European Drag Racing Classified Advertisements

Cars
Cars for sale

Date: 1/30/2024 12:47:51 PM	Ref: 00017531
Malibu express Dragster And Trailer Roy Wilding Chrome Molly Chassis Data Logger Radio Connection to Crew Chief Simpson Duel Parachutes Electronic Gear Shift Powerglide 40 spline Strange Axles and Disc Brakes Brand New Engine and Spares Best quality Race Engine Parts Loads of Spares Engine: Running on Redline Oil Block New Century solid cast aluminum. 8 bolt mains on center 3 mains caps 4 bolt-on front and rear mains Crankshaft: Forged Callies Magnum XL Steel and polished all over Aluminum Forged Billet connecting Rods 2 sets 1 set never fitted. All Head Studs – New Century All other fixings are: Diamond Forges with Gugglet Pins, Nitro: Style extra Strong taper Bored Cylinder Heads: Made by Bronze Seats Company with ported and polished valves Titanium. Titanium Exhaust Rockers: Copper, solid CNC ported and polished solid head and exhaust gaskets Push rods – 7/16 o/d Cam : Speck max Life Lifters: ISKY Bushed Bronze Roller and running in bronze pressure feed intake rocker covers custom New Century Performance Endole Buzzard Fuel Injection Built By Jeff Morris Custom Built Trailer with the generator 240 VAC Lighting No Corners Cut The price for everything £67500
Contact: Jeff Morris Country: United Kingdom	Email: click here Tel: 07540685877

Date: 1/25/2024 12:46:02 PM	Ref: 00017529
Junior Dragster and Trailor Junior Stock Dragster and Trailer Hauser chassis powder coated back Body painted black Wing painted black and green Junior stock Methanol engine Aim mychron 3 data logger Comes with starter and a spare engine Ideal starter car for 8-11 year old Can be raced at Santa pod or Melbourne raceway Ran this weekend to make sure everything is ready for sale and the car ran well. Fired up first time Car located in Bolton. Can deliver for extra. Selling due to upgrade Price @ £2,500
Contact: Lee Opensaw Country: United Kingdom	Email: click here Tel: 07903398289

Date: 1/21/2024 3:19:16 PM	Ref: 00017528
1962 Supercharged black Chevy Nova 1962 Supercharged black Chevy Nova Big block ‘454’ methanol engine Spec: BDS blower: Enderle injection 16 volt electrics with charger B&M shifter & MSD controller Dart heads: JE pistons Melling oil pump: Oil pan heater Underfloor oil cooler Full Simpson 5 point harness Deist shoot & blower straps Comes with: Heavy-duty car cover and 125 ltr of methanol in sealed containers Car has run with Supercharged Outlaws for a number of seasons Price £17,750
Contact: Simon Cooper Country: United Kingdom	Email: click here Tel: 07876758761

Date: 1/6/2024 9:18:06 AM	Ref: 00017527
1939 Ford Coupe Gasser Steel body with reinforced original frame. Still in primer. Cage approved for 8.50. Straight front axle with Camaro disc brakes. 9” rear, Spool, 40 splines Moser axles, 4:56, disc brakes. Aftermarket shaft for TH trans. New rear tires. I drove the car with KB hemi methanol and PG transmission. Selling as a rolling chassis. Just add an engine with PG transmission and race this spring! Asking 16500 EUR / 14200 GBP
Contact: Mats Country: Sweden	Email: click here Tel: +46 70 325 1939

Date: 1/6/2024 8:44:04 AM	Ref: 00017526
Corvette C5 Roller 6.0 Sec. Chromoly Chassis 25.1K certified in August. Double Frame Rail to Midplate. 9" rear axle 4.11, 4-link, wishbone, Strange spindle mount struts and brakes. Setup for Chevy / Powerglide. Driveshaft incl. Front mount fuel cell. Some more stuff is available. The body is all fiberglass, a very light car. The car is in Germany near Lake Constance. For questions Email or WhatsApp £18,000
Contact: Manuel Country: Germany	Email: click here Tel: +491773422010

Date: 12/19/2023 6:59:22 AM	Ref: 00017525
1990 Chrysler Lebaron SD Racecar C/M Chassis tagged 25.1J 07/2023 Strange dual adjustable front struts, front/rear brakes 9.5" Ultra case rear-end 4.11:1 gears and a 5.15:1 with own pinion support and shim Koni/MSD elec./air rear coilovers, Weld Wheels splindle monunt front and 16x16 dual beadlock rear wheels , Hoosier tires Racepac Sportman Data Logger and Dash, Leash Electronics, Fire ext. system, Aluminium radiator, Front mount fuel cell with BG400 fuel pump Mounted Chute and Wheelie bars PG with JW Ultra Case Bell/case/tail/pan, straight cut 1,8:1 Alto clutches with band, Stigo valve body World iron block 572cid B1 engine 850+hp on pumpgas, , Billet Kellog crank, Scat 4340 rods, Diamond pistons 10.3:1 comp, Jesel belt drive and Distributer Bullet solid rollers, Crower lifters, Koffel B1 heads, Hoogan intake, Davinci carbs €17,000 Rolling shell without engine and transmisson €39,000 Complete
Contact: Mikael Skinnars Country: Finland	Email: click here Tel:

Date: 12/10/2023 11:38:28 AM	Ref: 00017523
9s 68 Camaro It's time to sell my late brother's 68 Camaro spaceframe drag car. This car was raced by Leroy and Bonnie Philson in the USA as 'Mighty Mouse' with some success. I have extensively rebuilt the car and engine with a new block bored and honed, painted the chassis, added a mid-mount plate and replaced all bushes, rod ends etc. It has quick-release doors, flip-front, and steel roof/rear fenders. Dana 60 rear diff, full caged tubular chassis, and Centreline wheels. The engine is a 468ci with NoS Fogger kit which runs 109RON fuel. Last outing the car did a mid 9s run from what I have been told. Price is negotiable For more info, call Donald on 07774 718492. Photos and more spec here: http://bit.ly/4abDe0u
Contact: Donald Country: United Kingdom	Email: click here Tel: 07774 718492

Date: 11/29/2023 8:55:54 AM	Ref: 00017522
Altered project for sale Due to unforeseen circumstances, I have to put my 2 long-term projects up for sale. Project 2 is a 125-inch wheelbase altered based on an S&W Race Cars TMFC blueprint. The front end has been changed for a Mark Williams FC torsion bar with a 5-inch drop front axle out in front. Chrome moly chassis from an S&W tubing kit with all the best new parts from S&W, M/W, Strange Engineering etc. I am still working on this car at present and about to fit the roll cage. This would be a great time to fit this to suit the new driver who could then have all the levers, pedals, steering column, etc made to suit exactly I have most parts here to finish this car including a "T" body and an Indycar rear wing from my TAD back in the day.. just drop in your blown Chevy! For more information phone Norm Wheeldon or Nigel Charman on 07901 580879
Contact: Norm Country: United Kingdom	Email: click here Tel: 07901 580879

Date: 11/29/2023 5:18:45 AM	Ref: 00017521
Nostalgia Funny Car project for sale Due to unforeseen circumstances, I have to put my 2 long-term projects up for sale... I am looking for a team or individuals to take two projects forward to completion as I had hoped to do..... Project 1 is a Nostalgia Funny Car: Victory Race Cars rolling chassis, 125/123-inch wheelbase Victory fabricated rear axle with Mark Williams floater hubs Fitted with M/W 9.5 third member with new gears and 40 spline spool. Chrome moly motorplate. The front has a pair of the most highly polished CentreLine spindle mounts you will ever see which are even polished on the inside and fitted with new M/T front runners. Pair of McKinney Race Cars fuel and oil tanks - a work of art and almost new. 71 Mustang body with a McKinney adjustable body mount kit. The aluminium work is still to be done but I have the escape hatch and front body latch kits from S&W. This is the same body as the Stone, Woods & Cook car from Elapsed Times magazine 2013 and Dennis Taylor's "Evil, Wicked, Mean and Nasty car and the Kazanjian, Lemon and Konno car amongst others seen at Bakersfield. Looking at the reaction to photos of the Time & Motion car on the internet, I see this being an instant crowd favourite. If you want to be a player at the top end of European Nostalgia Funny Car then this is where you need to start. Phone Norm Wheeldon or Nigel Charman on 07901 580879.
Contact: Norm Country: United Kingdom	Email: click here Tel:

Date: 11/22/2023 7:18:36 AM	Ref: 00017520
Rainycity Camaro For Sale Due to the loss of a friend/work colleague which will restrict race time we have decide to look for a new custodian of this multi championship/event winning car Ideal for a newcomer, younger driver who is looking for a low maintenance consistent car. 99 Z28 Camaro (bought new, UK spec car) No expense spared converting to race car As new 14000 gentle Klms, no rust, spotless underneath, couple of minor body marks I refuse to add up how much has gone into the car but its way more than the £24k new price in 99 (massive paperwork file) Runs mid 11's n/a, 10.6s on 100 shot Run Pro-Et or slow it down for Sportsman Basic Specs Ls1 346ci SLP modified heads, 1.75 LT headers Ls6 intake, Comp N20/na cam Upgraded pushrods ARP head studs SLP underdrive HB MSD coil packs Zex tuneable wet N2O kit Etc Etc Etc Brand new Edge all singing TH400, 3800 stall race convertor (4 passes} Auto or manual shift New 3" NWP prop Strange 12bolt rear 3.73 gears Full adjustable chromoly race suspension front and rear All BMR kit, K-member, A-arms, torque arm, sway bar etc etc (same spec as 8 sec cars in US) Adjustable QA1 front and rear coilovers Subframe connectors EBC brakes all round Full Wolf CDS chomoly cage fitted by John Sleath Tick performance battery relocation kit Bogart lightweight race wheels 26.5 x 10 x 15 M/T Pro-Bracket radials (plenty of runs left in them) EFi Live Tuning box with tunes. New high amp Powermaster alternator (not fitted yet) stock one is ok but not up to racing. Spare upgrade fuel pump Flaming River manual steering conversion kit (not fitted) Loads of other parts/spares Everything to put back to stock is available, interior, wheels heads/cam etc too much to list, stock electrics , lights etc all ok Brian James 4 wheel trailer also available email [email protected] or whatsapp for pics and any questions or better still be old school and ring me for a chat 07948376819, ignore my tears!! Price ?? looking for offers in region of what I paid for stock car, No p/ex's Thanks for Advert Al Platt
Contact: Al Country: United Kingdom	Email: click here Tel: 07948 376819

Date: 10/21/2023 6:59:06 AM	Ref: 00017518
1941 Tommy Mauney Willys 1941 Tommy Mauney Willy's Hairy glass carbon fibre body Custom Jeff Hoskins paint Spinworks front wheels M/T rear double bead locks 34.5 Hoosier tires Mark Williams third member Mark Williams aluminium floater rear housing Lamb carbon rear brakes Lamb carbon front brakes Lamb double adjustable front struts Koni ( special valve) pro mod rear shocks Dual Simpson chutes NOS dual bottle mounts Automotive fuel pump Digital 7msd MSD coil Titanium firewall Titanium driveshaft tunnel Serious enquiries only please Email for further information and price.
Contact: Rick Country: United Kingdom	Email: click here Tel:

Date: 10/10/2023 4:18:54 PM	Ref: 00017517
A/FUEL DRAGSTER This dragster has consistently run quicker and faster than any other A/Fuel car outside of the USA. Best ET 5.26 / 2 Quickest runs 277/279 mph Brad Hanson built chassis built for Dave Wilson in 2003 286” wheelbase (same as Bill Reichert). Rear Halved in 2007 for a/fuel Engine 39” out Formed seat / belts / stroud chutes / Mageira Wings front and rear Weld wheels and new Goodyear tyres Racepack Pro 11 with every option Trick Titanium Bellhousing Chrisman 10½ rear axle / new carbon brakes Rob Moore reverser (with neutral lockout) Bob Molinari titanium clutch and flywheel Brad Anderson Billet Block 4.375 bore Brad Anderson fathead 5 Cylinder Heads Manton rocker shafts Valesco crank 3.500 stroke Bill Miller rods Bill Miller wristpins J & E pistons Copperhead oil pan P&P duel wet sump oil pump Casele gear drive Stage V inlet BAE exhaust rocker arms Crane cam and lifters Manton push rods Electromotion timer and six shooter system Sitko duel mag drive MSD 44 promags Waterman ‘Lil Bertha’ fuel pump 48 gallon RCD front mount starter RCD battery pack and charger Turnkey £60,000.00
Contact: Dave Country: United Kingdom	Email: click here Tel:

Date: 10/6/2023 6:20:18 AM	Ref: 00017516
Pro Mod Plymouth Cuda 1971 Pro mod Plymouth Cuda model year 1971 Many updates, light car, titanium firewall. Sold as a roller with spare doors, nose and mould to make new. Options to sell with third member drive shaft, gearboxes, bellhousing, clutch, lots of spare parts for clutch and gearboxes. Even open to discussing selling with engine. Car went 5.81 and 250.85mph Contact Michel Tooren
Contact: Michel Country: Netherlands	Email: click here Tel: 0031 646400302

Date: 10/3/2023 2:56:12 PM	Ref: 00017515
1962 supercharged Chevy Nova big block 1962 Supercharged Black Chevy Nova Big block “454” Methanol Engine Spec: BDS Blower: Enderle Injection 16 volt electrics with charger B&M shifter & MSD Controller Dart Heads : JE Pistons Melting Oil Pump : Oil pan Heater And Underfloor Oil Cooler Full Simpson 5 point harness Deist Chute & Blower Straps (With 125ltrs Methanol In sealed containers) And heavy-duty car cover Car has run with the “SUPERCHARGED OUTLAWS” for a number of seasons. £17,750,00
Contact: Simon Country: United Kingdom	Email: click here Tel: 07876 758761

Date: 10/2/2023 12:50:50 PM	Ref: 00017514
Selling my Cortina £1 Per mile delivered from N21 to you one-way! Ford Cortina Mk3 Bakkie (pick-up). Rust free south african import. The rust is only paint, can sand off car is still white under the paint. Car has been built from the ground up here in the uk with no expense spared. Drives like a brand new car, it literally is a new car. Everything is tight and brand new. Car has covered 2300 dry miles since build. Run in and ready to go. Rose joints checked fortnightly and greased accordingly. The car was originally a 2.5 v6. Magazine featured (Street Machine) pre turbo. Genuine Cortina Mk3 pick up only made in South Africa and Australia Engine spec: Small block chevy 350, 4 bolt mains machined to plus 30thou (355ci) 5.8 litre v8 Brand new Holley 850 DP Sniper EFI system. Brand new Holley sniper digital MSD ignition system. Holley touch screen. Holley terminator. New VSRacing rollerball bearing turbo 4psi on the streets running low 11’s @ 15Psi at the strip should be in the 9’s Was running 12’s @ santa pod naturally aspirated 550+ Bhp @ 12psi wheel spinning on the dyno. Mapped by John Sleath Race Cars Ltd Doncaster. V8 & running gear conversion & chassis works by Monkey Boy Racing. Turbo conversion and ali/stainless welding by John Markou Racing london. Custom hand made aluminium oil and water catch tanks. Custom Mishimoto intercooler. ARP main stud kit top and bottom. Factory forged eagle steel crank. Speedmaster (1000hp rated) Eagle H Beam forged rods. Speedmaster(1000hp rated) Icon forged pistons. Canton drag sump. Comp cams custom solid roller cam. Howards solid roller lifters. Speedmaster 1.6 roller rockers. Speedmaster stud girdle. Magnum pushrods. Brodix 220cc alloy heads with arp head stud kit. Edelebrock Victor Jr intake manifold. Solid ali engine mounts. Gear box spec: TH400 auto, 10" 3500rpm high stall converter. TCI HD flex plate ARP bolts. B&M pro stick shifter. Propsharft Services HD race propshaft. Transmission cooler and fan. Exhaust: Full custom stainless system inc header manifolds. 3’’ System. Flow master rear box. Suspension: Front modified Cortina using Wishbech Engineering custom double wishbone arms. Front: 13’’ Alloy coilover shocks. Rear: Competition engineering 4 link with drag link 13’’ alloy coilover shocks. Brakes: Cortina servo master cylinder. Roll stop/line lock. Front: Wildwood alloy 4 pot caliper kit with 285mm vented disc inc stainless braided hoses. Rear: Curries enterprises ford 9’’ disc kit. Rear axle: Curries enterprises ford 9’’ axle, inc curries heavy duty 3rd member fitted with 4.11 gears and spool, lsd. Strange streets 33 spline drive shafts. Roll cage: Insane Creations sfi 8.50 tagged roll cage. Chassis: Modified Cortina chassis. Using 3mm plate steel to upgrade front engine motor mounts. Sleeved front crossmember mounts. Rear chassis notched and extra crossmembers added for strength with added 3mm steel plate and chrome molly round tube. All tied in to the roll cage. Fuel system: Bosch fuel pump. -8An black fittings with black -8 braided fuel lines. -6 Black return fuel lines to jez 10 gal fuel cell in pick up bed in cased with in the roll cage. Torques boost regulated fuel pressure reg. Wheels and tyres: Front Centerline 17x7 rev wheel fitted with Kumho 205x40,17" Rear Centerline 15x8.5 convo pro wheel with 275x60,15" Nitto drag radial tyre. New Mickey Thompson ss spare pair for rear (£700) Spare set of new front tyres too. Seats & belts: Jaz bucket seats. RSA race safety SFI approved 3’’ 5 point harness (black) Electrics: Brand new wiring front to back. ARC 1200 switch panel. Cortina stalk. Front suspension is Cortina based. Custom arms by: Wisbech Engineering using Austin Princess ball joints and Wisbech Engineering arms and bushes. Roll cage and chassis: By Ron Haslett at Insane Creations All invoices for all the parts listed and works carried out present including full v5 in my name. Viewings in North London welcome. Cash or bank transfer on collection preferred. Can arrange export please message location 4 a quote. Sensible offers considered upon viewing but I won't give it away. Will break for more than I'm asking but I don’t have the time, energy or heart to. You can't build the engine for the money im asking. This monster has cost thousands upon thousands to buy and build. Over £50k easy. It's a true one of a kind, I don’t think theres another Cortina bakkie like this in existence. This is a very very fast car not for the faint-hearted Sunday driver. I used this as my daily for a year when it was carburettor and it never failed me once. I’ve been using it every dry day since the efi turbo conversion too and it's amazing, no cold start issues, starts first push of the button no gas. Fuel economy isn’t too bad either for a 5.8 litre turbo v8, can do 20 miles to the gallon now! I drove the car back from John Sleath Racing Doncaster to London which took me over 4 hours without missing a beat. It is a very road usable race car. My neighbours hate me as will yours if you start it before 8. Historic vehicle so tax and mot exempt, ULEZ compliant lol. £160 Per year insurance with Carol Nash fully comprehensive with all modifications declared and guaranteed valuation. More photos and videos on request. £25000 Ono
Contact: Arestis Country: United Kingdom	Email: click here Tel: 07903 919252

Date: 9/25/2023 2:07:08 PM	Ref: 00017513
Red Mist Altered Chassis for sale Red Mist Altered Chassis for sale Comes as a complete rolling chassis, minus engine and transmission. Wired with Painless wiring harness Will accommodate any type of engine 9" Ford Rear Axle Fire suppression system Red Top battery CDS chassis with chrome molly roll cage. Has previously been tagged to 7.50 Fastest time this year (with current blown methanol sbc) 7.59 @ 172 mph
Contact: Allan Country: United Kingdom	Email: click here Tel: 07702 091071

Date: 9/25/2023 2:04:48 PM	Ref: 00017512
2004 Ford Lightning 2004 Ford Lightning 14k worth of PROMAR Thunder and Lightning race engine. (Ford54lightningengines.com) 2.6ltr Kenne Bell supercharger. Johnny Lightning plenum, Accufab throttle body and forced air induction kit. Dynatech headers, One-off stainless steel exhaust system by RS Fabrications with Dougs Headers electric cutouts. Set up by John Sleath, dyno'd at 510bhp at the rear wheels. (Lots more potential) Stifflers chassis brace, Stifflers long bar traction system and panhard. QA1 adjustable shocks. Painted in ST orange (needs attention) Road legal with some MOT. £19,000 ono
Contact: Paul Country: United Kingdom	Email: click here Tel: 07912 343917

Date: 9/17/2023 3:45:23 PM	Ref: 00017511
68 Hemi Cuda SS/AH 68 Hemi Cuda SS/AH for sale. Call for more info.
Contact: Urban Country: Sweden	Email: click here Tel: +46-703168329

Date: 9/5/2023 5:48:31 AM	Ref: 00017510
Buick Skylark 1972 coupe Buick Skylark 1972 coupe on sale on behalf of a friend. Imported from Scottsdale Arizona dry state in 2006. Comes with lots of paperwork ( genuine 8600 miles) Also comes with original Buick wheels. Now fitted with disc brakes ( old drums & hubs with car) It's all standard and original must be seen. Car has no rust, is up and running, starts, stops and steers as it should do. Price £12500 The car is on eBay with photos, car used to race at Shakey so would make a great nostalgia Superstock.
Contact: Brian Country: United Kingdom	Email: click here Tel: 07837 985973

Date: 9/3/2023 7:04:29 AM	Ref: 00017509
1982 Plymouth Horizon bodied alcohol funny car This is a Bob Meyer 125" wb black painted chrome molly chassis which is in pristine condition. Never wrecked and has all top components.Has a Chrisman 10.5 rear end with 4.29 ratio. Has chrome tri pod front end chromed, with strange anglia spindles. Wilwood brakes all around and a12 gal black anodized fuel tank with all remaining tin work black anodized done by Victory race cars in Hesperia California.Has SPE steering box with all rods and braces chromed. The seat has 36" from bottom of seat to underneath of cage and is 20.5 at shoulders with aluminum seat worked at shoulders for more room.Has data logger in cased in black anodized aluminum box. Has polished air bottle for Lenco .Has chrome molly tri pod 5' wheelie bar. 16'x16' Cragar double beadlocks with Goodyear 34.5 x16x16 on the rear and Weld Drag Lites on the front with Goodyear 24.0 x 5 x15 front runners . All polished. Has a fresh 518" 92 series TFX hemi, wet sump System One oil pump. Never windowed or welded on with a Littlefield 14/71 Hi Helix blower and a Gerardo polished aluminum bird catcher. Has a TAK blower bag and blower restraint.Stage 5 manifold with Walt Austin fuel heads and Smiley headers with top mounted EGTs. MSD 20 with a Enderle 110 fuel pump.Has Taylor diaper.All lines are braided stainless with blue and red fittings. Has CS1 3 speed with fine spline with 2.16 - 1.50 -1.44 ratio and air pods. Has DJ blanket . Trick Titanium 8 5/8 clutch can 10" Titan 3 disc glide clutch Black anodized Lenco drive shaft cover Has a glass 1982 Plymouth Horizon body, that is 125" wb and is period correct.Could not find a more period correct as well as pristine body.Escape hatch as well as burst panel .Made by friend and my self. Has chrome molly trees with back anodized tin work and Lexan windows done by Victory race cars in Hesperia Ca.Has mounting for two chutes as well as black anodized aluminum air foil on rear for down force. This car is pristine all the way around and conservatively runs 6.30 in the quarter and 4.07 in the eighth.Fun car as well as a conversation piece. Sell running or rolling,your choice. This car is located in North Texas and is all fresh. Pictures: search "Charles Ware Funny Car"
Contact: Charles Country: USA	Email: click here Tel:

Date: 8/20/2023 11:15:51 AM	Ref: 00017508
NHRA National Event Winning Stock Eliminator Car 1973 Plymouth Duster 340cu in Low Compression Small Block by Brad Van Lant Event Champion Sonoma Nationals Event RunnerUp Las Vegas Nationals Numerous victories in other categories Car built from bare sheet metal by Phil Mandella at PMR Race Cars Motor and trans are fresh builds with less than 50 runs Protrans 904 will all billet internals 8.75” Mopar Rear Housing 5.13 Pro gears 4 wheel Lamb Brakes Racepak Sportsman SD Card Data Recorder MSD Digital 7 Ignition Custom aluminum radiator Meziere Electric Water Pump Tri-Y Headers by Greg Holman Chuckie Bar system Weld wheels all around on Mickey Thompson tires Custom Aluminum Fuel Cell by PMR Product Engineering Double FuelPump/Filter Combo Product Engineering Regulator Custom Upholstered Interior Performance Products Shifter with Clean Neutral Thermoquad Carb by Brad Van Lant ATI 8” Converter Perfect body with custom two tone nostalgia paint scheme Full Chrome Moly Rollcage Runs NHRA E/F/GSA at 1.10 seconds under index $65,000 US Dollars Located in Bakersfield, California E-MAIL FOR PHOTOS
Contact: Mark Country: USA	Email: click here Tel: +1 909 438 1345

Date: 8/19/2023 5:34:22 PM	Ref: 00017507
Hayabusa engined dragster Newly built in 2022 rear-engined 180-inch wheelbase dragster (rolling) tagged to 8.5 seconds with new 17-inch Weld Magnum front runners and 15-inch Keizer rear wheels with 26 x 10.5 Hoosier tyres, fitted JKE prepared Hayabusa engine with new billet MTC gen 2 clutch and billet quick access cover, Jaz 1 gal fuel cell. Will fit virtually any size driver £12,995 Does require some bodywork, electrics and plumbing to finish but comes with an electronic dashboard, nosecone, windscreen, MPI steering wheel, pour in seat, fuel pump, regulator, filter, standard Hayabusa loom and MSD launchmaster with associated loom. All parts cost way more than the asking price! May break if sufficient interest but prefer to sell as a package. Can sell complete with 16 month old twin axle box trailer with crew door built by Hedley Towbars that has 200 miles only. 18ft long x 5ft wide and 5ft height with lighting and power sockets £5,995 May consider part exchange. Can be viewed at Williams Bros Racing or can take to Santa Pod
Contact: Michael Country: United Kingdom	Email: click here Tel: 07881 225215

Date: 8/9/2023 3:09:52 PM	Ref: 00017505
Jr Stock / Modified Dragster Dragster runs in both modified and currently set up in stock. Comes with a low hour modified l206 engine with uprated crank, rod, coil de-restricted, new clutch and final drive, loads of spares including modified McGee methanol engine stripped down needing new rod and piston, an electric starter for methanol engine, digital tach and temp weight bars and tanks, Cage fully painted and body wrapped. Search Meka-Jo Gadney Motorsport. Location South London Priced to sell 4k ono
Contact: Chris Country: United Kingdom	Email: click here Tel: 07545 116875

Date: 7/31/2023 5:54:18 AM	Ref: 00017504
Orange Pop for sale Seller;Michelle Mockford Ford Popular 1950s Derby Sold as a roller Roll cage certified to 7.50 Window net Ford 9 inch rear axle Wisbech front clip Weld wheels all round Bucket seats Jazz fuel cell Parachute Offers around £18,000 We are also a member of Unusual Cars Sales UK on Facebook and the Orange Pop is on there.
Contact: Simon Country: United Kingdom	Email: click here Tel: 07950 271044

Date: 7/24/2023 4:48:04 AM	Ref: 00017502
10.2 chrome moly chassis built by SPITZER Race cars - tagged to 6.0 125" wheelbase. Spitzer fabricated rear. Aluminium 3rd member - 4:11 gears 35 spline shafts and spool Chrome moly prop guard Rear disc brakes New aluminium puke tank New aluminium fuel tank Bbc motor plate DJ safety fire bottles and system plumbed Front and rear wings Bantam altered body only weighs 20lbs Loads not listed - please ask questions. Various packages are available as a roller (body, tinwork, tanks etc etc) £13k (enquire for details). Wasted sitting here!
Contact: Luke Bennett Country: United Kingdom	Email: click here Tel:

Date: 7/17/2023 7:59:31 AM	Ref: 00017501
1980 2-door Chevrolet Malibu 1980 2-door Chevrolet Malibu drag race car Car is located in Spain! Freshly built 572 high compression engine, has a few dyno runs and 2 test runs on track, estimated 900 HP. Car weighs 3000 Lbs, well balanced with ladder bar and goes straight at launch. All electrics updated, new fuel tank, Magna fuel pump, 9 inch Ford differential with 40 spline Strange differential 4.56 ratio, strengthened TH 400 3 speed gear box with solenoid (for 1000 + HP) and electric transbrake, 40 spline Strange axles. Engine can run on 102 octane gas (or higher). Crank trigger MSD, double 1250 cfm carbs Quickfuel. Willwood front brakes, rear drums from 1/2 ton truck assembly. Linelock at rear brakes for burnout, Hooker headers with open exhaust. 6 point safety belt. Steel cage. Wheelie bar. Car should be able to run 9 seconds in the 1/4 mile. Engine built sheet available. Car is ready to run, but can be sold as a roller without engine and transmission too. Asking price 29.500 euros or make me a decent offer please.
Contact: Ibo Country: Spain	Email: click here Tel:

Date: 7/4/2023 5:51:10 PM	Ref: 00017500
1963 Oldsmobile Cutlass F85 2 door coupe + 427 sbc 427 SBC motor specs Dynoed at 610hp (flywheel) Dart SHP block (4.125 x 4.00 stroke) 4 bolt mains - splayed caps 10.5:1 compression Scat 4340 Fully Forged Steel crank, 4.00 stroke. 6 inch SCAT COMPETITION SERIES rods with ARP cap screws. Probe forged pistons - good up to 800hp Howards hydraulic roller cam PART # -189995-10 Valve lift with 1.6 rockers =lift = int .640 / ext .620 Duration in degrees: advertised - int 300 / ext 506 Duration @0.050": int 253/ ext 258 Lobe separation angle: 110º Scorpion Endurance series 1.6 ratio roller rockers with 7/16 ARP rocker studs. Howards lightweight premium .080 wall pushrods Dart Platinum Pro 1 heads 230cc heads, 64cc combustion chambers, 2.08/1.60 valves Felpro MLS head gaskets Weiand Team G open inlet manifold, port matched to Felpro gaskets Holley 750 vac secondaries carb currently fitted, but comes with 850 (4150) race prepped (by Jeff Bull) double pumper Holley 140 GPH Black Electric Fuel Pump with regulator (also included Holley red pump and separate tank / Nitrous bottle holder and fogger plate (not installed) MSD Pro-Billet w/Vacuum Advance Part 8361 MSD digital 6 ignition box 8.5mm Super Conductor Spark Plug Wires Electric water pump 1 3/4” custom headers into 3” exhausts c/w balance pipe. 3” Flowmaster oval silencers Powerglide transmission with transbrake 5000 stall converter Ford 9” axle 4:11 gears with Strange shafts. (built by John Sleath) Centerline 3.5”x15 front and 10”x 15 rears Bodywork is generally in excellent condition. Some slight bubbling to the base of the rear right roof post and peeling chrome to the rear bumper. Some rust on the front bumper. (pics available) Speedo showing 68k+ miles. Motor, trans, and axle have done about 1000 miles since build and around 7 or 8 ¼ mile runs, but only driven off the line (due to line-lock unable to work – now fixed). V5 in my name £19,500
Contact: Chris Country: United Kingdom	Email: click here Tel: 07890 944995

Date: 5/16/2023 2:15:37 PM	Ref: 00017498
1966 Dodge Coronet VAM 616D 1966 Dodge Coronet. Original 440ci (7.2ltr) V8 Chrysler (500hp) with a 3-speed Torqueflite 727 transmission, Power drum brakes all around and P.A.S. The engine has been fitted with some tuning parts like a new “Headman Header” Exhaust System a new “Demon” Race 4-Barrel Carb and an alloy radiator. The bodywork is in its ALL Original brown patina paintwork complete with some dents that have occurred in the last 57 years of its life. Complete with alloy spoked wheels, there is No rot on this car, just surface rust in places. This car has a Lot of Character for a car that’s 57 years old. The car was valued last year at £25k by Rick Ster of UK Mopars. I’m asking £23,500 o.n.o. for a quick sale. Steve on 07964151552. Email me for photos at [email protected] Collection from Lye, Nr Stourbridge, West Midlands. DY9 8NY, ENGLAND.
Contact: Steve Country: United Kingdom	Email: click here Tel: 07964 151552

Date: 5/16/2023 11:19:15 AM	Ref: 00017497
Dave Wilson Racing TMD Racing Operation A/FUEL DRAGSTER This dragster has consistently run quicker and faster than any other A/Fuel car outside of the USA. Best ET 5.26 / 2 Quickest runs 277/279 mph Brad Hanson built chassis built for Dave Wilson in 2003 286” wheelbase (same as Bill Reichert). Rear Halved in 2007 for a/fuel Engine 39” out Formed seat / belts / stroud chutes / Mageira Wings front and rear Weld wheels and new Goodyear tyres Racepack Pro 11 with every option Trick Titanium Bellhousing Chrisman 10½ rear axle / new carbon brakes Rob Moore reverser (with neutral lockout) Bob Molinari titanium clutch and flywheel Brad Anderson Billet Block 4.375 bore Brad Anderson fathead 5 Cylinder Heads Manton rocker shafts Valesco crank 3.500 stroke Bill Miller rods Bill Miller wristpins J & E pistons Copperhead oil pan P&P duel wet sump oil pump Casele gear drive Stage V inlet BAE exhaust rocker arms Crane cam and lifters Manton push rods Electromotion timer and six shooter system Sitko duel mag drive MSD 44 promags Waterman ‘Lil Bertha’ fuel pump 48 gallon RCD front mount starter RCD battery pack and charger Turnkey £60,000.00 Also available: TRANSPORTER 40ft Crane Frauhof Race Trailer Scania 320 unit, ready for test then ready to go Built and outfitted specifically to transport and maintain this car Complete with 9kva generator, hydrovane compressor, toilet, shower, kitchen, sleeping accommodation, fridge/freezer Pit flooring and all-weather awning for complete pit space Pit tables, catering tables, seats All complete but parked for five years and in need of a little tlc. £20,000.00 or offers SPARE SHORT MOTOR BAE billet block 4.375 bore Valesco crank 3.500 stroke JE pistons Crane Cam and lifters Keith Black gear drive ATI balancer and hub Sitco dual mag drive P&P oil pump Moroso oil pan £10,000.00 ono SPARES 2 sets of BAE fat head 5 cylinder heads built and complete with valves, springs, retainers, etc, down nozzles and lines – all CC’d and ready to run 1 set of American racing wheels complete with Goodyear tyres 1 set of Centreline wheels with Goodyear tyres 180 clutch plates 130 floaters All the above faced and ground, hardness tested 1 RCD starter 1 RCD battery and charger 70 intake valves 80 exhaust valves 30 JE pistons 2 trays upper rod bearings 2 trays lower rod bearings 1 tray lower main bearings 1 set main bearings 2 sets spare lifters (used) 20 spare Manton push rods 50 oil rings 2 sets of second rings 2 sets of top rings 500 spark plugs Spare Racepack cables (for most sensors) Laptop for Racepack Laptop for weather information (Davenport Program) 26 assorted head gaskets 2 MSD ignition boxes 2 MSD coils 2 MSD Pro Mag Caps 1 set Motorola radios 1 Intercomp digital tyre pressure gauge Knut carbon 3 element TOP FUEL rear wing £8,000.00 ono TOOLS Laptop for Racepack Laptop for weather information (Davenport Program) Clutch grinder Hardness tester 700lb Torque Wrench 250lb Torque Wrench MTI valve spring compressor On head valve spring remover ex&in Bottom end service kit Clutch service kit BAE main bearing remover Sleeve remover Balancer and hub remover Wheel balancer Sunnen Cyl Hone £5,000.00 ono TOTAL AND COMPLETE OPERATION TURNKEY £95,000.00 All serious offers considered
Contact: Dave Country: United Kingdom	Email: click here Tel: 07768 205350

Date: 5/15/2023 10:20:58 AM	Ref: 00017496
1969 Pontiac Lemans 1969 Pontiac Lemans Chrome bumper model Not GTO clone 454 big block Chevy crate motor Edelbrock inlet & 4 barrel carb Crane cam, Hooker headers, new lightweight starter, engine has less than 500 miles on it TH400 box, TCI shift kit, New 2600 stall converter 9" Ford rear axle, Yucon shafts, New diff & bearings by Hauser New brake servo & master cylinder New steering box and linkages inc idler arms and ends Centerline wheels, Micky T's rear Goodyear fronts Light weight bucket seats, new covers & new harnesses 4 new headlamp units Fuel cell & battery box on boot 4 point cage All hard work done, interior is stripped and body needs tlc and paint All parts that are noted as new have been fitted within the last 3 years and have covered less than 500 miles Good all round quick noisy fun car Located in Bedforshire not far from Santa Pod £16,995 ono
Contact: Gary Country: United Kingdom	Email: click here Tel: 07824 826 405

Date: 5/15/2023 3:32:01 AM	Ref: 00017495
Honda Prelude - Pro ET/Super Gas car Honda Prelude for sale with SBC 434, full tube chassis, right hand drive. The car was owned by Trevor Graves. Now located in Germany. It´s a full tube Chassis 8.50 cert. Ford 9“ Rear End Steve Schmidt SBC 434 running on gasoline Powerglide Transmission - all parts are new in March 2023 - zero Runs on it! CO2 Shifter Datamaxx Dash and Recording SFI up to date It´s the perfect car for Pro ET and Super Gas 20,500 € obo Contact: [email protected] Located in Bavaria, Germany
Contact: Til Country: Germany	Email: click here Tel: +44 46 176 1130 0814

Date: 5/12/2023 12:51:28 PM	Ref: 00017494
"The Borgward" After the decision to stop racing, the whole operation is for sale. 1954 Borgward Isabella Pro Mod car with Hemi. Chassis: 25.1 / 6.0 certified, 113" wheelbase, built by AJE Motorsports/Denver in 2004, updated 2008 and 2014. Strange front struts and brakes Fabed sheet metal rear housing with M/W center, full floater with 40 spline M/W axels, 4.56 M/W gears, M/W brakes, Koni shocks 16 x16 Centerline Beadlocks with Hoosier 17x34.5 slicks, 102" wheelie bar Font and midplate for Hemi DJ Saftey dual chutes with air launchers and electrical release Quick Data recording system with Laptop and manual Body: 1954 Borgward Isabella, top chopped 3", body is steel, with original roof and doors Flipfront is fiberglass (car comes with the mold for the Flipfront) Two seats for large or small driver Engine: KB Hemi Stage VI, B/S 4.310/4.375, Velasco crank, GRP rods, Arias pistons, BAE fuel heads, STAGE V rockers, Titan valves, BAE intake, 3" setback plate, 14/71 Mooneyham blower, B&U Injector, K-style barrel valve Transmission: Quick Drive converter transmission with 3-speed Lenco CS1, airshifter, new converter, M/W driveshaft Car comes with spare engine had to pan, spare Lenco, lots of parts (rods, pistons, bearings, gasket, etc.) Pro Jack stands, new slicks Goodyear 17 x34.5. See the Isabella on youtube "Borgward Dragster" for more info email to [email protected] Car is located near München/Bavaria Will not split, 60.000 Euro, ono
Contact: Anne Country: Germany	Email: click here Tel:

Date: 4/10/2023 1:09:26 PM	Ref: 00017493
Ex Stevie Saunders Ford Zephyr drag car THIS IS NOT A ROLLER Included in the sale: Zephyr body and chassis Strange rear axle case with strange 40spline shafts and brakes (discs and callipers) all brand new bar the callipers there’s probably £4k there but NO 3RD MEMBER Brand new wishbone / aframe just cost me £670 A pair of 17x16 converse pros double bead lock wheels Kirkey race seat All-new black Dzus Brake master New rear panel and seals Still to finish the bulkhead and some brackets Lexan to do all windows *All the moulds plus scoop bonnet boot and wings and some under trays. This is a project and it’s had 2years of my life please no more messers….. I have lots of photos and I’m happy to be as open and honest about what needs to be done. Photos can be see on my Facebook or Instagram @ lairymilk_zephyr_dragracing £5500ono
Contact: Nathan Country: United Kingdom	Email: click here Tel: 07943 367414

Date: 3/27/2023 9:32:56 AM	Ref: 00017491
1968 Chevrolet Camaro drag car 1968 Chevrolet Camaro drag car Street legal, big block nitrous, really quick car, runs high 8s. Scott Shafiroff racing engine, Rossler th400 auto Fibreglass bonnet, doors, boot lid, still have steel doors for car Strange rear axle 9 inch Andy Robinson tag, roll cage 2020 Ladders rear end Trans cooler New drag race seat belts No time wasters please!
Contact: Michael Country: United Kingdom	Email: click here Tel: 07826 060522

Date: 3/19/2023 6:00:34 AM	Ref: 00017490
55 Bel Air Funny Car Rolling Bel Air funny car complete, only needs engine and trans. Fits a driver 187cm 90kg Asking 21000€ or best offer
Contact: Sandro Country: Belgium	Email: click here Tel: 003211573838

Date: 3/15/2023 10:04:26 AM	Ref: 00017489
1956 Ford F100 So-Cal SuperGas Pickup No expense has been spared on this Ford pickup which previously ran consistent low 9’s in Super Gas. Now has had a larger crate 572 motor installed which runs on straight unleaded pump gas. All work completed by Robinson Race Cars, Jeff Bull, and Andy Frost. This engine has only 2 miles of use at a couple of car shows and a dyno sheet for Blueprint Engines showing 731hp and 721lbft. See links for further detailed information and videos when running at Santa Pod. This truck is available complete or the engine and box may be sold separately. https://ibb.co/hYNTdDT https://ibb.co/3FzxGVn https://ibb.co/N1sTL6s https://ibb.co/7yG8003 https://ibb.co/Cw30hYG https://youtu.be/g4DhUBW6d2E Open to offers.
Contact: Finney Country: United Kingdom	Email: Tel: 07748 204560

Date: 3/13/2023 7:05:34 AM	Ref: 00017488
Fiat Topolino Altered – 1961 NHRA D/Alt record holder Real Deal American 1950s built race car – un-debuted since restoration * Original steel body in very good order and nice paint – the doors open and close great on factory hinges / latches and the bonnet opens / closes. * 59A Flathead – Full Race 3 3/8” bore – Litteria cam, Jahn pistons, Weiand Full Race (FR) heads, Weiand tri carb intake topped with 3 Stromberg 97 carbs. Runs with great oil pressure, although requires a tune-up. * Original ‘50s built chassis – unaltered from it’s last race in ’67, although it has been blasted and painted * 39 Lincoln transmission / narrowed 40 Ford rear end * Original California Automotive Engineering Front axle * Original Chassis Research Lever Arm Shock absorbers – Refurbished * Original Halibrand 12 spoke magnesium wheels on the front and Halibrand Kidney beans magnesium wheels on the back * Original purpose-built trailer – made in ’59. No suspension, no brakes. These were men’s men. This is the real deal. A relic of drag racing’s golden era. A regular race winner, NHRA record holder and 1962 Popular Hot Rodding magazine feature car . I have lots of paperwork, including pictures from all stages of it’s life, some clippings of newspaper articles from it’s time running, copies of the magazine. It runs, drives and stops – although it could to with a tune-up as it runs a bit ‘fluffy’ Please note this is built to the safety standards of the time. I have no doubt that you could make it ok to run at the expected speeds of the engine without messing with it too much. I’m 6ft 2 and have to fold myself like a pretzel to fit into it. This could be remedied by cutting one tube out and fitting a new tube with a bend backwards so the seat can move back. However I didn’t want to do this. £13500
Contact: Drew Country: United Kingdom	Email: click here Tel: 07816 390962

Date: 3/12/2023 7:10:36 AM	Ref: 00017487
Nostalgia FC Chassis and Body Nostalgia Funny Car Chassis / Altered Chassis (not rolling - most ancillary parts are being retained for a new altered build). Norm Wheeldon / Andy Robinson Race Cars Chassis work. (Previously tagged for Nostalgia Nitro FC - will need re-certifying but good for 5.5 seconds) In excellent condition with some lovely design features. Pics of the car on www.bubblegumracing.com Complete Mk1 Capri funny car body, painted bright red with black roof and name and sponsor stickers applied (easy to re-sticker up without paint). Tree’d and tinned out to fit the above chassis. Spare front screen. The shell was a completely original build, crafted from our own bespoke mould. We made two shells, the first of which was a bit too heavy, never used on track and was recently sold to become a Cackle car in Scandinavia. The second shell was the one we tree’d out, tinned and raced with and is now available for sale with the chassis. Ideally they make a great pairing so would like to sell them as one. There may be some extra bits and pieces available for sale separately once the car is sold such as the carbon fibre seat, fuel tank, Beadlock wheels and more pending further discussion. A truly unique proposition - £10,000 firm. Currently located in Somerset. Specific detail pics available on request.
Contact: Matt Country: United Kingdom	Email: click here Tel: 07939 543254

Date: 3/5/2023 3:33:35 PM	Ref: 00017485
Joe Kellett’s Chrome-Worx Ultra Cars dragster roller For sale Joe Kellett’s Chrome-Worx Ultra Cars dragster Rolling chassis/body recently repainted in pearlescent purple and white 240” wheelbase Carbon fibre mono strut wing American racing track star wheels Swing arm suspension with new AFCO double adjustable shocker New gears in axle Stunning car with all trick bits including Goza superfly steering wheel Excellent Super Pro/Super Comp car Price £25000
Contact: Pete Country: United Kingdom	Email: click here Tel: 07773288597

Date: 3/4/2023 7:18:19 AM	Ref: 00017484
1960 Blitzkrieg Ford Falcon 400ci small block Chevy Completely refreshed New rods New pistons New rings New bearings Built by ice race engines Dedenbear power glide Refreshed and new sfi tag Super gas championship winning car 2019 Multi event winning car Chassis tagged to 8.50 Race ready Ideal car for super gas/super comp/pro et Car also comes with logbook so could go back on the street Please call for full spec 07761810646 £35k
Contact: Simon Country: United Kingdom	Email: click here Tel: 07761 810646

Date: 2/19/2023 5:11:35 AM	Ref: 00017482
BAD BLOOD FOR SALE! Laura’s fabulous Super Pro dragster, Bad Blood, is up for sale immediately as is our American ‘Pace /Cargo’ fitted out, twenty foot, four wheel race trailer. The trailer cannot go until the dragster sells though. The dragster is a chrome moly USA hard-tail chassis that splits in two for easy transport and storage and tech approved, it is tagged down to six seconds. It has a Racecraft mono-wing from the USA. Ford 9” rear end with Strange centre and shafts, Weld 16” beadlocks with Wilwood brakes (recent pads) mated to a full race SFI powerglide (just refreshed) with trans brake, cooler and race convertor. Engine is a 555ci Reher Morrison Super big block chevy, 1000hp, injected on methanol (Rons) with billet Kinsler fuel pump and MSD ignition topped with a modern snorkel scoop. Body is all aluminium , 2 pack satin black with fantastic hand brushed artwork by the late Simon ‘Nefarious’ Pollock. Front mounted fuel cell. Luxury interior is fully upholstered, brand new six point harness, carbon dash, billet steering wheel, glove box, pearl bass drum pedal for throttle, how rock and roll is that! Front wheels are Weld with a billet steering damper. Car always hooks up, runs straight, and has always qualified near the top of the huge super pro field. Lots of photos and videos all over the internet and I can send full specs by messenger or email. The car is available turnkey, as a roller, as a roller with trans. All with spares. Trailer is also available. I would take a good open trailer in part exchange for my enclosed trailer. £25k turn key, £20k complete but motor needs assembling, £17k everything bar the motor inc fresh racing trans and convertor. £8k trailer (but only after car sells or with car) great 2 part dragster! All based in Nottingham, England.
Contact: Ian Country: United Kingdom	Email: click here Tel:

Date: 2/7/2023 10:13:43 AM	Ref: 00017481
65 Nova Pro-Street, Chrome molly chassis 25.1/6.0 certified 427 Smallblock Gen.1 Metanol All the good stuff Jesel rockers Diamond pistons.. 2 x Precision 76 mm Easy 4.60 1/8 MS3-PRO Styring Wilson Power-Glide PTC split converter QA1 kulfiber driveaxle 9" Floater Axel Alu center-section 4.56 Komplet 330.000 dkr 45.000 euro Roller 140.000 dkr 19.000 euro
Contact: Henrik Country: Denmark	Email: click here Tel: +45 40259994

Date: 1/9/2023 10:33:32 AM	Ref: 00017479
For Sale - 10.2 chrome moly chassis built by SPITZER Race cars. 125" wheelbase. Spitzer fabricated rear. Aluminium 3rd member - 4:11 gears 35 spline shafts and spool Chrome moly prop guard Rear disc brakes New aluminium puke tank New aluminium fuel tank Bbc motor plate DJ safety fire bottles and system plumbed Front and rear wings Bantam altered body only weighs 20lbs Loads I am probably forgetting… please ask questions. Various packages are available as a roller (body, tinwork, tanks etc etc) £15k (enquire for details).
Contact: Luke Bennett Country: United Kingdom	Email: click here Tel:

Date: 1/4/2023 10:33:29 AM	Ref: 00017478
BMW 850i Pro Mod Chassis Beautiful looking ex- Sorbello's BMW 850i which ran mid 6’s in Australian AA/AP. The body shell was hand made from light weight body panels purchased from BMW motorsport. Twin rail chrome molly tube frame chassis with adjustable 4-link suspension (IHRA ProMod spec). Sold as a chassis/body roller with all new suspension/drivetrain parts (listed below). Can run in Top Doorslammer, Pro Mod, Top Sportsman, etc. Further details and links to videos https://www.my105.com/ (Search Pro Mod) Professional quality suspension and drivetrain parts (Strange Engineering, McDonald Bros, Wilwood, Weld): New Front Struts (springs and shocks) New Rear struts or Rear springs and shocks (coil over shocks) New Diff Housing New Diff center New Rear axles New Four link rear suspension (Heim joints and rods) New Front Brakes (rotors and calipers) New Rear Brakes (rotors and calipers) New Pedals and pedal box (throttle, brake) New Aluminum Drag Wheels Price: GBP 17,000 OBO
Contact: Mike Country: Australia	Email: click here Tel: +61-4039 94148

Date: 12/6/2022 5:15:19 AM	Ref: 00017477
Speedghost Motorsport nitro funny car chassis and body Price £23,000. Speedghost Motorsport is selling their fuel funny car chassis and body. The chassis will not have a rear end in it or rear wheels. The chassis and body is an ex Bob Bode car that raced in NHRA a few years ago. The chassis was certified in August 2021. Simpson belts in date to June 2024. Comes with clutch can, all titanium roll cage plates, cockpit panels, reverser tunnel, 4 Belly pans, fuel tank and oil tank. Complete fire bottle system(bottles are out of date). It will have titanium computer box mounted but it will not have any Racepak or Electromotion sensors or cables with the chassis. The body comes with 2 spare front windows and a spare burst panel. The chassis can come with coils, point boxes, 2 MSD Pro Mag boxes plus graphic editor but no cables for ignition system. We also have 2 sets of headers to go with the car. We also have blocks, cranks, camshafts and many other parts for sale for top fuel operation that can be put into the deal. The car has done 10 runs in Europe since leaving the USA For more details or questions contact Michael Mcdonald
Contact: Michael Country: United Kingdom	Email: Tel: 07706616961

Date: 11/6/2022 3:55:37 PM	Ref: 00017476
Ford Capri MK 1 Ford Capri MK 1, full chassis to SFI 25,4c (7.50), successfully run in Super Pro et with the car set to run 8.50. 598 tall deck single carb, driving a 2-speed Glide in SFI Reed cases with a 9" rear end. MSD ignition system and full Race Technology dash and data logger. Also fitted but never used is a 450hp Wilson Nitrous system with Leash controller and twin NX bottles. £30000
Contact: Austin Country: United Kingdom	Email: click here Tel: 07510 582968

Date: 10/27/2022 4:16:32 PM	Ref: 00017475
Ford Twin Turbo Mustang Built by Jerry Haas Racecars Pro Mod Top Sportsman Comp Eliminator Top Doorslammer. Full Carbon Fibre Body Carbon Fibre Interior 25.1 Chassis TRS New 6 point Harness 500ci Ford Hemi Twin 88 Precision Turbos Block Roberts Design 4.505” Sonny Bryant Crank BME Rods (10 runs) JE Pistons (2 sets) Custom Billet 2 piece pan 7 Stage Racingline Dry Sump Pump Bullet Racing Cam Crower Lifters 903 Severe Duty Manton Push Rods Jesel Rockers Ex Bob Glidden Ford Pro Stock Heads Victory Valves Intake 2.400” Manley Exhausts 1.800” Custom Fabricated Intake Manifold 8 X 8.50pph Billet Atomizer 3 Injectors freshly cleaned and checked with flow charts Stainless Steel Thermal wrapped Exhaust System Hutch Racing Transmission Super Duty Powerglide New 10 runs only Large diameter shafts Hutch modified turbo valve body and dump valves Hutch modified clutch packs etc Greg Slack 10” Bolt Together Torque Converter Browell Bellhousing Meziere Billet Flexplate All above certified and in date Mark Williams Drive Shaft 389 Richmond Pro Gear JHRC Fabricated Rear Axle Carbon fibre rear brakes Koni Shocks Weld Wheel Beadlocks Lamb Front Struts Lamb front brakes Steel rotas Goodyear front runners (new) Hoosier rears 17.0/34.5-16 (10 runs) Billet Aerospace Shifter Turbosmart 16volt Battery Fueltech FT 600 Complete system with sensors Car runs 629 @225 with 28lbs of boost and 20 degrees of timing. 2650lbs Pro Mod Legal with 150lbs of ballast. Serious enquiries only - check out Atkin Racing Facebook page for photos and videos Or call 07763122141 for more info. £72,000.00 GBP
Contact: Stan Country: United Kingdom	Email: click here Tel: 07763 122141

Date: 10/13/2022 3:44:55 PM	Ref: 00017474
PRICE REDUCED YET AGAIN THE SHOGUN MK1 FORD CAPRI Price:£14,750 Ono without Fueltech ignition system (open to offers), can be inspected at any time With much regret we are selling our car due to retirement from the sport, any more information required please don’t hesitate to message. Rolling chassis, ready for an engine and gearbox to be dropped straight in • 7.50 Tag • Brooke race exhaust system included (fender exit) • B&M Stick shift with solenoid shifter • Strange Front strut suspension (fully adjustable) • AFCO rear suspension (fully adjustable) • Strange front brakes • Strange half shafts • 199mph diff gears 363 • Strange SFI Prop-shaft • Aluminium rear section • TRS window net (fully in date) • 102inch wheelbase • launches hard @ 1.12 60ft • 7.68s @ Santa Pod • Wheelie bars • Wrapped in blue and primed underneath
Contact: Jack Country: United Kingdom	Email: click here Tel: 07802 669699

Date: 10/11/2022 3:48:14 PM	Ref: 00017473
1962 Chevy Nova 1962 4door Chevy ll “nova” 383 F1 Procharged Extensive spec, street/strip. Please get in contact for full specification of engine, transmission, car etc... 8point Wayne Allman 8:50 cage Full aftermarket 383, AFR cylinder heads, Little M block, F1 Pro charger, Andy frost 2speed power glide, Caltracs setup, 9inch with 3:55 gear, spool and strange half shafts, Full front clip with adjustable drag dampers,rack, Wishbones Etc, 15x4 Black anodised fronts and 15x8 Black anodised rears. Wilwood Calipers and discs all round. Aftermarket aluminium radiator, Lexan windows all round and front and back screens, Car weighs 2600lbs without driver. Two blower pulleys, 6psi and 12psi. Msd 6AL ignition and boost Control, Really solid car.... potential to be a 9 Second drive anywhere car. Please contact for a price and photos.
Contact: Dan Country: United Kingdom	Email: click here Tel: 07951 155313

Date: 9/20/2022 4:53:37 AM	Ref: 00017470
'69 Camaro less engine and trans 1969 Camaro, David Monday Race Cars. McAmis carbon body. Chrome Moly 22.1e single frame rail chassis. Beadlock wheels. Carbon interior and tubs. Tinwork for Lenco or Powerglide. Clutch pedal Racepak with Racepak dash. Very light car. Very clean and well looked after inside and out Complete car less engine and trans. £31k
Contact: Mick Country: United Kingdom	Email: click here Tel: 07399 015412

Date: 8/30/2022 1:57:11 PM	Ref: 00017469
Ford 100e Squire Drag race car . Box section rails with Brand new 8.50 tag roll cage with funny car cage around drive . Set up for sbc/bbc mated to power glide . Ford fully adjustable front coil over front strut set up . Fully adjustable rear four link . Ford 8 inch 28 spline rear axle with cut down 9-inch spool from Hauser race cars (both shafts snapped) . Ford 9 inch 35 spline fully floater axle strange centre section just need four link brackets moved to meet chassis rail set up . MSD 7al 2 with 3 step module and adjustable rpm modules . Full dash with all gauges brand new tach all auto meter . Full on boards mechanical fire system A lot more to list… for any info please contact me will sell as turnkey for the right money £15k Ono
Contact: Joshua Country: United Kingdom	Email: Tel: 07507 304756

Date: 8/23/2022 5:12:55 AM	Ref: 00017467
1941 Willys Coupe Wallace motorsport Willys coupe Pro mod spec Consistent 6-second car Selling Rolling 2005 advanced chassis Serious enquiries only Please message or call for more information
Contact: Bobby Country: United Kingdom	Email: Tel: 07900 188178

Date: 8/22/2022 5:18:57 PM	Ref: 00017466
1969 Chevelle Steel roof, doors & quarters 7.50 spec chassis Jeff bull 540ci Dart pro 1 heads World products block Transmission specialities transbrake power glide & converter (brand new) 9-inch ford axle 40 spline shafts Moser case, Mark Williams pinion support + yoke with 4.30 gears (brand new) Wilwood rear brakes K&r performance wiring loom + switch panel (new) Msd 7al3 digital (new) Msd hvc coil (new) Aeromotive 2000 pump + regulator (new) Power master alternator (new) Kirkey seat + cover (new) Wilwood master cylinders, Ali reservoirs and pipework (new) Strange front struts & brakes Afco double adjustable rear shocks Billet specialities wheels Hoosier tyres Lifeline built-in fire extinguisher Sadly for sale due to work & no time to race Needs a couple of days' work to be up and running. £30000 Viewing Bedford 25 mins from Santa Pod
Contact: Paul Country: United Kingdom	Email: click here Tel: 07913 891338

Date: 8/1/2022 11:02:20 AM	Ref: 00017465
Pro Mod 1941 Willys Coupe Pro Mod 1941 Willys coupe. Built by Tommy Mauney, Carbon fibre body, Lamb front struts, Titanium bulkhead and wheelie bars, Carbon brakes front&rear, The car is set up for a 5.3 bore space nitrous motor and turbo 400 But will except blown or turbo applications. The car is very light and has the best of everything. Serious buyers only please, Phone or email for price and more information
Contact: Rick Country: United Kingdom	Email: click here Tel: 07384 979 309

Date: 7/14/2022 7:34:44 AM	Ref: 00017464
Firecracker alcohol altered / NFC Complete racing set up, car, trailer Tools, fuel, oil, starter, pro jacks, spares. chassis fits large driver, I’m 6ft 3” and fit. 125” wheelbase, 6.0 chassis, Bead lock rear wheels M/T front wheels, brand new front runner tyres, fully floating 9” rear axle with strange engineering components, 4 wheel strange engineering braking system, strange steering box, butterfly steering wheel with air shifter knobs, twin parachutes, Chassis only has couple of runs on it. The motor is a stage 10 KB 426, Veney fuel heads, brand new Manley valves, locks retainers (best money can buy Titanium)stage 5 inlet and exhaust rockers, 14/71 JRF/SSI supercharger, billet starter mount/ belt guard, titan billet oil pump with system 1 oil filter. Brook2 Rods (large wrist pin) Fuel system has been flowed by Dave Wilson with the dyno sheets to help tune. Transmission is a 3-speed Lenco (air shifted) with Trick Titanium bellhousing, Titanium Crower pedal clutch. Loads of discs, floaters and Lenco gear sets Twin fire bottles Stainless headers Blower bag Blower restraints Buzzard catcher injector K style barrel valve (just been rebuilt ) Fuel pump with dyno sheet System 1 fuel filter RCD lightweight battery pack and starter motor all cables and chargers Engine diaper Tin work Oil puke tank Quick disconnect burn down tubes Pro jacks, no leaks ready to run Pat cuss fiat Topo body and barracuda funny car body Iq3i racepak dater logger/dash with laptop Sensors: Drive shaft speed RPM G force Fuel flow Fuel pressure Oil pressure Boost pressure Spare slicks (rear) Spare pistons Spare sleeves Spare piston rings Spare wrist pins Spare valves Spare valve springs, locks , retainers ,lash caps Spare spring shims Spare head gaskets (new) Spare push rods Spare spark plugs Spare jets Spare check valves Spare valve covers Spare rocker gear/ stands Spare dragster style headers Spare blower pulleys Spare crank pulleys Spare blower belts Spare fuel lines(new) Spare liquid-filled gauges Spare gaskets, bearing and most other consumables needed to run a car like this. Probably thousands of ££££ on spare aeroquip fittings , nuts , bolts , washers , studs… the list is endless. Trailer is a triAxle Brian James enclosed race car transporter mechanically sound but needs some cosmetic work to make it look 1st class. Heavy duty Race gazebo all black (rock awning) with sides Also small light duty awning for catering ect All electrical cables to run the electrics in trailer/car 1000w generator (barely used) Air compressor All tools to run car will be provided make: Mac tool / Snap On. 4x impact guns 3x Torque wrench’s 2x long 1/2 drive ratchets 2x Spanner sets 2 X Sockets sets 4x ratchets Screwdriver Hammers Slide hammer Mains puller RCD hub puller Aluminium fuel spanners On head spring pressure tester Leak down tester Loads of specialist tools to run car and prep car in workshop £55,000 firm Tons and tons of photos please ask for more if interested.
Contact: Adam Country: United Kingdom	Email: Tel: 07446 835820

Date: 7/5/2022 4:02:48 PM	Ref: 00017463
Phoenix Sylva drag racing car For sale 1991 first registered Sylva Phoenix kit car. Raced Goodwood and Brands Hatch more recently drag-raced Santa Pod. Comes with trailer but willing to sell separately. Was owned by mechanic and has been recently serviced. Asking price £8000. Located East Sussex.
Contact: Andrew Country: United Kingdom	Email: click here Tel: 07966 073626

Date: 6/26/2022 7:57:16 AM	Ref: 00017462
1962 Ford Comet Ranchero pick-up 1962 Ford Comet Ranchero pick-up. Needs work but a great project (it's all present inc log book) 2600 cc straight 6, manual gearbox. Quite a small car, about the size of a mk 1 Cortina. Selling for a friend. Been barn stored for years. Would make a nice father-son build. Inspection welcome. £6500 ONO.
Contact: Brian Country: United Kingdom	Email: click here Tel: 07837 985973

Date: 6/17/2022 5:34:39 AM	Ref: 00017460
1990 Chrysler Lebaron ex Pro Stock car 1990 Chrysler Lebaron Ex ProStock car 25.1G last certification done 2016 will try to get it recertified this year, seems like I will not have the time to race this car... Can be bought roller or turnkey, only need to get front end painted and it's about ready to race. - C/M chassis built by SD Racecars USA - steel roof/quarters - Weld wheels 16x16" dual beadlock rear - Strange dual adj. struts/brakes front - Koni electrical w/sweeps Koni/MSD module / Strange brakes rear - Strange 9.5" 3rd member 40 spline gun drilled axles, Prisma banjo 4,11 gears also 5,15 gears with own pinion support/shim - Lamb 4-link tubes - 3"steel driveshaft for PG, 4" Aluminum for Liberty - Fogmaker system - Dual Chutes - 12/16V battery - front fuel cell BG400 pump - Al.radiator - Leash electronics - MSD 7 Digital + coil - RacePack "sportman" V-net logger + dash - motor/midplates for BB Mopar and BB Chevy - Mopar BB / Glide in car now - the price depends on how its sold Any questions, more info or pics, send email!
Contact: Mike Country: Finland	Email: click here Tel:

Date: 6/8/2022 1:59:20 PM	Ref: 00017459
ALL STEEL 1941 Willys Coupe Well it is with a heavy heart the time has come in my life to part with my 1941 all Steel Willys coupe this car is known worldwide called Headhunter ( was blue) the body and chassis are sitting in my Garage awaiting someone to put it back together … The Hemi has been fitted by Chris Issacs but is now out the car , however, a BBC will go straight back in there as no modifications were made to the chassis to incorporate the 417 Donovan Formally ex-race car from CA Rat Infested The Coupe comes with Chassis built by Chris Issac Paint By Brian Whitfield Magnesium wheels genuine Culver City all round The 417 Hemi Donovan ( By Ice Racing Engines ) as many rare magnesium parts it’s totally rebuilt New Hilborn fuel injection 6-71 Believed to be a Donovan Pro built Powerglide Transmission specialists supplied by Jeff Bull transbrake reverse pattern and Ford 9 inch 4-11 and spool New Vertex Mag New Headers triple coated Camcoat Very Rare Donovan 417 valve covers Donovan timing cover Twin Chutes Wheelie Bars UK Registered Wired for the street There is so much I can write but if you know about steel Willys you know what they are worth Please serious enquiries only Tony 07468 560036 Will take a nice PX plus cash Hot Rod, Truck, this is not a cheap car and I am in no hurry to sell or am I making the right decision so if it doesn’t sell it stays with me having owned it now for nearly 20 years! £95k ... will split if money is right
Contact: Tony Country: United Kingdom	Email: click here Tel: 07468 560036

Date: 6/7/2022 7:43:05 AM	Ref: 00017458
1964 Ford Thunderbird for sale 1964 Ford Thunderbird, 2 door pillarless coup. 390 FE, 3-speed auto Full respray approx 11yrs ago, lovely interior, all electrics work. Original handbook, a few spares and a box of receipts from previous owners. Great car for those summer cruises. Tax exempt. £1495.00 ono
Contact: Andy Country: United Kingdom	Email: click here Tel: 01634 717370

Date: 5/13/2022 4:27:09 AM	Ref: 00017456
10.2 funny car / altered roller 10.2 chrome moly chassis built by SPITZER Race cars. 125" wheelbase Various packages are available as a roller (body, tinwork, tanks etc etc) £15k (enquire for details).
Contact: Bennett Racing Country: UK	Email: click here Tel:

Date: 5/13/2022 4:23:24 AM	Ref: 00017455
10.1e funny car/altered roller Steve Puleger chrome moly chassis. 10.1e (will recert with ease). 125" wheelbase. Suit Nostalgia funny car. 9" Ford rear end, Mark Williams billet 3rd member (40 spline spool). Various packages are available as a roller (tin work, tanks etc etc). Arrow straight chassis. £20k (enquire for details).
Contact: Bennett Racing Country: UK	Email: click here Tel:

Date: 4/14/2022 6:16:57 PM	Ref: 00017452
Very Rare Australian Ford Territory Import 4.0 Barra Falcon XR6 Australian Ford Territory Import 4.0 Barra Falcon XR6 - basically an SUV version of the XR6 Ford Falcon Probably one of the best production engines and chassis platforms that Ford has produced and it's from Australia! Certainly up there with the Ford Coyote V8 and some even remove them for a Barra swap... The SX Territory was the first Australian-built vehicle to be fitted with an electronic stability control system. In addition, Territory was the first SUV to have won the Australian Wheels Car of the Year award, in 2004. Super rare in the UK and Probably the only one over here and very few in Europe if any. I haven't seen or heard of another on this side of the world. There's also only a handful of Falcons in the country. This car was imported by an Australian family who emigrated to Ireland. I purchased it from Ireland and it's still on Irish plates with the Irish Logbook in my name. I have sorted the UK Nova Paperwork so it just needs an MOT then it's ready for registering which is easy to do. 94249KM Which is 58563 Miles Please note, I'm 100% not open to any negotiation in the asking price, it's a very cheap car considering it would cost you over £3000 on shipping/import fees alone to get one. Then buying a car with this mileage in AUS would not be cheap. Then with the extra parts you would be well over 10K! Very cool daily hack or would make a cool ET Drag car etc! I was looking to eventually build into a Street/Strip drag car, there are some crazy Territory Builds in Oz running 8/9 seconds over the 1/4 mile with full interior The Iconic Barra 4.0 Litre Engine/Gearbox package alone is worth a large sum, Last week I sold a bare engine for £2000 with the choice of who I wanted to sell it to, this is a complete running low mileage car with upgrades and extras! RWD Version - so a rather simple and relatively easy platform to work As people start to discover how good these engines actually are, they are becoming more & more popular across Europe and the United States in the Drifting/Drag/Racing Scene. A Company in Sweden has started manufacturing aftermarket parts for these and is making very high HP figures. American companies such as CP Carrillo / Manley are now also making parts for them. If you do some research you'll see these engines can produce around 500hp on stock internals with just Stiffer valve Springs,(you can buy a spring kit with an insertion tool) then there's a huge array of Aftermarket parts available to make up to the 2000HP figure, Have a quick search on YouTube to find out how special these engines are! Many great videos from Channels such as FullBoost, Street Machine, 1320Video, Adam LZ', It had a £1000+ set of Australian XYZ fully Adjustable Performance coil overs fitted which I imported from Oz due to one of the Stock Springs being snapped. Seemed a shame not to upgrade Aftermarket 19" team dynamic wheels believe they are 10J,(last fitted to an R34 skyline) with AD08 265/35/19 Road/track tyres. tyres cost around £800 I Imported a Falcon XR6 Turbo Manifold over which will be included, I also have a Genuine Garret XR6 turbo and a custom downpipe that I will include, I was planning on sending the turbo off to turbo dynamics to build a Hybrid turbo then run that for a while then upgrade later to my Bullseye turbo that I have spare and listed on eBay separately for £2200. The stock turbo was from an XR6 Turbo that was running 460hp, so you would expect a hybrid setup to be 500hp capable A New Bosch boost pressure sensor from an XR6T included New Bosch Turbo Fuel Reg included, so wouldn't take much effort to turbo it!, had new Superpro Rear upper trailing arms. New K&N Air filter element, new rear tailgate window fitted Auto Gearbox, also comes with a spare auto gearbox that was removed from a running Falcon I have put it through a dummy MOT to see the work it needed. The rear spring snapped - (so we replaced the stock suspension with a £1000 XYZ adjustable coilover set) The rear Screen was damaged when I purchased it - So a new one was bought and fitted Stock rear trailing arms worn - So upgraded to Superpro Rear Brake Discs worn - I have a good pair I picked up from a falcon Failed on a brake hose being too short, one is aftermarket and is now not the correct length since being lowered, for how much an aftermarket braided set costs I would just recommend you buy and replace all Failed on tail shaft center bearing - I have a new one in box with a new UJ . Easy Job just look on YouTube or the workshop manual I would recommend you check the ball joints, bushes etc. This is something I would do on any car of this age.... Needs drivers window electrics looking at, you can buy a complete unit cheap enough from Global Shipping on eBay Underside is solid Starts and sounds well, Moves fine, Brakes work. So Loading won't be an issue The Interior is in great shape! The only downfall is really the front of the headlining is sagging but this is common on these and falcons. Bodywork / Paint is good for the age, will need some small bits sorting to make it 'mint' the front of the Bonnet is probably the worse bit You could possibly drive this back on trade plates, but take in to account that I have only done 15 mile in it to the MOT Station and back Location - Swadlincote Derbyshire Price - £4500
Contact: Harry Country: United Kingdom	Email: click here Tel:

Date: 3/29/2022 10:49:46 AM	Ref: 00017448
JM/JMA Junior dragster - price reduced JM/JMA Junior dragster race ready The junior is a junior modified Dragster with a 375cc Baby Rhino engine and an Overdrive Shockwave clutch set up to run 8.90 but can do low 8 with the engine. This junior has a lot of history of drag racing and was imported from France in 2019. Selling as a junior modified for £3950 Ono For more information please message me
Contact: Chris Country: United Kingdom	Email: click here Tel:

Date: 3/29/2022 10:41:48 AM	Ref: 00017447
Top Methanol Dragster for sale 2011 Mike Boss TMD dragster Price reduced must go. Ex Rod Harrison 285" slip joint dragster. This car is current and I believe the newest TMD chassis in Europe. The car is less than 80 passes old. Carbon wings, the large cage will take up to 6'4 driver. Hemi motor plates. Ideal TMD SuPro or comp eliminator car. The car is minus wheels and axle and a few other bits, front wheels possibly available by negotiation. Please call or message for more details and pictures. Anyone looking for a dragster you will not find better for less. £5750 Contact David, located in the UK Detailed pictures available
Contact: David Country: United Kingdom	Email: click here Tel: 07816 522263

Date: 3/22/2022 8:14:08 AM	Ref: 00017446
Pro ET Duster Is anyone interested in buying the Duster? In a nutshell, it's an MSUK Legal, low 9 second car (ideal for Pro ET, Doorslammers etc - 9.31 pb), 540ci BBC with all the good stuff throughout, looking for £20k. Posting now to give someone the opportunity to get organised and racing at Easter! Full spec. and details available on request. Trailer and even the tow car are also available but will only be sold with or after the race car. I'm in no rush to sell so once the season starts I may even change my mind but right now you can take it away!
Contact: James Country: United Kingdom	Email: click here Tel:

Date: 2/13/2022 12:00:58 PM	Ref: 00017443
1969 Pro Street Camaro “Joyrider” for sale Impending retirement means I really need to look at thinning down my collection….. This started life in 1969 as a genuine Z28 DZ302 4 speed car, I have verbal confirmation of this from the first UK owner in 1973....... The car could be returned to Z28 spec if that’s your thing, I do have a suitable block, cross-ram intake and crank (at extra cost!) to build a 302…. MOTd, V5 in my name. Steel-bodied back halved street-legal race car. Fibreglass front end, wings, bonnet and boot. Steel doors. 454 BBC, 4 bolt mains block plus 30, KB 10.8:1 pistons, LS7 rods with 7/16 rod bolts, steel crank, twin roller timing chain set, comp cams solid flat tappet 550 lift cam, rectangle port, closed chamber cylinder heads, recent valves, springs and retainers, arp bolts, Weiand team g intake, MSD distributor and digital 6 ignition, Hooker super comp headers, Flowmasters…. TH400 reverse pattern transbrake transmission, Cheetah shifter, Dedenbear controlled air shifter, TCI anti balloon converter. 9'' braced ford rear end with strange shafts on ladder bars, strange aluminium centre section, spool. Wilwood front discs, hubs and calipers, master cylinder. Line lock. Drag shocks. Nightfire red with graphics by pro sign in gold leaf. The graphics are stunning, the paint really needs refreshing although it’s still very presentable. weld ProStar wheels, polished, 15 x 15, 5 x 15, MT sportsman pro tyres, almost new... 8.50 cage (out of tag at the moment but will re tag no problem) Jaz seats, DJ harnesses. Autometer gauges. Over £10,000 recently spent during my ownership on lots of improvements to make the car much more street-friendly including but not limited to:- Fintech 1200 power adder fuel injection, Aeromotive A1000 pump and regulator. External charge pins. Bump button. Serck Motorsport custom aluminium radiator/spal fans/oil cooler. oil cooler still needs piping up, all parts included. Mocal trans cooler. Rear disc conversion complete with full parking brake provision, trick twin electronic parking brake conversion. Rear QA1 double adjustable shocks and springs. GPS speedo. All new steering links. K&N Xtreme air filter. Fabricated valve covers. Headlamp dip switch needs replacing, (new one included in sale). This car is an absolute eyeful, gets a huge amount of attention wherever I take it, very fast and now very streetable, not for the shy or faint of heart. Very reluctant sale but needs must.... your chance to own a piece of UK drag racing history, £27000 firm. 07973 740076, 8am to 8pm only please, absolutely no time wasters, I do not have the time or patience, however, genuine buyers are most welcome, thank you.
Contact: Michael Country: United Kingdom	Email: click here Tel: 07973 740076

Date: 2/10/2022 2:15:34 PM	Ref: 00017442
Junior Stock Dragster For Sale X Odyssey Batteries Junior Dragster Hauser Built Chrome Moly Chassis suitable up to 7.90 Cockpit/Roll Cage suitable for 8 to 17 Years Old Briggs 206 Stock Engine New Slicks with 10 Passes Safety Harnesses out fo date Turn-Key Junior Stock 11.90 from age 8 years. Some Spares Comes with Enclosed Braked Box Trailer Location Border of West Yorkshire/Lancashire £3650 ovno
Contact: Paul Country: United Kingdom	Email: click here Tel:

Date: 1/26/2022 8:46:12 AM	Ref: 00017441
67 Plymouth Satellite full chassis for sale '67 Plymouth satellite tube chassis car. Everthing is brand new and top end. A massive jump ahead if considering a new car and a considerable saving. Easy to finish, hard work done and the serious money spent. Just short of some tin work, body work, plumbing and wiring. Fully rolling, unlimited cert, 6.0 and faster chromemoly tube chassis car. Spec as follows, Full advanced cert moly chassis with double frame rail, adjustable ride height strut cups, pro mod/ pro stock 1/2" hole 4link plates, only NAS bolts used. Motor plates for Hemi and 4.84/ 5" bore space GM. Mounted for 727, powerglide or TH400 transmissions but could easily install Lenco or liberty if desired. Fully fabricated moly rear housing with pro mod/ pro stock 4link incorporating adjustable ride height. Strange pro series rear brakes. 40 spline gun drilled axles. Strange ultra pro mod 9.5" center section. Strange rear double adjustable shocks. Pro Mod spec, anti roll bar, wishbone and 4link bars. Strange spindle mount front struts and strange front brakes. Seat, steering and pedals and master cylinder all mounted. The seat is a fully FIA approved autoclaved carbon fibre tillet, it cost over £2000. Weld V-series spindle mount front wheels, in black with brand new Goodyear front runners. Weld 15x15 Alfa 1 double beadlock rear wheels with black beadlock rings and centers. Incredibly lightweight. Currently with mock up tires. Built to run 33'' tires. Although a PS 33.5 will fit. The body is fully prepped to be fibreglassed. With some work you could potentially use the steel body but this was never my intention. It's a great looking body style and obviously unique. The tin work has been started, the firewall is fabricated but not installed. The center chassis belly pans are made and dzus tabs on the chassis. The lexan windows are made, as are the driver/ passenger moly bolt in window frames. Custom window net mounted. Lightweight radiator is mounted. This will be a beautiful car, brand new and never run. No expense spared during the build. It was going to be run in comp with my 740ci Fulton and glide. Price for the above is £23,000 GBP. Its parts come to more than that, let alone the time spent... I have a lot of other parts, everything to finish the car in fact, but will be offered to the buyer of the car first. These are not included and would need to be purchased on top of the car. From complete nitrous pro mod fuel system, Full power grid ignition, racepak, all brake line components, shifter, billet wiring module, carbon pro mod tubs, even down to chutes ect, ect, once again all brand new... the 740ci motor is for sale in the parts section and I have a PM powerglide that we ran behind it also when in PM. Only selling due to no time and business commitments.
Contact: Nick Country: United Kingdom	Email: click here Tel: 07586 836102

Date: 1/24/2022 11:29:23 AM	Ref: 00017440
Cars for sale - Nostalgia FC and Willys Coupe Richard Hartman / Bill Felstead built fuel altered / Nostalgia Funny Car. This was Venom NFC from 2020 that has been repaired by Bill. Comes complete rolling or can do with 1970 Camaro body. 9” floating rear end. Rolling £15,000 or with body and tin work £20,000. 1941 Glass Willys Coupe rolling on a new Art Morrison chassis. Body all fitted with trunk lid. Got lights, Grill and much more. Vosa registered £20,000. Brad Anderson billet block with one small repair plus Bryant crank from Tim Wilkerson just been ground -10. £5,000. Alky clutch complete £1500 Petrol golf cart great condition £750
Contact: Tony Country: United Kingdom	Email: click here Tel: 07384 257830

Date: 12/27/2021 2:10:24 PM	Ref: 00017437
Red Victor 3 World-famous car. Absolutely the best of everything. IVA tested, street legal in the UK. Hugely documented throughout its life. There is too much to list so see spec here: https://www.redvictor1racing.co.uk/index.php/the-car-mainmenu-26 Comes with spares if the price paid is the correct one. In dry storage with all the rockers/pushrods taken out. Best ET 5.87 @263.75mph. Consistent 5-second car even at 3050 lbs. Has plenty of potential left with the right owner. Easy 5.60's at 270mph at a lighter weight. Will be sad to see it go but I reached where I wanted to be with it. Only very serious offers for this. Don't take the piss or it will be given back. GBP160,000 or the very nearest offer. To build a car like this is 250k+. Be a 5-second hero... Mail me or call.
Contact: Andy Country: United Kingdom	Email: click here Tel: 07921 558141

No more advertisements in this category

Eurodragster.com aims to bring you links to all the best European Drag Racing web sites. To add your site to Eurodragster's listings, simply email [email protected] with your URL and a little information about your site and we'll do the rest. When you update your site, drop us a line at [email protected] and we'll feature your site in our "What's New" section.

Eurodragster.com is a non-profit-making organisation run by a small group of Drag Racing enthusiasts for the sole purpose of promoting European Drag Racing. If you can help us to meet the modest cost of hosting this web site by advertising here, please email [email protected]. We're sure you'll find our rates extremely competitive.