that made 620hp on the dyno. too big for me on the road but more than enough at the track. approx 5 years old but not much use in that time. can email pics if needed. £500
Contact: Rick
Country: United Kingdom
Email: click here
Tel: 07944 205239   


Date: 6/2/2021 4:45:34 PM Ref: 00098412
Wheels and axle
2 Weld Prostar wheels 8” x 15” with 5½” back space. 5 x 4½” Ford PCD
Weld racing centres.
Old but good.
Fitted with 225/60 Continental tyres (like new). 10 lug nuts included
£200

I also have a type F Toyota Celica axle with a TRD (Toyota Race Developments) LSD fitted.
Complete with discs and callipers. All good.
This is the strong one. It was fitted to a 1979 Celica.
£1000
Contact: Richard
Country: United Kingdom
Email:
Tel: 07446 322375   


Date: 5/31/2021 4:30:03 AM Ref: 00098411
Recaro racing seat
Recaro Pole Position racing seat black, new unused.
Lovely comfortable seat for the taller larger driver £450.
Collection North East London or can take to Santa Pod.
Contact: Dave
Country: United Kingdom
Email: click here
Tel: 07956 961114   


Date: 5/15/2021 12:04:32 PM Ref: 00098410
Storage rack for sale
Double sided on wheels.
Price:£10
Located in Rushden UK, not far from Santa Pod.
Call 01933 313816 Contact: Dave

Contact: Dave
Country: United Kingdom
Email: click here
Tel: 01933 313816   


Date: 5/13/2021 1:40:13 PM Ref: 00098408
Moran Chevy Smallblock
440cu in, Twin 88 Garrett ballbearing all option, Billet block, Billet Alan Johnson heads, Bryant crank, Diamond pistons, Jesel Tie-Bar lifters, Moran billet intake, MSD Pro Mag 44, Waterman pump, Verdi 6-step dry sump, selling complete engine with computer, tune up, new rods, bearing rings, every thing is fresh.
Last event 6.0 /246mph in a 1180kg car with tyre shake. Smallblock European record at 402m, engine makes 3000hp.
Selling everything, going out of racing...
Price 400.000:- SEK

Contact: Peter
Country: Sweden
Email: click here
Tel: +46703615472   


Date: 5/1/2021 9:44:04 AM Ref: 00098407
Pair of slot mags
Pair of 7 X 15 slot mags, five stud unilugged, no makers stamp but have a SEMA sticker, in good condition but could do with a polish. £350.
Contact: Jonathan
Country: United Kingdom
Email: click here
Tel: 07929 923791   


Date: 4/28/2021 2:57:38 PM Ref: 00098406
OMP First S Race Suit
The OMP First S race suit is an excellent entry level 2 layer Nomex suit offering superb value for money. This is a re-designed version which complies with the latest FIA approval for increased heat and flame protection. Advanced construction techniques have reduced the suit weight by 9% over the previous version. The suit includes many features usually only found on more expensive options such as fully floating sleeves to allow for maximum articulation whilst driving, flat driver extraction shoulder points to eliminate pressure points when used with an FHR device.
* FIA 8856-2018 approved
* 2 Layer (400 g/m² material weight).
* Improved heat and flame protection with no compromise to comfort
* Stretch panel in the lower back improved comfort and mobility when seated
* Ultra flat seams reduce pressure points for increased comfort
Cost £354, for sale at only £280
Contact: Ian
Country: United Kingdom
Email: click here
Tel:   


Date: 4/8/2021 5:52:09 AM Ref: 00098402
Weld Draglites
Pair 4.5x15 Weld Draglites with good 165/55R15 tires multi stud pattern, were fitted on 4 stud Ford. £150
Contact: Bob
Country: United Kingdom
Email: click here
Tel: 07877 896783   


Date: 4/3/2021 7:08:10 AM Ref: 00098401
56 Desoto Hemi parts
Original gearbox, think it's a Torqueflite,including torque converter and bellhousing £80, generator /steering pump £30. Starter motor £30. 2 barrel carb £15, 2 barrel inlet manifold £30, old Hemi block £30, other small engine ancillary parts, phone for details.

Contact: Bob
Country: United Kingdom
Email: click here
Tel: 07877 896783   


Date: 4/2/2021 5:16:06 AM Ref: 00098400
TH400 Gearbox Chevy pattern
Art car gearbox with full manual valve body reverse pattern short tail with 6 braided lines with dry break connections, 10” TCI converter ultimate blue plate with steel stator and anti ballooning plate with energy suspension mount.

Reduced for quick sale - £1,600 ono

Out of vehicle for inspection if required, pictures available
Contact: Steve
Country: United Kingdom
Email: click here
Tel: 07946 022984   


Date: 3/18/2021 8:15:50 AM Ref: 00098399
Whipple R980 Screw Blower
Overhauled in the States just before I bought it, and never used since.
Comes complete with Taylor bag/restraints/plate.
£8000.
Contact: Larry
Country: United Kingdom
Email: click here
Tel: 07838 232319   


Date: 2/27/2021 7:12:37 AM Ref: 00098395
Removable tow bars
Dodge ram heavy duty removable tow bar. £50.00

Race car tow bar that fits into the Dodge Ram tow hitch using a quick pin with R-clip for easy install/removal. Just requires your own tow strap to attach. £40.00 (made by Jon Webster)

Contact: Jan
Country: United Kingdom
Email: click here
Tel: 07900 693735   


Date: 2/22/2021 10:13:14 AM Ref: 00098394
Complete blower and fuel (methanol and gas) system for BBC
Littlefield 8-71 blower (as cast finish) re-striped with new bearings and seals, Enderle bug catcher. BBC inlet manifold with burst panel (not in tag) and belt tensioner, selection of pulleys.
Complete methanol fuel system including Enderle fuel pump, 6” pump extension, 3-way bypass valve, hoses and fuel filter, barrel valve and hardlines etc.
Complete gas set up (supplied by Alkydigger), fuel pump, twin bypass valves (including various springs) various nozzles and pills.
Complete with crank hub, pump spud, 3-way valve cable, leak down tester for setting the barrel valve, 2 blower belts and Speedway (Moon) 2 gallon fuel cell
Full blower restraint set-up including safety blanket (not in tag)
When I purchased this it was being used on a methanol funny car – I converted it to gas but never started the engine – going efi now.
This is everything you need except the timing cover. Price £3000GBP firm, not interested in splitting.
Contact: Robert
Country: United Kingdom
Email: click here
Tel: 07585 537487   


Date: 2/12/2021 9:59:50 AM Ref: 00098393
Mint 540 Big Block Chevy with 8-71 BDS supercharger
540 ci Big Block Chevy engine with an 8-71 BDS Supercharger 800+Hp. Condition is HARDLY USED, in absolutely mint condition, done hardly any miles.

540 Merlin 4 bolt main block, double keyed 4340 crank. Aftermarket balancer, 4340 H beam steel rods, 8.5 to 1 J&E forged pistons, file fit rings, 702/702 roller cam, roller lifters, double roller timing chain and gears, polished 115-CC aluminium heads, Manley 225-188 stainless steel valves, 10 degree chrome moly retainers and locks. Comp Cam springs, stud girdle, Comp Cam hardened push rods, Moroso oil pan and pickup tube. Block red SFI168 tooth internal balanced flex plate, ARP head bolts. Full polished intake stainless hardware, BDS 871 supercharger, 3” comp drive pulleys and belt, funny car style belt guard, 3 whole gauge panel and gauges with all lines plumbed to engine. Red plug wires, MSD distributed, staggered bolt starter, Holley 950 blower carbs, linkage.

Price of £8999 is negotiable as this engine must be sold within 3 weeks.
Contact: Dean
Country: United Kingdom
Email: click here
Tel:   


Date: 1/27/2021 5:56:21 AM Ref: 00098391
Five point harnesses
3 in number RJS Racing Equipment, p/n 540-19-43, 3 inch wide latch lever five point harnesses.
All out of SFI date but very useable items for R.W.Y.B. etc, no tear,s or damage.
£50.00 each or all three for £120.00
Due to weight delivery at £10.00 each or collection in person.
Contact: Spencer
Country: United Kingdom
Email: click here
Tel: 07479493472   


Date: 1/22/2021 3:46:17 PM Ref: 00098389
Big block Chrysler and 727 transmission
496 ci street/strip stroker Big Block Mopar
Built by Dave Pollen of ex Pro Mod fame
383 block of 1968 vintage
Bored and stroked to 496ci steel 4340 crank Eagle H-beam rods
Flat tappet cam with 3/8th push rod and Isky steel rockers big valve factory heads with stainless valves, new springs retainers etc true roller timing chain, pro street damper.
Oiling system is Milodon inc deep pan.
Team G inlet.

Transmision:
727 reverse pattern manual shift with transbrake built by Duncan Watts
Torque converter is a TCI 142200 StreetFighter 3500/3800 stall
Motor etc came out of a Pop I recently purchased, the motor trans etc have done a couple of 10.4 passes and less than 100 road miles. The internals are in mint condition, I had it running sounded real strong with great oil pressure etc
I've revamped the paint in Chevy orange for added reliability. Pan and inlet are loose for inspection purposes. Comes with all new gaskets.
This is a real nice motor and trans ready to load and go

MOTOR inc inlet £5400

TRANS ...£1500

CONVERTER £495

I'm not interested in stupid offers, the prices are quite firm, that said, I'll listen to a deal on a job lot.

I also have a as new Mallory electronic dissy and CSR billet water pump, both will be offered to whomever purchases the motor.
Contact: Matt
Country: United Kingdom
Email: click here
Tel: 07980211869   


Date: 1/8/2021 4:49:27 PM Ref: 00098386
Aluminium driveshafts for sale
MW 7075 4 " driveshafts for sale :

center to center U joint : 41.312 "

1 new never used with 1350 U joints 650 €

1 used perfect condition with 1350 U joints 450 €

If you buy both 1000 €
Contact: Norbert
Country: Germany
Email: click here
Tel:   


Date: 11/30/2020 3:59:46 AM Ref: 00098384
valve spring checker
wizard tools valve spring checker for brad Anderson fat heads,nre,aj muscle heads could probably be modified for fuel heads
£75
Contact: bert
Country: Uk
Email: click here
Tel: 07956343980   


Date: 11/16/2020 2:57:34 PM Ref: 00098383
msd powergrid modules
msd 3 stage timer module part no 7760 for powergrid £100
Contact: bert
Country: Uk
Email: click here
Tel: 07956343980   


Date: 11/10/2020 4:52:01 AM Ref: 00098382
289 v8 engines for sale
1965 289 V8 engines for sale one in running condition.
can be heard running inc distributor. Hedman headers.
water pump-new carb & inlet manifold +starter motor £3500
C5AE cast number - good compression and leakdown tests.
Contact: Brian
Country: United Kingdom
Email: click here
Tel: 07837985973   


Date: 11/1/2020 3:49:37 PM Ref: 00098381
Front struts for sale
Strange aluminium front strut package complete kit inc brake callipers brake discs and A arms all new never fitted. £1500
Contact: Terry
Country: United Kingdom
Email: click here
Tel: 07714244912   


Date: 10/25/2020 12:34:57 PM Ref: 00098380
Alky Funny Car parts for sale
Carbon Fibre Chevy Monte Carlo funny car body including all tin work for sale £4,250
Alky clutch complete £1,250
3 speed Lenco with reverser £3,250
Racepak computer complete £1,500
BAE 176cc heads built and ready to run £2,000 pair
3" mains Hemi cranks one splined one double keyway £1,500 the pair.
Please call or e-mail
Contact: Tony
Country: United Kingdom
Email: click here
Tel: 07384 257830   


Date: 10/25/2020 5:03:11 AM Ref: 00098379
Top methanol motor for sale
Top methanol motor for sale hat to pan, never damaged Frank Manzo spec 526 Hemi with BAE 8s. Complete with tune ups, flowed fuel system, PSI D supercharger, headers. Suit Top Methanol Dragster, Top Doorslammer, TA Funny Car or an Outlaw Anglia?? Has ran 5.50s in a FC @260mph at 92% overdrive in Europe. £40,000 or sensible offer.
Contact: Ben
Country: United Kingdom
Email: click here
Tel: 07399015412   


Date: 10/14/2020 3:54:57 PM Ref: 00098376
Wheels/tyes
Brand new Weld Pro stars 14 x 15 with 7” backspace
Fitted with new Hoosier 31 x 14 x 15 D05 Slicks
New Moroso rim screws
Cost over £1200 will accept £750
Contact: Dave
Country: United Kingdom
Email: click here
Tel: 07791 141170   


Date: 10/13/2020 9:01:58 AM Ref: 00098375
m&h tyres
nostalgia top fuel slicks 33 x 13.5 x 16 new £475.00 pair
dot pro street wrinkle wall 30 x 18 x 15 new £400.00 pair
drag radials 315/60r16 new £400.00 pair
dot cheat tyre 29 x 17 x 15 new £400.00 pair
front runners 24 x 5 x 15 new £300.00 pair
Contact: lee
Country: United Kingdom
Email: click here
Tel: 07771590176   


Date: 10/2/2020 5:31:29 AM Ref: 00098373
4th Gen Camaro Parts
Shell scrapped
Doors, tailgate, hood wings etc available
3.8 EFI V6 engine with 4l60e auto, on frame & X member
Pcm and wiring
Front suspension, brakes etc
Front lights, dash etc
Loads of other bits
All cheap

Collect from Manchester or can send on carrier at cost
Contact: Al
Country: United Kingdom
Email: click here
Tel: 07948376819   


Date: 9/24/2020 3:17:21 PM Ref: 00098372
1967-68 Fastback Mustang GRP body
1967-68 Fastback Mustang GRP body for sale. Made by US Body in Florida. Please see the link:

http://www.usbody.com/Pages_Cars/67-Mustang.htm

Includes: Fastback body, One piece front end, 2 Doors and Trunk lid. All new and never drilled, fitted or used. Cost £8,000 with shipping and duty.

£5,000 ovno. May be able to deliver depending on where you are. Please e mail.
Contact: Simon
Country: United Kingdom
Email: click here
Tel:   


Date: 9/23/2020 2:56:51 AM Ref: 00098371
Most parts for a twin turbo bbc setup
Pair of 88mm Holset turbos brand new.
Big stuff 3 EFI setup engine and car looms like new
Magnafuel 750 EFI pump unused
8x Bosch 180lbs injectors used but tested
BBC 9.8 deck intake with injector bosses
2200cc dominator throttle body
Steve Morris intake hat
Fuel rails
With the right long block, this is all more than capable of 1800-2000hp only limiting factor is injectors would have to go bigger for more.

Price as a package is £4500ono
Can send photos on request.
Txt or ring with interest 07943701868

Contact: Danny
Country: United Kingdom
Email: click here
Tel: 07943 701868   


Date: 9/16/2020 11:25:21 AM Ref: 00098370
Nitrous Oxide bottle for sale
Brand new Full size (J) Nitrous Oxide bottle. Unused.
Collection from Midlands area.
Contact: Len
Country: United Kingdom
Email: click here
Tel: 07883 303402   


Date: 9/8/2020 6:37:58 PM Ref: 00098369
Lenco 3 speed with reverse for sale
Lenco 3 speed with reverse, ratios are 44% & 28%, reverse has a neutral position.
Recently checked over £3,000 ono
Can bring to Hot Rod Drag, Joe Bond's pit - Supercharged Outlaws.
Contact: Martyn
Country: United Kingdom
Email: click here
Tel: 07702115548   


Date: 9/6/2020 6:44:00 AM Ref: 00098368
Thumper 1050cfm+ BLP Billet Dominator Carb
Straight from the Carb Guru himself, minimal use on his own car
Well set up for AFR for both Street/Race.
1>2 minor scratches on top of Carb, near new condition.
Comes with some fuel lines/fittings, was going on our combo not being used now.
Comes with some extra Superformance Bowl gaskets.
£999.

Magnafuel regulator with fittings..£70

New 2" HVH 4-Hole Super Sucker adapter from 4150>4500 with Superformance gasket
£130

Les 07913 658312 or 0208 292 1019
Enfield EN3
Contact: Les
Country: United Kingdom
Email: click here
Tel: 07913 658312 or 0208 292 1019   


Date: 9/4/2020 9:48:18 AM Ref: 00098367
Shorty’s hotrod 496ci big block chevy
496ci big block Chevy out of Shorty’s Hot Rod Outlaw Anglia. Built by Jeff Bull Race Engines. Has best times of 7.65 @174 and a very consistent high 7 second motor with very little maintenance. 10:1 compression so capable of running on pump gas.

Complete engine stripped for rebuild. Now bored out to 0.070 thou over and requires new srp pistons to suit.

4 bolt main tall deck truck block, bored 0.070 thou

Edelbrock rpm ali heads

Crower crank

Grp ali rods

Nitrous spec cam

Intake with carb and nitrous fogger included

£5000 ono

New engine being built to keep up with the improving times of Outlaw Anglia so this engine needs a new home.
Contact: Jedd
Country: United Kingdom
Email: click here
Tel: 07495743379   


Date: 9/1/2020 2:49:44 PM Ref: 00098366
She Devil parts for sale
Front wing double element and Rear wing with struts from the Altered. Make an offer.

CBD Injector Hat and barrel valve, fits PSI blower, from Altered/Funnycar. Make an offer.


Contact: Steph
Country: United Kingdom
Email: click here
Tel: 01892 661245   


Date: 8/25/2020 2:01:14 PM Ref: 00098365
Methanol injected SBC
Blown Methanol injected Small Block Chevy
383 Bowtie block machined for head gasket rings. Block semi filled
Howard crank with big block snout and two keys
J and E pistons
Scat H beam rods with arp 2000 bolts
Roller cam
Donovan cam cover inc mechanical fuel pump
Miloden race sump
Enderle mechanical fuel pump
BDS 6-71 Stage 4 blower
Enderle Big and Ugly Hat
AFR heads that have all new valves springs and retainers
Offset drive Mallory magneto with coil
Ally intake manifold with injectors fitted
Stainless steel zoomies
PTC Torque Converter specifically made for this motor.
Made 900 hp on Kenny Colemans dyno
Ran 7.9 @ 173mph in 750kg Altered
This motor has been stripped for inspection
£7000 as is or will split if enough interest
Ring Kev on 07818412357 anytime
Contact: Kevin
Country: United Kingdom
Email: click here
Tel: 07818412357   


Date: 8/19/2020 11:01:13 AM Ref: 00098363
MSD 44AMP MAG
MSD 44AMP MAG + coil and points box with rev limiter for sale. £1800.
Contact: Mick
Country: United Kingdom
Email: click here
Tel: 07850169812   


Date: 8/17/2020 9:35:50 AM Ref: 00098361
496CI BIG BLOCK CHEVY STREET OR STRIP


496CI Big Block Chevy, just built at Rough Diamond Racing.
Block has been fitted with brand new steel billet splayed 4 bolt maincaps.
Freshly bored block, brand new Wiseco pistons P/N 152160 which benefit from lowered ringlands so can be used naturally aspirated or Can be safely used with Nitrous, Turbos, Supercharger, Procharger, etc. Compression Ratio 10.06-1
New Total Seal Piston Rings.
Brand New Aluminium Cylinder Heads, Dart Pro 1 copy
New Comp Cams Hydraulic Roller Camshaft P/N 11-414-8
New Hydraulic Roller Lifters
New ARP bolts used thruout
Eagle Crankshaft 4.250 Stroke on standard/standard
New Eagle H-Beam Rods
New Hamburger Oil Pan
New Holley Ultra XP 4150 1050cfm Carb P/N 80805
New Rocker Covers
New Timing Chain Assembly
Clevite Bearings
Rotating assembly balanced at EDA
New MSD Pro Billet Distributor P/N 8555

Price reduced to sell, You cannot buy the parts in this motor for the money I am asking, let alone have it built and ready to go.

£7995.00

Any questions or for more details, please call or message
Contact: Paul Marston
Country: United Kingdom
Email: click here
Tel: 07831650230   


Date: 8/4/2020 2:38:31 PM Ref: 00098360
Hoosier slicks
2 x Hoosier 18210 radial slicks 30 x 9.0 -15. These are brand new purchased in June 2020 not been run, have the stickers on. Trial fitted and I think they are too tall for my application, selling below cost £ 575 contact Tim
Contact: Tim
Country: United Kingdom
Email: click here
Tel: 07836 592129   


Date: 7/8/2020 2:16:18 PM Ref: 00098359
CS1 Driveline
LENCO CS1 + 10" Crower Clutch + Trick Tit Bell £4,000 - £2k going towards Melbourne rebuild. Hemi Trick Titanium Clutch can with pedal clutch, fork & bearing etc. + Crower 10" Hemi Alcohol 6 stand 3 plate clutch (Titanium donut). + 3 speed & reverser fine spline, large sprag CS1 in perfect shape, 1.41 (41%) & 1.48 (48%) (2.09 - 1st). + Straight coupler + drive shaft + Blankets + Shift pods & shift buttons includes steering wheel mounting + a few new & some refaced floaters & clutch discs. + Spare complete 25% gear set. + Lenco spare clutch's / floaters & new large sprag. (lots of bits). Everything you need to go between the end of the crank to the rear end. All in current tag & in as new/great shape. (I won’t split)

Trev needs a top-up to get Melbourne rebuilt, 'Let’s get this job done'
Contact: Mark
Country: United Kingdom
Email: click here
Tel: 07785 226782   


Date: 6/25/2020 8:02:13 AM Ref: 00098357
Brand new Precision turbo Pro Mod 91 gen 2
Brand new in the box Precision Pro Mod 91mm gen 2 turbo
Also includes new v bands for hot and cold side as we as billet drain with mesh, all genuine Precision.
Huge saving on list
£3250
Serious bargain
Contact: Jay
Country: United Kingdom
Email: click here
Tel:   


Date: 6/19/2020 12:38:27 PM Ref: 00098355
AJPE 481X stg4 4000+hp engine - $45k
This is AJPE STG4 engine build by Nelson. had it on my promod turbo for abput 50 runs. ran 7s and 10 runs 6s (we have time limits). just installed new rods, springs, bearings, rings. everything is perfect, block never had any damage. comes with intake manifold and dual rails setup. system1 wet sump pump included also.

if needed will sell 2 sets of exh manifold for turbo setup, dump tubes and exhaust tubes for it also.

can include waterman fuel pump used on it, 28gpm for 1000 usd if buying along with the engine.

Have photos, can email
Contact: Andrey
Country: Ukraine
Email: click here
Tel:   


Date: 6/18/2020 2:24:40 PM Ref: 00098354
LENCO CS2
LENCO CS2 front box small repair done
Ring gear 88 Tooth + planetary set 32T = 1.28 Ratio

Offers
Contact: Dave
Country: United Kingdom
Email: click here
Tel:   


Date: 6/12/2020 5:56:16 AM Ref: 00098353
Set of 15” Billet Specialities Street Lite Wheels - 5x5 Bolt Pattern
2x 15x7 w/4.5” Backspace
2x 15x10 w/6” Backspace

Very light use, pretty much like new. Pics available on request

These were $1500+ new

£650
Contact: Paul
Country: United Kingdom
Email: click here
Tel:   


Date: 6/10/2020 4:24:11 AM Ref: 00098352
Holly Carb Vac Secondary Quick Change kit.
1x AED Quick Change Tuning Vac Secondary Kit. Part No 5585. £35
1x AED Vacuum Secondary Diaphragm. Part No 5340 £12
Both new unopened. Plus postage.

Contact: Paul
Country: United Kingdom
Email: click here
Tel: 07590 993327   


Date: 6/9/2020 4:59:56 AM Ref: 00098351
B&M pro shifter for sale
B&M pro shifter for TH350/400 and probably many other three speeds.
It’s fairly old now but works really well still, the cover isn’t perfect but it’s not too bad!
£75.00 posted in the UK, or contact me for costs to post further afield.
Contact: Ian
Country: United Kingdom
Email: click here
Tel: 07946 216568   


Date: 6/3/2020 1:03:41 PM Ref: 00098349
racepak parts
V net brake pressure module and sensor part no 220-vp-pt-b1500 £140
V net analog pressure transducer box with 3 sensors
60psi
200psi
300psi

£380
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 5/14/2020 4:43:31 PM Ref: 00098348
FORD FMX GEARBOX AND CONVERTER
Ford FMX gearbox with bell housing and converter.
FMX was built with performance clutches and steels and kevlar band.
Also has transgo shift kit.
Very firm shifts.
Small block Ford bell. I had it behind my 351 Cleveland.
TCI 482200 converter. 164 tooth flex plate if you want it.
All good when removed no issues.
Shift linkage and kick down linkage modded.
Need it gone now I'm upgrading.
£750.
Contact: Richard
Country: UK
Email: click here
Tel: 07446 322375   


Date: 5/14/2020 7:08:47 AM Ref: 00098347
Ford 8.8 Rear End and Wheels
From Fox Mustang limited slip.
Strange axles, Jegs rear cover/support, tubular lower control arms, adjustable upper control arms, Strange dampers, complete with brakes and hand brake cable £650.

Also wheels: 8x15 Weld Drag Lights x2 pairs; 1 with Hoosier slicks, 1 with Toyo road tyres. Slicks £380, Road tyres £350, to fit this rear end Ford four bolt 4/1/4.

Contact: Robin
Country: UK - Kent
Email: click here
Tel: 07702564469   


Date: 5/14/2020 3:57:08 AM Ref: 00098346
'69 Mustang fibreglass front wings
69 Mustang Fibre glass front wings Pro Stock Glass good quality unused still in original Gel coat £260ono
Contact: Gerry
Country: UK
Email: click here
Tel: 07914700986   


Date: 5/14/2020 3:54:42 AM Ref: 00098345
Torque Converter
Coan 10” Spragless Torque Converter to fit TH350/400 Built for a 540ci motor that made 1,000hp this converter is suitable for a engine running Turbos, Nitrous, or Supercharged, only ran in car never actually used comes in original packaging and data from Coan cost $1300 dollars plus shipping and duty. £675 Ono
Contact: Gerard
Country: UK
Email: click here
Tel: 07914700986   


Date: 4/22/2020 8:39:36 AM Ref: 00098344
WELD PROSTAR RACE WHEELS
BRAND NEW THESE WERE FITTED TO A PROJECT BUT NEVER USED

ALL 5 STUD FORD FITTING

REARS : 15x12 INCH WIDE TYRES MICKEY THOMPSON 31 INCH TALL 18.5 INCH WIDE

5 1/2 INCH BACK SPACERS

FRONTS : 15 x 4 INCH

TYRES FIRESTONE 155 x 15 INCH

COLLECTION ONLY HITCHIN HERTS

£ 950.00
Contact: Steve Pateman
Country: UK
Email: click here
Tel: 0797 091 7436   


Date: 4/22/2020 8:36:56 AM Ref: 00098343
FORD 9" INCH AXLE DRAG RACE HOTROD
3.55 INCHES WIDE

NARROWED AND BACK BRACED AND FOUR LINK BY JON WEBSTER.

RESPLINED HALF SHAFTS COMPLETE WITH SHOCK AND COMPLETE WITH FOUR LINK

NEEDS GOOD CLEAN WHERE BEEN SITTING

COLLECTION ONLY HITCHIN HERTS CASH ON COLLECTION

£ 1500.00
Contact: Steve Pateman
Country: UK
Email: click here
Tel: 0797 091 7436   


Date: 4/20/2020 7:06:56 AM Ref: 00098342
MOPAR - HEMI & BB Race Parts
Mopar BB 440 fab'd aluminium water inlet / outlet manifold with -10 aeroquip connections.

Aeromotive 2000 electric fuel pump.

TurboStart 16v Battery Charger (Brand new).

Stroud Parachute. Pilot chute a bit worn. On custom chromed framework (could be adapted?).

MSD DIGITAL 7 Programmable Ignition system. PN7530T.

MSD HVC Race Coil PN 8251 For use with MSD 7 Series ignition systems.

LIFELINE ZERO 2000 Fire Extinguisher bottle with bracket. Will need plumbing kit & recharging.

Hust Quarter Stick shifter. For 2 Speed Powerglide. With transbrake knob on top of handle. Complete with BIONDO electric solenoid shifter, control box, all wiring hook-up & shifter cable.

Jazz 3 gallon pro fuel cell. Upright pro-mod style. 2 x -10 outlets 2 x -8 return & -6 vent connection.

Jazz Race Car seat. Moulded bare. Brand new.

CV Products Oil Filter System. Stainless Steel cartridge type. With inlet/outlet fittings.

Painless Wiring complete race car system & loom. Fuse Box with all fuses, Relay etc + all wiring.

Mopar 440 BB WEIAND 'Rat Roaster' inlet mainfold. The one with the 2 x 4 barrel or single 4 barrel interchangable top section. Brand new. Never been on an engine. Very rare piece. Fitted with dominator-to-standard 4 barrel adapter plate with 850 DP Holley.

Mopar 440 BB WEIAND 'TEAM G' inlet manifold. With 1150 Race Holley Dominator. Fitted with Nitrous spray bar plate & inlet tubes.

TRS Black 5 point race harness. Centre twist buckle release. Tag expired.

TRS Red 5 point race harness. Centre Lever buckle release. Tag expired.

Star Pro Vacuum Pump. For Mountain Motors. Complete with custom mount bracket & all crank belt fittings, pulley, drives, shims etc.

I also have a 4 link bar set, rod ends, odd diffs, alternators, water pump housings, electrical bits, etc etc.

A lot of the above parts are from my Viper race car with the original 604 carb'd Hemi, before we converted to the Blower motor. Other parts from my original '67 Dart race car.
Everything works properly, has been dry garaged stored and is in good condition.
As I'll probably never be using these parts again, I'd ideally like to clear space in the workshop, so make me 'sensible' offers for anything you need.............. bear-in-mind I'm not giving this gear away, you all know how much this stuff is to buy new.
I have quite a few more racing & standard bits & pieces, mainly for BB Mopar / Hemi. If there's anything you particulary need, give me a buzz as there's a good chance I may be able to help you out from my vast collection of parts over the last 35 years.
Located down the A3 - just past Guildford, Surrey.

Photographs available of everything - just email me and I'll send.
Contact: Chris
Country: UK
Email: click here
Tel:   


Date: 3/11/2020 6:07:24 AM Ref: 00098339
Wheels/tyres and rear clip for sale
Pair Centreline Convo Pro wheels and tyres, 14x15” 5” backspace, 4.50“ and 4.75“ multidrilled rims, 29x18. 50x15 Mickey Thompson tyres, very good condition with nearly new tyres £850 collection from Wickford, Essex.

Complete rear clip, 9” narrowed axle 46 1/2” wide, complete with drum brakes, 3rd member, open diff, 4:11 gears and shafts, ladder bars, diagonal link, coil over shocks, all brackets, still fitted in car, mandrel bent chassis rails, aluminium tubs, crossmember and boot floor also availiable but will need to be cut out. £1600 Wickford , Essex.

Photos availiable just message me, thank you.
Contact: Dave
Country: Wickford, Essex
Email: click here
Tel: 07780798083   


Date: 3/6/2020 6:53:23 AM Ref: 00098338
407ci SBC complete carb to pan – 620HP – Just freshened up with dyno time only.
Dart Little M splayed 4 bolt block – bore 4.155 stroke 3.756

Lunati crank, Manley H beam rods, SRP dome pistons

Total Seal low tension rings, ARP fasteners

Dart Race Series Aluminium 220 Heads

SS valves 2.08 intake 1.60 exhaust – Titanium 7° Retainers

Crane roller cam, Comp Cams solid roller lifters

Crane 1.6 offset intake roller rockers – Lunati 1.5 exhaust roller rockers

ARP rocker studs, stud girdle

Cloyes Gear roller timing chain, Hex-Adjust gear, Quick Button two-piece front cover.

Dart Single Plane aluminium intake

MSD billet distributor, 8mm wires

Proform 950cfm carb, 1” spacer

Proform electric water pump

PRW 6.75” SFI spec 18.1 fluid damper

Rings, bearings, lifters and water pump new in this rebuild, nothing wrong with old lifters so included as spares. Some more spares including a few new rockers included too.

Has gone 9.90s in 1400kg (3100lbs) Camaro, easy 8s in light dragster. Great bracket motor, consistent, reliable, race winning (3 UK National championship wins).

Compression 11.9:1 Runs well on 98 Octane with 10% C12 or Octane Boost, or 10% MS109 if preferred. Dynoed with MS109.

Dynoed here in Sweden, at Mikael Lind’s facilities. Dyno sheets and details available.

Asking £10,000.00
Contact: Carla
Country: Sweden
Email: click here
Tel:   


Date: 2/29/2020 3:10:51 PM Ref: 00098337
rcd degree wheel
rcd 7 inch diameter degree wheel with 4 magnets £75
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 2/29/2020 3:36:20 AM Ref: 00098336
lenco air shift buttons
lenco air shift buttons
set of 3 for 4 speed £200
set of 2 for 3 speed £150
1off for 2 speed £80
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 2/18/2020 2:39:44 AM Ref: 00098335
Lotus éclat fibreglass body shell
Lotus éclat fibreglass body shell project for drag car front section cut to make flip front complete with doors boot and bonnet loss of storage forces regretted sale but has to go bodys nice and light I can pick it up and move it on my own classic shape will look nice tubed not funny it has to go needs a good home it could go on tube chassis grp floor still in or box frame I was going to use a tvr tube chassis with a big block engine bays a nice size £300 ono
Contact: John
Country: UK
Email:
Tel: 07759 784080   


Date: 2/11/2020 3:06:44 AM Ref: 00098334
Various parts for sale
Engine Chev 350 NOS fogger fresh bore 4 bolt with aluminum heads, roller cam,
4340 crankshaft, nos pistons, MSD, Carb shopp, elec wp, etc E 3950,-

Coan new TH 350 with transbrake E 1750,-
Coan new TH 400 with transbrake E 1950,-
Coan new 3500 nitrous converter E 750,-

JE ultralite flattop piston set new, part nr 105038 SBC 350 030 ( for 6'rods) with
pins and file fitting Speedpro rings E 850,-

SRP new dome piston set BBC part nr 212145-8 (for 4.350 bore and 6.385 rods) with pins E 475,-

Eaton new posi differential part nr 19603-010 8.2 10 bolt 28 splanes GM '64-'72 E 450,-

Chev 350 rebuild perf engine compleet for street use with 4bolt, new alu heads, Comp cams 274, Holley 750,
Hei, new oldskool valve cover and aircleaner E 4950,-

Foto's available from all.

Contact: Robert
Country: The Netherlands
Email: click here
Tel: +31 65 349 8781   


Date: 2/8/2020 5:31:52 PM Ref: 00098333
various parts
Darren mayer m4 sfi 14.2 blower restraint (new) and matching m4 injector hat spacer 9.5" opening (used) £500

msd six shooters £10 each 3 available

5" kobelco blower snout £150
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 2/8/2020 5:23:23 PM Ref: 00098332
lucas 70 weight oil
lucas 70 weight oil latest spec blue in 5 litres £20 each 15 available
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 2/4/2020 2:19:53 AM Ref: 00098331
Narrowed Ford Transit axle
For sale narowed ford transit axle"sherpa outer hubs jag disc brakes 39" wide 4.6 gears made by roy wilding would suite low powerd slingshot or hot rod also10x15 slot mags uniluged ,400 the axle and 275 the wheels could bring to dragstalgia
Contact: Laurette
Country: UK
Email: click here
Tel:   


Date: 2/4/2020 2:17:13 AM Ref: 00098330
Ed Pink blower
10-71 Magnesium Ed Pink Blower, this blower was completely rebuilt by Mooneyham blowers, teflon stripped Ed Pink Case and front and rear plates, no snout these Magnesium blowers and becoming hard to find , located in Essex

OIRO of £2250 please no more messers !!!

Contact: Tony
Country: UK
Email:
Tel: 07468 560036   


Date: 2/4/2020 2:14:50 AM Ref: 00098329
Chevrolet Dart 'Big M' Block and 4.00in. Scat crank for sale
Chevrolet Dart 'Big M' Block and 4.00in. Scat crank for sale.
Block tall deck 10.20in' 4-bolt mains,currently on 4.360 bore.
Block professionally 'O' ringed,align bored and honed by Jeff Bull race engines.
Block and crank had done 5-passes from new,when motor rodded itself.
One bore and 2in. of sump rail were damaged,the damage to sump rail of block has been
Professionally repaired by Ben and Kenny coleman at EDA.
One liner is needed in block,giving it endless cubic inch combinations,currently at 481c.i,with
this 4.00in crank.
The block will safely bore to 4.600in,with a 4.500in crank will give you 615c.i. so many combinations available.
The 4.00in. Scat crank has been checked by Kenny Coleman and is in perfect shape,and is on standard.
Photos of damaged bore. repaires to block rail and of crank available on request.
Over £3.000 has been spent on purchase and repairs to these parts.
Will make an awesome motor.

£1200 for Block and crank,will not split.

Contact: Dave
Country: UK
Email:
Tel: 07956 961114   


Date: 1/21/2020 3:46:30 PM Ref: 00098328
Various parts for sale
BAE engine- 475cui,Brad 100 tall block,Bryant 3.750 crank,cp rods(10 runs),je pistons,Brad 8x heads,psi d blower,cgc hat,Waterman little Bertha fuel pump,msd 44 mag with points box and coil,engine is complete,hat to pan,engine as is has gone 5,63@250 in a tmd
£28,000

Pro bell alloy bell housing 8-5/8,B&J 3 speed (billet front case,mag 2nd case,billet reverser),single spag,crower 10inch 3 plate big stand clutch,(flywheel,hat and donut have only done 30 runs)
£6000

Rpm data logger with dash and software

3 rpm
3 pressure
8 egt
Flow meter module
£1500

Mike boss 285inch tmd rolling chassis,2010 chassis,mag body,mark williams 11inch rear end,with carbon brakes,carbon front and rear wing,divetec titanium head shield,leahly safety shut off system,just drop your engine and trans in and go racing,we’ve run this car with both a 3 speed and clutch and a converter drive and 2 speed in fia tmd,this is still the newest tmd in Europe,comes with brand new never fitted spare rear wheels,and liners,car went 5.32@262 in the states and a best of 5.63@250 in Europe with above drivetrain,car has less than 80 runs on it
£16500

Contact: Karl
Country: UK
Email: click here
Tel: 07920 055501   


Date: 1/21/2020 2:46:45 AM Ref: 00098327
Various parts for sale
2 x pro mod/funny car hemi oil pan,suits KB/BAE Blocks (will not fit tfx blocks),can be used for wet or dry sump,neither been damaged,billet pan rail

£300 each obo

Dragster hemi oil pan,been damaged but repaired,also has a oil heating element fitted,fits KB/BAE blocks

£200

Complete msd 44 mag ignition system,Chevy rotation,complete with generator (small cap),2 x Rev limit points boxes,2x coils(1 coil is the msd one the other is the spud Millar @ fie big style),and a set of leads,all parts tested and good to go

£2000

1 x 16v starter motor for big block Chevy,suits 168 tooth ring gear

£75

All parts are collection only unless we arrange something at buyers cost

If you ring and I don’t answer leave a message or send a text and I’ll get back to you as soon as I can


Contact: Karl
Country: UK
Email: click here
Tel: 07920 055501   


Date: 1/16/2020 2:46:23 AM Ref: 00098326
Various parts

GENUINE Huddersfield made Holset 6 blade HX35
Had £200 rebuild and not been used.(invoice supplied) Also has “Tim’s Turbos” .63ar single inlet fast spool turbine housing Polished compressor housing Complete with Air Inlet filter and blue silicon adaptor.
£350

GENUINE Holset 7 blade
HX35
Slight wear
New compressor wheel.
Polished compressor housing
Has modified 12cm double volute turbine housing Complete with inlet filter.
£250

Note these Turbos are not Chinese or Polish!

Aeromotive A1000 fuelpump
With Aeromotive 100mic and 10mic in-line filters and anodized fittings.
£200

All plus postage
Pics supplied by email if reqd


Contact: David
Country: UK
Email: click here
Tel: 07968 137971   


Date: 1/14/2020 4:02:31 PM Ref: 00098325
BRAD 5 HEADS
2 pairs Brad 5 Fat Heads complete assy.
(1 pair fresh from BAE)
1 set Red Stand Rockers plus spares
Camshaft (54mm)
1 set Pushrods plus spares
Spare Valves
Spare Springs
Spare locks and retainers
Spare adjusters
Headers ( double skin funny car style)
£8500.00

Contact: Kev
Country: UK
Email:
Tel: 01425 489945   


Date: 1/12/2020 12:59:09 PM Ref: 00098324
CENTER LINE AUTO DRAG WHEELS & TYRES
CENTER LINE AUTO DRAG WHEELS & TYRES
5 1\2 " BACK SPACE
5 1\2" PCD OR 5" PCD AS UNI LUG
GOOD HOOSIER SLICKS 17.0\34.5-16 plenty life left
16" RIMS

£500 PAIR
HAPPY TO SEND PICS
Contact: Gary
Country: UK
Email: click here
Tel: 07834 899452   


Date: 1/12/2020 12:56:46 PM Ref: 00098323
Various parts for sale
Various Parts , pictures will be provided upon serious enquiries.
Buyers Organise Pick-Up / Pay for shipping

- x3 FRAM HP4 BBC Oil Filters - £30 (£10 each)
- K-Motion K-1000 Valve Springs NEW - £180
- x16 Titanium Valve Spring Retainers (suited for Dual Spring 1.6250 Outer spring) - £30
- Moroso Crankcase Evac-Kit #25900 NEW - £50
- x2 Magna Fuel 500 Fuel Pump Seal Kit NEW - £15 each
- CSR Electric Water Pump BBC (Need new Motor) - £75
- x2 Jesel Belt Drive BBC Complete - £600 each

- FULTON DART 18 Degree Big Chief Cylinder Heads - 2.4 Intake & 1.9 Exhaust , Roller Valve Springs , Titanium Retainers , 10 degree valve locks. (x4 Valves require replacing on 1 Head) , Jesel Big Chief Shaft Rockers (x2 need replacing) , Big Chief Valve Covers - £3,500

- DART Big Chief intake Manifold for Tall Deck 10.2 , Fully Flowed Single 4500 Flange (open hole) - £350
- Holley Aftermarket 1050 Dominator Carb Prt No-9375 (Blue Printed) - £575
- Phenolic 1" Carb Open Spacer - £40
- H-Duty Push Rods for 10.2 Big Chief Tall Deck BBC Heads - £60
- Moroso Water Neck (as New) - £45
- Fluidamper 7 1/4" Fully Degreed Internally Balanced - £100
- ATI Super Damper 7" - £125
- MSD Pro Billet Front Drive Distributor BBC #MSD8520 - £400
- MSD Pro Billet Oil Pump Drive for Chevy Front Drive Distributor Prt No.8513 - £200
- BG 4-Port Regulator - £100
- Weld Magnum Polished Strange Spindle Mount Front Wheels 15x3.5 , with Hoosier 25x5x15 Front Runners - £1,000
- BG 280 Fuel Pump (requires Seal Kit approx $20) - £100
- Trick Titanium Bell Housing 6-3 Certified 8 1/8" Depth with Press-Shaft Linkage + Candle Stick + Input Shaft - £1,500
- Lenco/Can Spare Candle Stick NEW - £80
- Spare Driveshaft , slight cut down Strange Yoke with 1350 U-Joints - £100
- STROUD 2-Piece custom Black Fire Suit Sfi-15 XXL 32A15 - £1,000
- CarbonX Nomex Underwear (Shirt/Leggings/Balaclava) XXL - £90
- Simpson Black Large Gloves - £30
- TCi BBC/SBC 168T Internally Balanced Flywheel #399273 - £60
- MSD Digital 7 Programmable Ignition (requires fixing by MSD as it wasn’t retarding Timing) - £200
- Auto Meter Sport-Comp Water Temp Gauge - £60
- Strange Hypercoil Front Springs 200Lbs - £80
- Strange Hypercoil Rear Springs 125Lbs - £80
- Jegs Valve Seal Install Tool for 0.500” & 0.531” PC Valve Stem Seals - £10
- US Pro Gear 9.5" 4.11 Ratio Ring Gear & Pinion 35-Spline (Brand New never used) - £250


Contact: Nick
Country: UK
Email: click here
Tel:   


Date: 1/8/2020 4:08:20 PM Ref: 00098322
Drivetrain for sale
Hemi Trick Titanium Clutch can with pedal clutch fork & bearing etc. + Crower 10" Hemi Alcohol 6 stand 3 plate clutch (Titanium donut). + 3 speed & reverser fine spline, large sprag CS1 in perfect shape, 1.41 (41%) & 1.48 (48%) (2.09 - 1st). + Straight coupler + drive shaft + Blankets + Shift pods & shift buttons includes steering wheel mounting + a few new & some refaced floaters & clutch discs. + Spare complete 25% gear set. + Lenco spare clutch's / floaters & new large sprag. (lots of bits). Everything you need to go between the end of the crank to the rear end. All in current tag & in as new / great shape.
Offers over £5000 or WHY.

Contact: Mark
Country: UK
Email: click here
Tel:   


Date: 12/30/2019 3:45:06 PM Ref: 00098320
Th400 gearbox
Th400 gearbox new torque convertor its been rebuilt hd and shift never used was going in my car but change of situation forces regretted sale. £1000
Contact: John
Country: UK
Email:
Tel: 07759 784080   


Date: 12/28/2019 4:04:46 AM Ref: 00098319
Various BBF Engine Parts
I´ve got the following used parts, all for BBF (429/460), for sale:

-Eliminator Premier Engine Block, 4.70" bore, fresh bore/hone before the 2019 Season (only 4 Races), new Lifter bushings for .904 diameter Lifters, made from a special bronze material
Price: 1500€

-Diamond Pistons for the block, 4.70 bore. Custom Order parts, many options, including rings and bolts, excellent like new condition
Price: 1200€

-Titan oil pump (wet sump) including pickup
Price: 200€

-Lunati Voodoo Crankshaft 4.5" Stroke, Part number 70745002. Used two Seasons, Magnafluxed before the 2019 Season without issues found. One Main has very light marks. I´ll send pictures and a video of the very slow rotating Crank on the lathe.
Price: 650€

for more details or pictures please send an email

Location: Munich, Germany

Contact: Franz
Country: Germany
Email: click here
Tel:   


Date: 12/22/2019 5:32:07 AM Ref: 00098318
end of decade sale
msd 44 amp mag £1000
msd 8147 points box £300 each
msd 44 amp coils £200 each
six shooters £50
msd powergrid modules 3 stage timer £100 each
blower restraints sfi 14.2 1 used stroud £150 1 New dmpe £350
dmpe 2" injector hat spacer £200
kobelco/dmpe 5 3/8" long blower snouts used £150 New £275

lucas oil
50 weight blue 5 litres £20
70 weight blue 5litres £20
20/50 5 litres £15
50 litres of each available
Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 12/16/2019 3:02:00 AM Ref: 00098316
I’M HAVING A GARAGE CLEAR OUT!!
Narrowed Ford 9” Axle
44 ½” between back plates,4.11:1 gears, Moser Spool and half shafts, alloy pinion bearing carrier, Ford 5 stud wheel pattern with parallel wheel nuts, stock case with lateral stiffener, brackets for wheelee bars, coil over shocks and 4 link, stock spring perches removed, stock drum brakes and shoes, parking brake removed, even has a drain plug!! Has had 880 bhp in a 2800 lb car through it for years with no problems

£800.00

Prop Shaft
39” long UJ to UJ, TH350/400 to Ford 9” Fitted to same car as the axle above and never twisted.
£70.00

Pr. AVO adjustable Shocks with springs
Rated @ 160 lb/in 2 ¼ I/D
£200.00

Pr 300lb/in 2 ¼ “ I/D springs
£100.00

Pr Wilwood solid 6” discs and callipers
£150.00

3 U.S. Gallon Fuel Cell(NOT S.F.I)
2x-10 outlets,1x-8 return,1x-6 vent
£40.00

1250 Dominator Methanol Carb
112 extended primaries, 114 secondaries, bowl extension on primary (full spec. Sheet with carb)
£600.00

Precision Performance Products 3 Speed Shifter
Reverse pattern, neutral safety switch,CO2 ram, 4ft rear exit cable with TH 400 bracket
£100.00

Pr polished BBC Valve Covers
With “screw on” style breather caps
£90.00

Chevy “ straight up” Chromed Thermostat Neck
Requires a Mopar thermostat if you use one
£10.00

6 Way Fused Switch Box
1x spring loaded Start, 1x illuminated Ignition, 2x Fuel Pump, 1x water pump/Fan, 1x Lights
Set up to allow starter to spin with ignition off
£150.00

Pr Rear Light Clusters for ’68 Camaro
Require bulbs
£50.00

Pr Cast Iron Oval Port BBC Heads (Bare)
Casting no 8996820 require valve guides refurbing. Originally on a 427 ‘Vette
£70.00

Pr 15x4 Drag Welds with 25x2.5x15 Front Runners
Have had accident damage could put them on a wall or something. IF YOU FIT THEM TO A CAR ITS AT YOUR OWN RISK!
£40.00

Pr 15x15 Drag Welds with 32x14.5.15 Slicks
Again they’ve been into the wall @ Santa Pod but could make unique coffee tables. FIT TO A CAR AT YOUR OWN RISK!
£60.00

All items will be sent at buyers cost and must be paid for prior to delivery

Contact: Paul
Country: UK
Email:
Tel: 07773 690120   


Date: 12/14/2019 4:20:37 AM Ref: 00098314
Half shafts for sale
For sale pair of new MOSER half shafts to suit ford 8” housing
Double drilled ford 4 x 4 ¼ and 4 x 4 ½
24.5” and 22.5” long
Suit centre housing 48” wheel to wheel
Supplied with wheel bearings, retainer plates and studs [1/2unf]
£400 OVBO

Contact: Hauser Racing
Country: UK
Email: click here
Tel:   


Date: 12/14/2019 4:18:36 AM Ref: 00098313
Chevrolet LT1 engine
1994 chevrolet LT1 engine,with the following parts:
Eagle crank and H beam rods,speed pro pistons,all balanced
Scorpion 1.6 ratio rockers
Comp Cams Beehive valve springs
Comp Cams CC502 roller camshaft
Comp Cams one piece pushrods
LS1 coil conversion ignition
BBK 53mm throttle body
65lbs injectors
Walbro fuel pump
electric water pump
High torque starter
new alternator,etc
ARP engine bolt kit
this engine was put together in the states then the car project abandoned so the engine parts are brand new.
picture and infos upon request
asking 4000€
engine is in Le Creusot,71200,France
ask for cyril
Contact: Cyril
Country: France
Email: click here
Tel: 0678154685   


Date: 12/14/2019 4:17:18 AM Ref: 00098312
MOTEC M48 ECU
MOTEC M48 ECU for sale, 2 ignition drivers + 8 injector drivers can be expanded to 8 ignition drivers

All the usual features

£500

Contact: Jeff
Country:
Email:
Tel: 07783 000949   


Date: 12/14/2019 4:07:47 AM Ref: 00098311
Red Line Oil Race 20WT


20WT RACE OIL
o Polyolester base stocks provide more stability and film strength when exposed to excess fuel dilution
o Red Line Race oils contain no less than 2200ppm of zinc and phosphorus for antiwear, one of the highest on the market
o Consistent wear and operation in drag racing classes like Stock and Super Stock (many switch to 5WT for Class Racing)
o Popular for qualifying in stock car engines
o Used by many top engine builders in Spec MX-5 and other low-power road race engines
o Provides more power and better wear in Four-Cycle karting engines like Yamaha/Burris F200, Briggs Animal and World Formula, Honda GX 160 and GX 200, Kohler, Techmseh, and Clones
o Improved protection at startup, lower oil temp, cleanliness
o Special detergents for improved lubricity and less detonation

Only £45.00 per USGallon Sold individually or a case of 4 . Can collect or shipped . Shipping costs extra .

Contact: Cindy
Country: UK
Email: click here
Tel: 01733 248500   


Date: 12/14/2019 4:06:20 AM Ref: 00098310
Nitrous kit for sale
wizard of nos nitrous street blaster kit never used cost approx £820 plus vat to buy. wanted £550.
photos available if required .
inc 11 lbs bottle.
Contact: Lee
Country: UK
Email:
Tel: 07967 157899   


Date: 11/25/2019 5:27:58 AM Ref: 00098309
*** WINTER SALE - OFFERS WELCOME ON ALL ***

OFFERS WELCOME ON ALL

----------

MOROSO 68345 BBC Billet Rail Valve Covers

Very good condition --- £200 (these are $450+ shipping/import duty etc new)

----------

Pair Goodyear slicks

34.5" x 16" x 17" - life left in them, stick them on your car or make a table - in our way --- £60

----------

Callies Magnum Big Block Chevy crankshaft

4340. 4.250" stroke (used with rod length 6.385")

Used for 2 seasons then we spun bearing. Had a grind 10 thou. Still very useable, always stored correctly --- £500

----------

Big block Chevy 8" harmonic balancer --- £25

----------

DMPE Set-Back Plate

Well used but will still do someone a turn --- £150

----------

PSI low profile injector magnesium

Very good condition --- £650

----------

Moroso 20385 Drag Race Oil Pan

Excellent condition - never damaged - --- £400 ($615 on Jegs)

----------

Cast aluminium big block Chevy valve covers

Great condition - very useable - just collecting dust here --- £50

----------

Blower case and rotors - Very useable. Selling separate as we found a hairline crack in blower case so selling case as dummy blower. Take the lot for £500 if you want to repair.

----------

Input shaft 8.5" long - course spline --- £75

----------

Mallory Pro cap adapter kits. Pro Cap Adapters kits convert a small (stack cap) Mallory/FIE magneto or distributor to a Pro Cap.
Made from thermoplastic material for high dielectric strength and impact resistance. Includes Pro Cap, Adapter and Wire Retainer

=== 3 x COMPLETE @ £40 each ($270 worth)
=== 4 x Pro Cap @ £20 each ($70 usually)

----------

---------------------------------------------------------------------------------------------------

*** MISC ***

0-100 psi gauge - we have 4 of these - brand new --- £25 each

----------

Mig wire - 15 kilo reel - 0.8mm --- £25

----------

Ford CVH RS Turbo head kit. Complete --- £50

---------------------------------------------------------------------------------------------------

*** Minibus / Camper ***

Iveco Minibus

We have cleared out the inside of all seats (kept some for crew) but it's ready for someone with some time to convert to a camper. It's already register a PLG.

£1500

6 Months MOT.

It's a good bus and pulls the above 30 foot trailer and car like it isn't there....literally you have to check. Sails up hills etc. Shout if you'd like a look.

---------------------------------------------------------------------------------------------------

*** Diesel generator ***

GENERATOR FOR SALE
SDMO SD6000 TE XL 6KVA PORTABLE GENERATOR DIESEL
YANMAR ENGINE
MAX OUTPUT 5200W
OUTLET SOCKETS 230V AND 400V 16A
26LITRE FUEL TANK
SUPER-SILENT CANOPY
PNEUMATIC TYRES AND LIFTING HANDLES INCLUDED
WOULD OF SEEN US WITH IT AT TRACK
THIS WILL POWER YOUR HOUSE OR WORKSHOP - LITERALLY

---------------------------------------------------------------------------------------------------

*** Wanted ***

A FUEL SCOOP - Any style considered

Damaged buzzard injector - must be aluminium

Blower bag for 8/71

Dragster / Altered windscreen



Contact: Luke Bennett
Country: United Kingdom
Email: click here
Tel:   


Date: 11/25/2019 3:03:43 AM Ref: 00098308
Ford 9 inch Detroit locker centre section
Ford 9 inch Detroit locker centre section, 28 Spline.
Good condition.
Note this is just the locker, I.e does not include gears or case
£175 firm.


Contact: Steve
Country: UK
Email:
Tel: 07971 173189   


Date: 11/25/2019 3:02:54 AM Ref: 00098307
666ci Ford Nitrous Engine + 2 Speed PowerGlide
666ci Ford Nitrous Engine + 2 Speed PowerGlide
(Ex Dave Townsend Motor)
C and C Ford Ali Block 11.2 Deck Height
Dry Sump oil system
Scat Forged Steel Crank
4.625 Bore
Ally Rods
ARP Studs all round
Danny Bee belt drive
J&E Pistons with Nitrous rings 15-1 Compression
Cometic Head Gaskets
Roller Cam and Bearings
Titanium Valves
Isky Triple Springs
Hogan Sheet metal Intake
2 1050 Dominator ultra light carbs
Too many spares to list please phone with any questions.
Motor has been 6.9 at 190mph with a very soft tune in a pro mod mustang.
Motor £25000 Glide £ 7000 ono


Contact: Bobby
Country: UK
Email:
Tel: 07900 188178   


Date: 11/25/2019 3:01:39 AM Ref: 00098306
Various parts for sale
Pictures will be provided upon serious enquiries.
Buyers Organise Pick-Up / Pay for shipping

- Stroud Outer Chute Bag + Lace NEW - £45
- x3 FRAM HP4 BBC Oil Filters - £30
- K-Motion K-1000 Valve Springs NEW - £180
- x16 Titanium Valve Spring Retainers (suited for Dual Spring 1.6250 Outer spring) - £30
- HAYS MK12 Twin Disc 6-Finger Steel Hat Clutch and 166T Flywheel +Spares - £700
- Strange U-Bolt for 9" Ford - £20
- Moroso Crankcase Evac-Kit #25900 NEW - £50
- Mark Williams 7318-1 Rear Wheel Spacers (0.5") - £45
- x2 Magna Fuel 500 Fuel Pump Seal Kit NEW - £15 each
- CSR Electric Water Pump BBC (Need new Motor) - £75
- Jesel Belt Drive BBC Complete - £600
- DART Big M Tall Deck Billet Steel 4-Bolt Mains Block (Damaged at bottom of 2-3 Bores but could have potential to be repaired once inspected) - £200
- DART 18 Degree Big Chief Cylinder Heads by Fulton - 2.4 Intake & 1.9 Exhaust , Roller Valve Springs , Titanium Retainers , 10 degree valve locks. x4 Valves require replacing on 1 Head. - £2,600
Option to add :- Jesel Big Chief Shaft Rockers (x2 need replacing) +£900 , Big Chief Valve Covers + £225
- DART Big Chief intake Manifold for Tall Deck 10.2 , Fully Flowed Single 4500 Flange (open hole) - £350
- Holley Aftermarket 1050 Dominator Carb (Blue Printed) - £575
- Phenolic 1" Carb Open Spacer - £40
- H-Duty Push Rods for 10.2 Big Chief Tall Deck BBC Heads - £60
- Moroso Water Neck (as New) - £45
- CSR Water Pump - £200
- Fluidamper 7 1/4" Fully Degreed Internally Balanced - £100
- ATI Super Damper 7" - £125
- MSD Pro Billet Front Drive Distributor BBC #MSD8520 - £400
- MSD Pro Billet Oil Pump Drive for Chevy Front Drive Distributor Prt No.8513 - £200
- Jegs H-Duty Mini Starter (BBC or SBC) 16:1 compression #JEGS10012 - £120
- BG 4-Port Regulator - £100
- Reg Plate - N20 PWR (on retention) - £500
- Reg Plate - Y7 YAM (on retention) - £500
- Weld Magnum Polished Strange Spindle Mount Front Wheels 15x3.5 , with Hoosier 25x5x15 Front Runners - £1,000
- BG 280 Fuel Pump (requires Seal Kit approx $20) - £100
- LENCO CS1 4-Speed Transmission Course Spline :-
Available with either -
Manual Towers + Hurst Lightning Rod Shifters + Line Loc button - £3,250
McAmis Lenco Air Shift Kit (Shifter+Air Pod Towers+Extensions+tubes&fittings) - £3,700
- Trick Titanium Bell Housing 6-3 Certified 8 1/8" Depth with Press-Shaft Linkage + Candle Stick + Input Shaft (suited for 166T flywheel) - £1,500
- Lenco/Can Spare Candle Stick NEW - £80
- CO2 Bottle 2 1/2Lb - £50
- 150psi Air Pressure Regulator - £40
- Driveshaft , Strange Yoke with Mark Williams 1350 U-Joints - £150
- Spare Driveshaft , slight cut down Strange Yoke with 1350 U-Joints - £100
- Lenco Ratios - 1st Gear 31% + 2nd Gear 34% , CS1 Course Spline - £400 EACH

Contact: Jan
Country: UK
Email: click here
Tel: 07900 693735   


Date: 11/18/2019 1:17:15 PM Ref: 00098305
Center Line fronts for sale
We have a pair of 15 Inch Center Line alloy drag racing front Wheels they are 15x4 stud pattern in 4.5x4 centre bore is 80mm in good condition, tyres on are 185/15s and hold air but ideally need replacing collection is preferred from NR35 but I can post but please message me to agree a price will be somewhere around £30, item number on eBay is 233376053369
Contact: Alice
Country: UK
Email: click here
Tel:   


Date: 11/17/2019 8:35:00 AM Ref: 00098304
Various parts for sale
Moroso BBC 68345 fabricated valve covers with additional holes to rear machined for breathers [could be blanked off] £250
Sealed power 327 Chevy +30” forged pistons and rings £250
Centreline Convo Pro 15x4 5x4.75 1.75 back spacing one only £120
ALL92040 inline oil filter -16 inlet and outlet fittings £60
Barry Grant mechanical fuel pump with mountings and drive system 1200hp on gas or 750hp on methanol £525
Flowmaster 7258500-7 collector mufflers 2.5in inlets £100 pair
ARP235-4302 BBC Brodix head stud kit £200
Or very best offer on all prices

Contact: Hauser Racing
Country: UK
Email: click here
Tel: 01933 682500   


Date: 11/17/2019 8:27:56 AM Ref: 00098303
Breaking 99 Camaro UK spec
Breaking 99 Camaro UK spec.
V6 engine, 460le auto, leather interior, alloys, most parts available, email or ring/text for availability and prices. All parts can be collected or delivered by carrier at cost. Pics available.
Body would make a good base for a race car as its the hardtop version.
Car is in Manchester area.

Contact: Al
Country: UK
Email: click here
Tel: 07948 376819   


Date: 11/17/2019 8:21:38 AM Ref: 00098302
1969 Camaro body
1969 Camaro body. Broken on one door pillar but an easy fix. Body only, no doors, boot lid or front
£1150.00 ono
Collection from the Uxbridge area.

Contact: Jon
Country: UK
Email: click here
Tel: 01622 790891   


Date: 11/3/2019 2:15:46 PM Ref: 00098301
Weld Racing wheels
Have some Weld Racing Beadlock Wheels for sale.

16x16
BS 4“
BC 5x5“

They are covered with flat black spray wrap.
Can remove easy and let it show in Polished and golden.


Contact: Ekert Drag Racing
Country: Germany
Email: click here
Tel:   


Date: 11/2/2019 3:39:54 PM Ref: 00098300
Hemi parts for sale
Hemi parts for sale


#new Browell 8 5/8 aluminum bellhousing
# new psi roots blower strips new/used hemi pulling roller cams
# new &used Crane .905 hemi roller lifters.
# SKF blower bearings for SSI blower
# new Stage V intake rocker arms new/used manton pushrods/adjusters
# new sparkplug wires, Clevite bearings, NGK606-11 sparkplugs, used fuelpump extensions
# enderle hat/port nozzle bodys flowed nozzles and by-pass pills, high speed lean outs, check valves, fuel shut-offs.
# lots off new/used an hose steel and nylon braided and hose ends 6and 8 an
# new racepak style pressure transducers
# used 6 runs blower belts 8mmGT 1600 long 75mm width new 104mm 8mmGT belts and pulleys
# 1 used KB stage 10 block with headstuds/nuts 4.310 sleeves and KB geardrive
# new Velasco Hemi crank 4.500 psi spline
# Hoffer turbine flowmeter 0,75-7,5GPM new 2,5-29gpm new and some used ones
# LSM L1000 valve springs [email protected] 16 new
# Erson springs 048 [email protected] 8 new
# 2 like new 3 bolt starterdogs
# 11”clutch discs 5135 material. no hub
# complete six shooter timing retard assembly
# AFT slide valve and BDK valve
# Fram HP6 pilfilters
# New Rage 25gpm fuelpump
# Complete Racing radio system for 3 crewman and driver
# new Star Racer Racer Plus 11mm belts 1595-084

Contact: Aart
Country: The Netherlands
Email: click here
Tel:   


Date: 10/28/2019 10:34:53 AM Ref: 00098299
Msd 44 mag and mag drive
Msd pro mag 44 with pro cap for hemi £1100
8147 points box £450
8142 coil £350
rcd angled mag drive part no 2500 0008 £600
new drive shaft for above part no 2500 0080 £100
rcd billet mag clamp part no 2500 0016 £75
rcd mag support part no 2500 0020 £130

Contact: bert
Country: United Kingdom
Email: click here
Tel: 07956343980   


Date: 10/28/2019 10:24:12 AM Ref: 00098298
Msd powergrid and modules
Msd powergrid 77303 in black new £385
msd powergrid 7730 used £300
Powergrid modules
7751 launch control £100
7760 3 stage timer £100
7440 connecter hub £45
all modules are used
Contact: bert
Country: Uk
Email: click here
Tel: 07956343980   


Date: 10/27/2019 11:42:52 AM Ref: 00098297
Lenco st1200 for sale
Lenco st1200 4 speed complete with billet throw out bearing tower I had machined to accept brand new Tilton bearing all Lenco parts included to bolt back to standard.
Input shaft included and brand new slider
Extremely rare these never come up for sale the most awesome gearbox for the street bargain on cost of a new one

£3300

Contact: Martin
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 11:40:38 AM Ref: 00098296
Various parts
GENUINE Holset 6 blade HX35
Had £200 rebuild and not been used.(invoice supplied) Also has “Tim’s Turbos” .63ar single volute fast spool turbine housing Polished compressor Complete with blue silicon adaptor and inlet filter.
£450

GENUINE Holset 7 blade
HX35
Slight wear
New compressor wheel.
Polished compressor
Has modified 12cm double volute turbine housing Complete with inlet filter.
£250

Aeromotive A1000 fuelpump
With Aeromotive 100mic and 10mic in-line filters and anodized fittings.
£250

Turbosmart FPR3000
£175

Turbosmart 38mm Ultragate
(Brand new)
£175

All plus postage
Pics supplied by email if reqd


Contact: David
Country: UK
Email: click here
Tel: 07968-137971   


Date: 10/27/2019 11:39:26 AM Ref: 00098295
MSD ignition control module
I have for a sale a brand new, unopened MSD 6AL-2 ignition control module. This will come with an unused pack of MSD vibration mounts.

Bought brand new from the US but never used.

£200 no offers

Collection from Northampton although postage can be arranged.

Happy to answer any questions.


Contact: Mark
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 11:38:39 AM Ref: 00098294
Type the heading for your ad here
Stage 5 RED stand rocker gear , both sides complete and in good condition. These were on my BAE 521 with "6" Heads , gone 6.2s at 228mph

Complete with spare stand (Brand New) , 8 spare exhaust rockers (Brand New) and two good used intake rockers with new rollers. Some other small spares included.

£2,500 for the lot

Contact: Wayne
Country: UK
Email: click here
Tel: 07969 298479   


Date: 10/27/2019 11:36:57 AM Ref: 00098293
Various parts
PAIR OF HOLLEY DOMINATORS
1250 PETROL BLOWER CARBS
FULLY REBUILT
£850


QFT 400 FUEL PUMP
QFT FUEL BLOCK/DISTRIBUTOR / REGULATOR
QUICK FUEL FILTER
ALL BRAIDED LINES TO FIT INCLUDED
£500



CENTER LINE AUTO DRAG WHEELS AND SLICKS
5 1/2 " AND 5" PCD
5 1/2 BACK SPACE
16" RIMS
GOOD HOOSIERS 17.0/34.5-16
£550


3 HOLE BUG CATCHER LARGE FOR TWIN CARB WITH PLATES
HAS PAINTED BUTTERFLIES BUT CAN BE REMOVED EASILY
£150

HAPPY TO E MAIL ANY PICS
Contact: Gary
Country: UK
Email: click here
Tel: 07834899452   


Date: 10/27/2019 11:35:42 AM Ref: 00098292
TOYOTA 2JZ 6 CYLINDER ENGINE
TOYOTA 2JZ 6 CYLINDER ENGINE FOR SALE COMPLETE
THIS ENGINE IS A MEAN MOTHER RACED IN A RAIL DRAGSTER AWESOME POWER SEE LIST.
as raced by Dave Nichols Dragster.


supertech pistons rated to 1500 HP .
Manley H tuff Conrad’s

Supertech performance valve set 1mm-os

Supertech bronze valve guides

Supertech single valve springs kit

Garage whitbitz oil filter housing stud

ARP main studs

King racing Conrod bearings

King racing main bearing kit

King racing thrust washers

1000cc injectors on whifbitz fuel rail

Borg Warner turbo

Hks external wastegate



Only done 12 quarter of a mile runs in a dragster. £10000
Contact: Brian
Country: UK
Email:
Tel: 07821 295969   


Date: 10/27/2019 11:34:18 AM Ref: 00098291
Various
1. Alumastar 2.0 Pro Mod wheel with Top Fuel center back beadlook ring
for sale 1150 €

2. Top Fuel Centers for Aluma Star
for sale each 230 €

3. Rear wing Carbon with stands and all brackets complete
for sale 1800€

Contact: Norbert
Country: Germany
Email: click here
Tel: +49 172 4373601   


Date: 10/27/2019 11:33:27 AM Ref: 00098290
M&T ET drag slicks and wheels for sale

Size 24.5 5/9.0 x13

Wheels are superlite type, nuts included. 4 stud Ford. Hardly used x3 runs, good condition. £150.00

Buyer collects, located near Beverley East Yorkshire

Contact: Mark
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 11:29:58 AM Ref: 00098289
Various
Pair of Weld Pro-Star front rims. 15 x 3.5.
In need of a good polish suit Anglia spindles, few marks on rims but good and true.
Sensible offers


Harness 5 point, duckbill latch brand new out of SFI tag. Wrap around 3” shoulder, bolt in lap belts 3” and wrap around crotch 2”
Sensible offers


Contact: Martin
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 11:20:35 AM Ref: 00098288
Four Minilite style wheels
Four Minilite style wheels from barn find kit car.

Made by Performance wheels 2 of 13x5.5JJ and 2 of 13x8JJ - Ford 4 bolt pattern.
Good for Old Skool Ford or 100E ??

Never been on the road but rims have some tarnish and need repolishing.

All got tyres but not worth anything.

£300 ono

Contact: Bob
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 11:14:57 AM Ref: 00098286
Wheels and slicks for sale
CENTRE LINE AUTO DRAGS 5 1\2 "BACK SPACE 5 1/2 " PCD 16 " rims WITH VERY GOOD HOOSIER SLICKS WITH PLENTY OF LIFE LEFT IN THEM

C 2055 17.0 / 34.5 - 16 HOOSIER SLICKS

WITH BEAD SCREWS FITTED

GREAT CONDITION

£600 PAIR ono

CAN SEND PICS BY PHONE OR E MAIL



Contact: Gary
Country: UK
Email: click here
Tel: 07834 899452   


Date: 10/27/2019 11:13:46 AM Ref: 00098285
Heads for sale
5,300 Sonnys heads for billet par Musi block . Complete With springs and valves, like new. 8000 $

Contact: Peter
Country: Sweden
Email: click here
Tel: +46 703 486 536   


Date: 10/27/2019 11:11:58 AM Ref: 00098284
Head and neck restraint for sale
Schroth SHR Flex, size large, low back head and neck restraint – as new, with helmet posts. Suitable for all seat angles. Demon Tweeks price is £496.97 inc vat. Selling because its the wrong size.

Would accept £200.00.

Contact: Roger
Country: UK
Email: click here
Tel: 07831 619688   


Date: 10/27/2019 11:09:36 AM Ref: 00098283
Various for sale
3000 stall torque converter to fit small block chevy 153 tooth flex plate £100.
2 ford 8" or 9" brake backing plates in good nic. £60.
2-3 speed ford gearboxes both good one from mustang small block & the other from 1966 galexie 6 cyl. £50 for both
also ex Dave Nichols Toyota turbo 6 cylinder engine this is an awesome engine ,please call for specs & details £10000.
ford 3 speed transmission removed from 1966 ford galaxie wagon .very little mileage will fit other fords £100.

also.
good pair of usable Hoosier slicks .still got life in them 32x14.5x15 ex darkhorse mustang.£100.
Contact: Brian
Country: UK
Email: click here
Tel: 07837 985973   


Date: 10/27/2019 11:02:31 AM Ref: 00098282
Big Block Ford Forged Crankshaft
I have a used forged Lunati Voodoo Crankshaft for a Big Block Ford for sale.
Stroke 4.5“
The Crank was used in our race engine for two seasons, it´s in excellent shape

Price: 1000€


Contact: Franz
Country: Germany
Email: click here
Tel:   


Date: 10/27/2019 11:01:01 AM Ref: 00098281
Mopar hemi/big block+chassis parts
-keith black billet oil pump:400€
-keith black cast oil pump:200€
-cast steel dragster/FC/promod oil pan with baffles,pickup:150€
-moroso alum oil pan(dragster/FC/promod):250€
-marine oil pan,OEM cast aluminum:125€
-moroso oil filter:125€
-440 souce swinging oil pickup:50€
-pete jackson gear drive:100€
-set of solid roller hemi lifters:150€
-Strange chromoly yoke for 727 torqueflite:125€
-turbo action race converter for torqueflite,AMC style(no starter ring gear):400€
-hurst pistol grip shifter,polished aluminum,standard pattern,for torqueflite,ford,amc,like new still in box:250€
-used stroud engine diaper:75€
-stroud 3 speed lenco blanket:100€
- hemi zoomie headers,chromed:200€
-big block mopar fenderwell headers for A body:200€
-trick titanium bellhousing with clutch fork,new lenco candlestick,etc:1000€
-steel race bellhousing:200€
-borg & beck 3 discs clutch (boninfante inspected):500€
-hayes 2 discs clutch:250€
-moroso pressurized oil tank:150€
-mallory(FIE) super mag 4 with base and coil,CCW rotation,never used:500€
-trick flow pushrods,new in bag,wrong parts ordered:20€

chassis parts:
-complete FC front end including fuel tank chassis cradle,welded torsion arm suspension splined bar,straight axle,anglia style spindles,arms,fuel tank:500€
-cragar super star front anglia spindle mount wheels:250€
-cragar superstar 16X16 beadlock wheels,5X5 pattern:900€
-hoosier liners for 16X16 wheels,new:120€
wheelie bar wheels:20€ each
-olson alum wing with struts:400€
-plastic fuel cell(full of foam):100€
-chris alston front/mid engine plates for big block mopar,new:200€
-hurst line lock:60€
-khul blower bag:75€
-vintage motometer tach:25€
-vintage SW water gage+chrome cup:75€
-deist camlock 5 point harness:100€
-rci racing seat with cover:100€
-jaz racing seat with new cover:150€
-C5 corvette alum promod wing:300€
-C5 corvette tail light bezels:20€

pics and infos available upon request
english spoken

shipping cost extra.
prices subject to negotiation if multiple purchase


Contact: Cyril
Country: France
Email: click here
Tel: 06 78 15 46 85   


Date: 10/27/2019 10:57:51 AM Ref: 00098280
Big Block Chevy 454
Big Block Chevy 454 out of running car.
Roller rockers
Bigger push rods
Mild street cam
Holley 750DP
Carb to pan virtually stock engine
(NO WATER PUMP)

£3000

Contact: John
Country: UK
Email:
Tel: 07957 355123   


Date: 10/27/2019 10:56:31 AM Ref: 00098279
Various parts for sale
Bbchevy merlin 3 .10.2 tall deck block freshly alignbored ready to go.4600x4750.£950
Weiand 8204 BBC rectangle port spacers full kit brand new
To fit 9.8 intake to 10.2.£90
Pair of complete bbchevy aluminium RHS cylinder heads in excellent condition £1500.
350 goodwrench small block chevy.4 bolt mains.edelbrock intake.holley carb.mini starter.electric water pump.mallory dizzy.good running order.£1600

Contact: John
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 10:55:40 AM Ref: 00098278
Goodyear front runners
For sale, a pair of new Goodyear front runners D2991 25.0 X 4.5 - 15
We did onley 6 runs on it but they are to high for us, onley 350.- euro

Contact: Marck
Country: The Netherlands
Email: click here
Tel: +31 31 653 400 718   


Date: 10/27/2019 10:50:28 AM Ref: 00098277
Complete Methanol 1250 CFM carburetor and fuel system
FOR SALE: Complete Methanol 1250 CFM carburetor and fuel system, ready to bolt on. The carb is a BLP Dominator with billet metering blocks, extended jets and contoured float bowl for the front of the carb. The carb has been calibrated by Tony Morris and comes with spare jets for fine tuning. The carb has a BLP telescopic fuel log for ease of plumbing. The fuel pump is a BLP .500” internally regulated belt driven pump. The bracket suits a Big Block Chevy but this can easily be changed for different applications. There is a -8 BMRS braided hose to go between the pump and the carb. I have the pulley to go on the crankshaft and a drive belt to suit. I have run this entire fuel system on a 565” big block Chevy which made 750+ hp on the dyno, the fuel system would suit any Big Block between 700-900 hp. This is literally a bolt on system which is ready to go, you won’t need any other parts. Benefit from the reduced running costs and the cool engine temperatures of a methanol fuel system. I am looking for £1250 ONO for this complete setup.

Contact: Luke
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 10:48:29 AM Ref: 00098276
F3 PROCHARGER GEAR DRIVE.

New Chris Alston Chassisworks CDS crank driven single gear drive for any of the F3 prochargers. The gear drive is for a BBC engine & everything was supplied through Steve Morris Engines. I have loosely assembled the gear drive but it is all brand new and have the original paperwork from the sale.

Any of the "F3" range of prochargers will fit the gear drive.
Please check out cachasssisworks.com and stevemorriesengines.com for more information and the potential of the gear drive and procharger to go fast.

The gear drive will also include the following:

-Aeromotive Billet hex drive fuel pump part no SKU:11107.

-CS130 alternator - 95a idle. 125a cruise. 140a high rpm.

-Procharger big race valve.

The most relevant information from the spec sheet is as follows.

- Procharger F3 single-A BBC 12 pin 60% overdrive single drive for angle mounted procharger F3 with 6 pin A bushing on. 992 input shaft & 12 pin 33 spline B bushing on CN cross bolt big block chevy with 1.380 wide gearset.

- Alternator drive angled-p 1.60 ratio type 1 angled gear box passenger side mount 20 & 32 tooth sprockets blower drive hub H-mount for 8m poly chain belt x 21mm wide.

- Sportsman configurable accessory drive with 12mm belt, 50% reduction, 1" bore sprocket for type l CDS gear box input, 3/8 female hex drive, selectable accessory connections.

I can supply plenty of pictures via email or WhatsApp of everything I have.

Price: £4,500 GBP

The price is for everything collected only within the UK.
I would be willing to ship overseas for extra cost, supply tracking information but this is at your own risk.

Contact: David
Country: UK
Email: click here
Tel:   


Date: 10/27/2019 10:26:09 AM Ref: 00098275
Powerglide for sale
Chevy powerglide recently checked and serviced, stock case with th400 shaft, trans brake, full Manuel valve body, Cast deep sump, 10am oil lines with b&m cooler, trans temp gauge and sensor mounted, TCI red anodised shifter with trans brake button and cable.

Complete setup fully working

£1000 no offers and won’t split.

Heathrow area.

Contact: Darren
Country: UK
Email:
Tel: 07920 771666   


Date: 8/14/2019 4:33:20 PM Ref: 00098273
Lenco cs1 large spline
Lenco cs1 large spline.
3 speed lenco with reverser. Great condition just rebuilt with new manual shift towers.
A few spares. Ratios are 1:56 and 1:30
£1400

Contact: Martin
Country: UK
Email: click here
Tel:   


Date: 8/14/2019 4:27:08 PM Ref: 00098271
Race suits
I am looking to sell a couple of my old race suits now I have moved up!

1- Simpson suit: 2012 3.2A/15 layer, size Medium in top and bottoms. ( Has only been worn a couple of times) Looking for £950 Ono.

2- Simpson suit 3.2A/5 layer, size large in top and bottoms.
Looking for £300 Ono.

3- Sparco 2012 all in one suit size (56) 108-112 waist, 182-188 height.
Looking for £140 but open to offers.

A couple of other bits I would like to sell:

1- Sfi spec 3.3 arm restraints, crow enterprises.
£20 Ono.

2- Sfi spec 3.3 arm restraints, TRS.
£15 Ono.

3- Sparco race boots sfi spec 3.3/5, size: 41
£50 Ono.


Contact: Annie
Country: UK
Email: click here
Tel: 07393568423   


Date: 7/30/2019 1:44:05 PM Ref: 00098270
Various parts for sale
Milodon Big block Chrysler Drag racing oil pan for use with a twin swinging pick-up. Quick release baffle for cleaning.Used. £220

B&M Trans cooler Used Good condition. 8x11x1.5 in. £35.

Un- used Power Glide, Locking dip stick. Bolt on, steel. £30.

Used. Dedenbear Throttle Stop Controller TSC-4 Four timer. £45

B&M mushroom button switch with cord new un-used packaging poor condition. Parts Ok. £38

BG 2 or 4 port fuel regulator with pressure gauge. Plus 2, -6 fittings and two plugs. -8 in let fitting. Used. £45

Power Glide front Prop yoke un-used. £40.

Contact me for pictures and more information.
Contact: Paul
Country: UK
Email: click here
Tel: 07590 993327   


Date: 7/17/2019 2:19:58 AM Ref: 00098269
565 Chevy Big Block Engine
565 Chevy Big Block Engine
Dart “Big M” Cast Iron Block
23° Dart Pro 1 355cc Aluminum Cylinder Heads
Manley S/S Int & Exh Valves w/Titanium Retainers
RMRE Fully CNC Contoured Domes
4340 Forged Steel Internal Balanced Crankshaft
4340 Manley H-Beam Rods w/ARP 2000 Bolts
RMRE Spec Pistons
RMRE Spec Ring Sets
Clevite 77 “H” Series Performance Rod/Main Bearings
RMRE Spec Steel Billet 7/4 Swap F.O. Roller Camshaft
Isky Solid Roller Lifters
Manley Billet Double Roller Chain Set w/Torrington Bearing
RMRE/Moroso Wet Sump Oiling System
ATI Internal Harmonic Damper
RMRE Logo Valve Covers Polished Aluminum
Stud Mounted Aluminum Roller Rocker Arms
RMRE Spec Single 4 Barrel Carburetor
RMRE Single Plane/Single 4 Barrel Intake Manifold
MSD Custom Billet Distributor w/Magnetic P.U.
RMRE CNC Anti-Reversion Plate w/Matching Spacer


Price $9,500

Contact: Louis
Country: UK
Email: click here
Tel: +1 904-990-5030   


Date: 7/17/2019 2:17:06 AM Ref: 00098268
BBC Crower/ Kinsler injection
BBC Crower/ Kinsler injection. Can Am style
2.90” intake. Short ( 5.50”) chrome stacks. Throttle shaft bushes all good.
Recently soda blasted back to original aluminium.
Lucas double 8mm metering unit with drive and injectors goes with it.
£2000 ONO
Contact: John
Country: UK
Email:
Tel: 07715 007916   


Date: 7/3/2019 4:13:27 PM Ref: 00098267
Bump box for sale

Davis technologies bump box brand new has been wired in but not used .
£300
Contact: Karl
Country: UK
Email: click here
Tel: 07740 868314   


Date: 7/2/2019 7:43:49 AM Ref: 00098266
Various parts for sale
Mallory Comp 9000 electronic dizzy (new?) £90
New Crower hydraulic street strip cam (460 lift ) and lifters £125
New Pioneer SBC rod bolts £25
New Morosso stud girdle SBC £50
New Mr Gasket 7/16 rocker studs p/n 1074 £35
New Mr Gasket sure lock rocker arm nuts p/n 921 (slightly soiled ) £20
New Mr Gasket Cam button spacer sbc p/n 1180 and offset cam bushings p/n 85 £15
New Miloden sbc oil pump deflector plate £5
New Manley SBC front timing cover seal £5
New Crane aluminium hard coat retainers p/n 99606 £20 (packaging damaged)
used Holley regulator £10
SBC mini starter listing as used but as new £70
32 spline funny car drive shaft 20 inch long £70
16 spline funny car drive shaft 27 inch long £70
16 spline coupling sleeve £40 each 2 available
16 spline male couplers £50 each 2 available (1 x long 1 x short)
Aluminium drive shaft collars £20 per pair

Ford 390-428 rear main seals believed to also fit early Donovan 417 blocks 5 sets £20 for all

Blower belts
New RCD 1543 - 13.9 - 65 HT £100
Used 1694 - 14-65 £60 each (1 slighrtly marked £40)
Silver DJ 426 hemi diaper rough condition £40

All prices plus postage at cost or could take to Dragstalgia

Contact: Richard
Country: UK
Email:
Tel: 07624 425619   


Date: 7/2/2019 2:51:15 AM Ref: 00098264
572 cubic inch BBC
Dart tall deck block with steel main caps Steel crank I beam connecting rods
2 x sets of pistons
1 set of new forged Ross racing pistons 11:1 compression ratio Used 8:1 compression ratio pistons New Mildon oil pan and pump CSR electric water pump Canifield pro mod heads New 450 pattern victor junior intake manifold New billet distributor Full roller cam and followers
1.7 roller rockers and stud girdle
Carbon fibre valve covers
Harmonic balancer and flex plate

Just add carburettor!

£8250


Contact: Rob
Country: UK
Email:
Tel: 07702 564469   


Date: 7/2/2019 2:45:57 AM Ref: 00098263
Various parts for sale
’72 Plymouth Barracuda steering wheel £50

Weld Dragstars, Ford stud pattern for sale 2no. 5 x 15 with BFG’s & 2no 8 x15 with part worn BFG’s inc. Centre caps.
£400

New Centreline centre caps for sale £40

FORD AOD TRANS for Ford small block v8. Newly rebuilt, never used. Comes complete with correct converter, drive plate and shifter. £900


Contact: John
Country: UK
Email:
Tel: 07837 868543   


Date: 7/1/2019 2:46:21 PM Ref: 00098262
MILODON STREET/STRIP DEEP OIL PAN

BBC gen iv, Part no. 31100,
Approx 9.5" deep, 7 quart capacity,
£130

Contact: Ian
Country: UK
Email: click here
Tel: 07932 688648   


Date: 7/1/2019 2:42:47 PM Ref: 00098261
Drag radials for sale
Selling 3 nitto 555r drag radials size 275/50r15 selling due to no car to fit them to and are brand new only just arrived.

£180 each cash on collection or bank transfer.

Can post at buyers expense.

Contact: Phil
Country: UK
Email: click here
Tel: 07815 504148   


Date: 7/1/2019 2:41:14 PM Ref: 00098260
Big Block Chevy race motor NEW LOWER PRICE AND OPTIONS!
I am selling a Big Block Chevy Race motor. This is a 565” motor built around a Chevy Bowtie block, with a complete top end package from Dart. This engine has just benefitted from a full rebuild and freshen, including new Clevite bearings, Total Seal gapless piston rings, Cometic MLS head gaskets, belt for the Jesel cam drive, all gaskets and seals and much more besides. ARP fasteners have been used throughout the build. The engine is set up to run on methanol and comes complete with a BLP methanol carb tuned by Tony Morris and a BLP internally regulated mechanical fuel pump. Here is a basic run down of the engine spec:
• Big Block Chevy, 565 cubic inch
• Scat forged crankshaft, 4.25” stroke at standard/standard
• Eagle H beam rods
• Ross Pistons 4.6” bore with ceramic skirt coating
• Total Seal gapless piston rings
• Clevite bearings
• COMP Cams 11-808-9 Camshaft
• Comp lifters, bronze sleeved lifter bores
• Dart Race series 320cc heads with Dart 'Full Port' (CNC) porting
• 2.300” intake valves, 1.880 exhaust valves
• Crane rockers 1.7 ratio
• Dart stud girdle
• Cometic MLS head gaskets
• Dart intake manifold
• BLP 1250 CFM Alcohol carb tuned by Tony Morris
• BLP .500” internally regulated belt drive fuel pump
• BLP fuel log
• Stef’s oil pan
• Jesel belt drive
• MSD front mount distributor
• MSD crank trigger
• Moroso vacuum pump
• CSI electric water pump and water neck
The engine has just been run on the dyno at EDA (Kenny Coleman’s) and made 753hp at 6200rpm and 684 ft/lbs torque at 5300rpm.
I can provide a more detailed spec upon request as well as full documentation of the rebuild including build notes and photos of every stage. I can also supply dyno sheets and videos.
This motor has only got dyno time on it since the rebuild and is timed, jetted and ready to plug and play into your car. This would be a perfect engine for Super Gas/Super Comp, benefit from the cool running and cheap fuel costs of methanol and the reliability of a large Big Block Chevy engine.
Price reduced to £10,500 but I am open to offers, also I can offer the following options:
Option 1: Engine complete, as it is, ready to go, £10,500 ONO
Option 2: Engine less methanol carb and fuel pump, £9,500 ONO
Option 3: Engine with rear mount distributor instead of front mount, knock off £200
Option 4: Engine less vac pump, knock off £200
So you could get this engine for £9,100 if you don't want the methanol fuel system, vac pump or front mount distributor!

Please call or email for more details

Contact: Luke
Country: UK
Email: click here
Tel: 01256 880589   


Date: 7/1/2019 2:30:33 PM Ref: 00098259
Various parts
1 pair new dynotech header flanges 796-21637. Big block chevy.2 ¼ inch. £30.
1 set new JE gudgeon pins. 990-2930-18-51s. £30.
1 set used but in perfect shape,7941 comp cams moly push rods. 9.250 long, 0.80 wall thickness. £30.
1 set used but in perfect shape, 7931 comp cams moly pushrods. 8.280 long, 0.80 wall thickness. £30.
1 set used but in perfect shape, p.a.w . roller rocker arms. 1.7 ratio. £50.
1 pair brand new S.C.E. titan copper head gaskets.big block chevy.T13525. 4.520 bore. 0.50 thick. £150.
1 used 1440 8mm blower belt 3 inch wide. Good condition. £30.
1 blower snout mounted belt tensioner. Good condition. £50.
1 used trans oil cooler. 17” x 8”. £20.
1 new big block chevy crank shaft bolt. ½ unf tread. Tread length 1 ¼ inches. £10.
1 set new poly locks. For 7/16 stud. £20.
1 new stainless steel pump loop line with T fitting. An 6 fitting size. £20.
1 used blower turning plate.£10.
1 set hardly used snap-on double ended ring spanner set. 6mm – 20mm. £50.
1 set hardly used snap-on short combination spanner set. 10mm – 19mm. £50.
5000 horsepower on methanol book by bob Szabo.£30.

can take to dragstalgia

Contact: Chris
Country: UK
Email: click here
Tel: 07876 504864   



No more advertisements in this category



Eurodragster.com aims to bring you links to all the best European Drag Racing web sites. To add your site to Eurodragster's listings, simply email [email protected] with your URL and a little information about your site and we'll do the rest. When you update your site, drop us a line at [email protected] and we'll feature your site in our "What's New" section.

Eurodragster.com is a non-profit-making organisation run by a small group of Drag Racing enthusiasts for the sole purpose of promoting European Drag Racing. If you can help us to meet the modest cost of hosting this web site by advertising here, please email [email protected]. We're sure you'll find our rates extremely competitive.