|
Cars
Parts wanted
|
Date: 1/1/2024 7:23:03 AM
|
Ref: 00105587
|
Wanted 454 Big Block Chevy Engine
Wanted 454 Chevy Big Block for rebuild ideally standard bore, no silly prices please, or will take a block and a pair of rectangle port heads contact Dave
|
Contact: Dave
Country: United Kingdom
|
Email:
click here
Tel: 07904 115669
|
|
|
Date: 9/9/2023 5:48:28 AM
|
Ref: 00105584
|
Aluminum bellhousings for a Ford 302 Windsor
I’m after a few aluminum bellhousings for a Ford 302 Windsor, to cut up and try some less common gearbox swaps for my Scimitar. The engine end needs to be ok but the gearbox end doesn’t matter. Any type/ condition ok (a good chance to get rid of some of your scrap!).
Ping me with what you have, I’m in East Midlands UK, so close would be better but don’t be shy if you’re in Devon!
|
Contact: Paul
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 6/20/2023 2:57:28 PM
|
Ref: 00105583
|
SFI-15 or SFI-20 fire suit
Looking for a SFI 15 or a SFI 20 fire suit, medium to large preferably in tag or retagable
|
Contact: Kai
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 6/13/2023 4:09:56 PM
|
Ref: 00105582
|
Wanted 4.6 3v Ford engine
Wanted 2007 4.6 3v aluminium block Ford engine, also Manley pistons and rods for same engine, other parts required gaskets etc what have you got?
|
Contact: Jeff
Country: United Kingdom
|
Email:
click here
Tel: 01702 543000 or 07789 013274
|
|
|
Date: 3/7/2023 6:00:18 AM
|
Ref: 00105581
|
Pair of Chevy pattern Weld Pro Stars 3.5" x 15" wanted
Pair of Chevy pattern Weld Pro Stars 3.5" x 15" wanted.
Contact Lucas - based in UK
|
Contact: Lucas
Country: United Kingdom
|
Email:
click here
Tel: 07770 482926
|
|
|
Date: 1/2/2023 1:03:22 PM
|
Ref: 00105580
|
Wanted drag tyres for front of Civic EG
Approx size required is around 24.5x8x15
Racing at end of February and being my first time I don’t want to spend the money on a new set just yet.
|
Contact: Steven
Country: United Kingdom
|
Email:
click here
Tel: 07368 958057
|
|
|
Date: 10/25/2022 4:53:12 AM
|
Ref: 00105578
|
Wanted for Lenco CS 1
Looking for 25% course spline gear set for Lenco CS1. Have 31% Spare if need to swap.
|
Contact: Nigel
Country: United Kingdom
|
Email:
click here
Tel: 07901 580879
|
|
|
Date: 10/4/2022 2:52:10 PM
|
Ref: 00105577
|
MSD Pro Mag 44 Amp
Wanted: MSD Pro Mag 44 Amp part number 8140 CCW for Hemi.
|
Contact: John
Country: United Kingdom
|
Email:
click here
Tel: 07860 236135
|
|
|
Date: 10/4/2022 5:49:39 AM
|
Ref: 00105576
|
Powerglide wanted for SBC
Powerglide wanted for SBC
Preferably ready-to-go
Preferably Reverse pattern manual valve body
Torque converter considered (if it’s about right for the application)
|
Contact: Drew
Country: United Kingdom
|
Email:
click here
Tel: 07816 390962
|
|
|
Date: 9/27/2022 2:08:11 PM
|
Ref: 00105575
|
Ford 289 / 302 oil pan / sump
Wanted: Ford 289 /302 oil pan/sump front bowl type. Std or winged.
|
Contact: Bill
Country: United Kingdom
|
Email:
click here
Tel: 07956 176026
|
|
|
Date: 9/15/2022 4:07:27 PM
|
Ref: 00105574
|
Electric shifter solenoids
Looking for an electric shifter solenoid for an RMVB TH400 GM box.
I am in the West Midlands.
|
Contact: Berty
Country: United Kingdom
|
Email:
click here
Tel: 07564 166529
|
|
|
Date: 5/31/2022 2:36:25 PM
|
Ref: 00105573
|
wanted clutch floaters
wanted 11 inch bronze floaters for aft 12 stand clutch
also 11" discs
|
Contact: bert
Country: United Kingdom
|
Email:
click here
Tel: 07956343980
|
|
|
Date: 3/12/2022 3:55:24 AM
|
Ref: 00105572
|
Big Block wanted
Looking for aftermarket Big Block. Dart, Merlin 4 or Bowtie 9.8
Also forged crank 4.250
Forged Rods 6.385
Any other parts let me know
|
Contact: Steve
Country: United Kingdom
|
Email:
click here
Tel: 07710 075130
|
|
|
Date: 1/9/2022 4:52:40 AM
|
Ref: 00105571
|
Complete BBF engine wanted
Complete BBF engine wanted
Ideally a complete street/strip engine
|
Contact: Ian
Country: Isle of Man
|
Email:
click here
Tel: 07308 676724
|
|
|
Date: 9/27/2021 4:17:04 AM
|
Ref: 00105570
|
Propshaft for 1965 Mustang
Need standard propshaft for 1965 Mustang 289 C4 trans
Anything considered
|
Contact: Mark
Country: United Kingdom
|
Email:
click here
Tel: 07709 428195
|
|
|
Date: 9/16/2021 6:45:02 AM
|
Ref: 00105569
|
Centerline Auto Drag wheels wanted
Wanted: Centerline Auto Drag wheels 7x15, 10x15 or 12x15 Chevy pattern.
|
Contact: Duncan
Country: United Kingdom
|
Email:
click here
Tel: 07879 615393
|
|
|
Date: 8/30/2021 7:44:18 AM
|
Ref: 00105568
|
Wanted: Lenco CS1 fine spline 1:28 gear ratio
Looking for a Lenco CS1 part, a gear set 1:28 fine spline.
Let me know if you have some or you know somebody has it for sale?
VooDoo Hemi racing, contact Marck.
|
Contact: Marck
Country: Netherlands
|
Email:
click here
Tel: 0031 6534 00718
|
|
|
Date: 8/28/2021 5:38:53 AM
|
Ref: 00105567
|
Engine wanted for project
Wanted for a project, a late motor kit like a blown LS with gearbox and all ancillaries would be ideal, but a small or big block blown motor would probably do.
I'm looking for a full kit for street/strip use so nothing too crazy, but between 500hp-1000hp is good.
Or just a blown motor and I can find a gearbox separately.
Anything considered.
|
Contact: Mick
Country: United Kingdom
|
Email:
click here
Tel: 07880 9989999
|
|
|
Date: 7/29/2021 6:47:22 AM
|
Ref: 00105566
|
Large 40 degree Hans device wanted
Wanted ASAP Large 40 degree Hans device or similar make, please.
Used / second hand up to £200 max
|
Contact: Des
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 6/13/2021 5:20:09 PM
|
Ref: 00105565
|
WANTED C4 TRANSMISSON GOOD OR BAD.
|
Contact: Brian
Country: United Kingdom
|
Email:
click here
Tel: 07837985973
|
|
|
Date: 6/8/2021 5:49:34 AM
|
Ref: 00105564
|
Wanted Mopar 383 tunnel ram
Wanted Mopar 383 tunnel ram with or without carbs etc, even a damaged one as I can weld it up.
|
Contact: John
Country: United Kingdom
|
Email:
click here
Tel: 07883 217537
|
|
|
Date: 5/28/2021 10:27:16 AM
|
Ref: 00105563
|
440 Mopar Engine Block
Wanted good condition 440 mopar engine block.
|
Contact: Howard
Country: United Kingdom
|
Email:
click here
Tel: 07913 114759
|
|
|
Date: 5/24/2021 5:58:15 AM
|
Ref: 00105562
|
MSD 6AL control box and MSD 8485 Distributor
Parts wanted: MSD 6AL control box and MSD 8485 Distributor
Message 07891 072161
|
Contact: Andrew
Country: United Kingdom
|
Email:
click here
Tel: 07891 072161 (message)
|
|
|
Date: 4/30/2021 5:35:52 AM
|
Ref: 00105561
|
Entry-level wet plate nitrous system
Simple entry-level, wet plate nitrous system for square bore 4 barrel carb, something like NOS sniper capable of between a 50-150 ish shot
Contact Paul on e-mail with the price and what you’ve got
|
Contact: Paul
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 4/25/2021 3:30:58 PM
|
Ref: 00105560
|
BBC wanted
Big Block Chevy wanted preferably 496/540/555/565 pump gas compression.
|
Contact: Steve
Country: United Kingdom
|
Email:
click here
Tel: 07904 867948
|
|
|
Date: 3/21/2021 4:12:23 PM
|
Ref: 00105559
|
Tremec TKO gearbox wanted
Tremec TKO or T5 world class gearbox wanted, with bellhousing for a small block Ford.
|
Contact: Rik
Country: United Kingdom
|
Email:
click here
Tel: 07890 215116
|
|
|
Date: 3/14/2021 4:27:44 PM
|
Ref: 00105558
|
Wanted fiberglass two inch cowl scoop
Wanted fibreglass two-inch cowl scoop like the Camaro ones.
Please e-mail.
|
Contact: Jim
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 3/5/2021 10:51:16 AM
|
Ref: 00105557
|
Top Fuel style rear wing
Wanted, Top Fuel style rear wing, for a road car, want the look. Please call.
|
Contact: Alan
Country: United Kingdom
|
Email:
Tel: 07956122483
|
|
|
Date: 2/17/2021 5:34:52 PM
|
Ref: 00105555
|
Wanted Big Block Chevy Engines and Parts
Wanted, Complete Engines, Blown up Engines, Blocks, Cylinder Heads, Hydraulic Roller cams, Crankshafts, Rods, Pistons, Hydraulic Roller Lifters, Oil Pans, Pushrods, Rocker Gear, ETC. all considered.
Factory or Aftermarket - will travel to you.
I can't work and I am Bored!!!
I want to build stuff. No Silly Prices Please.
Call or Text.
|
Contact: Paul
Country: United Kingdom
|
Email:
click here
Tel: 07831 650230
|
|
|
Date: 2/7/2021 3:51:39 AM
|
Ref: 00105553
|
Wanted: Used Pair of slicks
Wanted: Used Pair of slicks, for mock up only
33.5 x 16 x either 17 or 16.5 or 16 wide
Thanks in Advance!
|
Contact: Pike
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 1/22/2021 6:56:21 AM
|
Ref: 00105552
|
American Racing Torq Thrust Wheels wanted
American Racing Torq Thrust Wheels (polished) VN515
15 x 4
5 stud
4.5 or 4.75 bolt PCD
2 required
|
Contact: Paul
Country: United Kingdom
|
Email:
click here
Tel: 07767398628
|
|
|
Date: 12/20/2020 2:18:22 PM
|
Ref: 00105551
|
Wanted BBC pistons
Wanted BBC 454 +60 flat top pistons or dished for blower set up.
|
Contact: Mark
Country: United Kingdom
|
Email:
click here
Tel: 07803600037
|
|
|
Date: 11/29/2020 5:25:20 PM
|
Ref: 00105550
|
Various parts - 9 inch / Chevy / Pop
Wanted: -3.5 or 3.77 ring gear & pinion for 9 inch/ 35 spline
-Ford 9" bearings for 3.25" carrier / 35 spline pinion
-Posi / LSD unit for 35 spline shafts
-Small block chevy:
-Cam / lifters - what you got?
-Crank & or rods - what you got?
-High capacity sump
-Manual gearbox for chevy - preferably 4 speed - What you got?
-Ford Pop sit up n beg front wings @ standard width
|
Contact: Drew
Country: United Kingdom
|
Email:
click here
Tel: 07816390962
|
|
|
Date: 11/29/2020 5:21:34 PM
|
Ref: 00105549
|
Wanted: BBC Block
I'm looking for a BBC block 454 4 bolt mains with a standard deck height of 9.8 inches,Gen 4 and bore size of or smaller than 4.350 inches.
What is out there, I need one asap as the motor is needed to have motor plates and chassis work done.
E-mail or text please.
|
Contact: Anais
Country: United Kingdom
|
Email:
click here
Tel: 07462886609
|
|
|
Date: 10/3/2020 6:14:20 PM
|
Ref: 00105546
|
Wanted BBC 454 1973 rods and +30 pistons
Wanted BBC 454 1973 rods and +30 pistons
|
Contact: Michael
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 10/3/2020 3:00:18 PM
|
Ref: 00105545
|
Wanted 16” 8 lug pick up wheel/wheels
Wanted 16” 8 lug pick up wheel/wheels. NOT 16.5”
|
Contact: Steve
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 9/8/2020 6:34:38 PM
|
Ref: 00105544
|
Wanted Early Hemi exhaust rocker
Looking for one early Hemi 354 exhaust rocker.
|
Contact: Garry
Country: United Kingdom
|
Email:
click here
Tel: 07896468230
|
|
|
Date: 7/23/2020 8:58:47 AM
|
Ref: 00105543
|
Wanted Chevrolet c20 8 stud steel wheel 16”
Chevrolet c20 8 stud steel wheel 16”. Please e-mail.
|
Contact: Steve
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 5/14/2020 12:20:41 PM
|
Ref: 00105542
|
Parts wanted 454 Chevrolet
Wanted:
454 steel crank.
I beam rods.
McLeod or Lakewood steel bellhousing.
3 speed Chevrolet manual gearbox.
Alloy 168t flywheel.
Tall alloy valve covers.
MSD distributor.
|
Contact: Dave
Country: UK
|
Email:
click here
Tel: 07904115669
|
|
|
Date: 5/9/2020 7:17:52 AM
|
Ref: 00105541
|
Wanted - Centerline Autodrag Wheels
Wanted - pair of 3 1/2"x15" Centerline Autodrags. 5 x 4.75 Jag/Chevy pattern. Not looking for unilugs. Cash waiting.
|
Contact: Baz
Country: UK
|
Email:
click here
Tel: 07929-640692
|
|
|
Date: 5/7/2020 4:34:48 PM
|
Ref: 00105540
|
PARTS WANTED
--- Fire bottle system - Coldfire or similar (2 x 10lb bottles)
--- Blower bag to fit 8/71
--- A-Fuel scoop - carbon or fibreglass
|
Contact: Bennett Racing
Country: United Kingdom
|
Email:
click here
Tel:
|
|
|
Date: 2/23/2020 5:05:10 AM
|
Ref: 00105539
|
Hemi crankshaft wanted
WANTED-EARLY HEMI CRANKSHAFT NEEDED.301,331 OR 354 AND AT LEAST ONE CONROD.
|
Contact: Anthony
Country: UK
|
Email:
click here
Tel: 07828 107251
|
|
|
Date: 12/14/2019 4:19:36 AM
|
Ref: 00105538
|
2 speed powerglide wanted
wanted 2 speed powerglide to take 1000 HP preferably to fit a small block ford 6 bolt.
strange alloy front struts with brakes.
competition 4 link kit.
this is for a fresh chassis build car for Huxley Motorsport cando corrolla.
|
Contact: Marc
Country: UK
|
Email:
Tel: 07821295969
|
|
|
Date: 12/14/2019 4:04:07 AM
|
Ref: 00105537
|
Cam plug wanted
Anyone got a 2-1/2 cam plug kicking around, backorder with real steel, for rear of block 429/460
|
Contact: Dave
Country: UK
|
Email:
click here
Tel:
|
|
|
Date: 10/27/2019 11:28:53 AM
|
Ref: 00105536
|
B&M shifter wanted
B & M prostick shifter for 727 Torqueflight
|
Contact: Mike
Country: UK
|
Email:
Tel: 07932 645189
|
|
|
Date: 10/27/2019 11:26:07 AM
|
Ref: 00105535
|
Pontiac stuff wanted
Wanted Pontiac 400 Block
heads
cam rockers
cam covers
rods
pistons
cranks
used or new
|
Contact: Steve
Country: UK
|
Email:
click here
Tel:
|
|
|
Date: 10/27/2019 11:08:02 AM
|
Ref: 00105534
|
Various wanted
standard torque converter and flex plate to fit a small block chevy 153 tooth flex plate.
steering column/box to fit into a 1947 Chevrolet panel van/ pickup.
|
Contact: Brian
Country: UK
|
Email:
Tel: 07837985973
|
|
|
Date: 10/27/2019 10:59:21 AM
|
Ref: 00105533
|
Bellhousing wanted
I need a bellhousing to put behind a newly rebuilt motor on an engine stand to run the cam in etc, anything will do to as long as I can get a starter setup to work, knackered C6 etc.
|
Contact: Dave
Country: UK
|
Email:
click here
Tel:
|
|
|
Date: 10/27/2019 10:54:28 AM
|
Ref: 00105532
|
BBC wanted
Big block Chevy engine & gearbox required , mild to wild , will consider any spec.
|
Contact: Gary
Country: UK
|
Email:
click here
Tel: 07850 836 917
|
|
|
Date: 7/27/2019 4:04:31 AM
|
Ref: 00105531
|
Mallory mag coils wanted
I am looking for two Mallory mag black top coils phone number
|
Contact: Frank
Country: UK
|
Email:
Tel: 07932 354284
|
|
|
Date: 7/17/2019 4:29:14 PM
|
Ref: 00105530
|
Procharger wanted
I am looking for a F1 Series Procharger Clockwise Rotation to use with a gear drive.
|
Contact: Mark
Country: UK
|
Email:
Tel: 07836 715613
|
|
|
Date: 7/17/2019 2:18:28 AM
|
Ref: 00105529
|
Wanted Lenco Drive (Chrysler Pattern)
Wanted Lenco Drive (Chrysler Pattern)
Wanted 2 Speed Lenco (Would consider 3 Speed) with Reverser
|
Contact: Andy
Country: UK
|
Email:
Tel: 07860 405060
|
|
|
Date: 7/2/2019 2:56:42 AM
|
Ref: 00105528
|
Wheelie bars wanted
Looking for a set of wheelie bars to fit my 9" axle, anything considered.
|
Contact: Lee
Country:
|
Email:
click here
Tel:
|
|
|
Date: 7/1/2019 2:33:33 PM
|
Ref: 00105527
|
GM turbo hydro 350 transmission wanted
wanted GM turbo hydro 350 transmission
|
Contact: Brian
Country: UK
|
Email:
Tel: 07837 985973
|
|
No more advertisements in this category
|
|
